Bargain Bin

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)

The MultiStar White edition multirotor propeller started as an optimized blade design for the target motor/RPM combinations in Multirotor use. After comparing a host of construction options, a wood core was selected for its super stiff property’s, light weight and vibration resistant properties.

The MultiStar White Edition Propellers come packaged in a set of two CW/CCW and matching mounting hardware and thrust washers. The high visibility White color adds safety and style to your multi-rotor setup.

Specs:
Size: 9.4X4.3
Mounting Style: Hub Style with CW/CCW shaft nuts included 

Included:
One CCW and one CW propeller
Mounting Hardware and thrust washer (DJI Style shaft nuts)

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

Possibly one of the hottest debates in recent R/C history...balsa or foam? This is the shirt all of you balsa bandits have been waiting for. Slap your foamy friends across the face and tell them to read this.

Size: Large

*Note: Other sizes available

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug

Spice up your Turnigy ActionCAm with these high quality original replacement faceplates in a wide variety of colors. Swapping out these faceplates is a breeze, simply pop off the original and snap on the new. With these optional faceplates you can easily make your Turnigy ActionCam match your favorite color, your model or even your outfit!

Spec.:
Color: Bronze

Doll Stand - Basher PBull 1/18 4WD Desert Buggy

Clear Body - Basher PBull 1/18 4WD Desert Buggy

Option Alu. Steering Knuckle Arms - Basher PBull 1/18 4WD Desert Buggy (2pcs)

TrackStar Shock End Caps 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Suspension Spring Retainer 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Big Bore Suspension Spring Retainer 13mm (4) S124103

Compatible with the following Shock Absorbers
S124300, S160323, S160326

TrackStar Shock Bottom Cap Set with O-Ring S120052

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100, S124300, S160323, S160326

TrackStar Hardened Shock Shaft (x4)

Specs:
Diameter: 3.2mm
Length:48mm

Compatible with the following Shock Absorbers
S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.8Kg
Color: Red

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:55mm
Spring Rate:  1.5Kg
Color: Silver

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 55mm
Spring Rate:  1.2Kg
Color: Gold

Compatible with the following Shock Absorbers
S160023, S160026, S160323, S160326

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 65mm
Spring Rate:  2.1Kg
Color: Red

Compatible with the following Shock Absorbers
S160085, S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 65mm
Spring Rate:  1.8Kg
Color: Silver

Compatible with the following Shock Absorbers
S160085, S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:65mm
Spring Rate:  1.5Kg
Color: Gold

Compatible with the following Shock Absorbers
S160085, S160100

TrackStar Suspension Spring (x4)

Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length:65mm
Spring Rate:  1.2Kg
Color: Blue

Compatible with the following Shock Absorbers
S160085, S160100

The QE58-2 is a great micro 5.8GHz selectable 25mW ~ 200mW video transmitter. Small enough to fit on most multi-rotors but can also be used on other platforms.

This QE58-2 transmits a full range of 40 channels, weighs less than 17g (with supplied antenna) and incorporates a 5V power output for video cameras. Great for all FPV conditions. 

Selectable 200mW feature is activated by snipping the jumper wire in the bottom right hand corner of the VTX board.

Features:
• Micro sized and lightweight (7.5g)
• Easy install, plug and play
• Push button control instead of switch to change channels
• Selectable 25mW's ~ 200mW's (23dBm, +/-1dBm) of clean output power
• 5V Output for camera
• 40 Channels
• Microphone

Specs:
Modulate: Wideband FM
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Transmitter power: 25 ~ 200mW (23dBm, +/-1dBm)
Frequency range: 5645-5945MHz
Operating Voltage: 7~20V (2S~5S LiPoly)
Input current: 200mA
Output Voltage: 5V
Operating Temperature: -10~85deg C
Video Band Width: 0~8MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0Vp-p
Audio Input Impedance: 10K Ohm
Weight: 7.5g
Antenna Connector: SMA Female
Size (LxW): 31x22mm (excluding antenna)

Included:
1 x Quanum ELITE QE58-2 5.8GHz Selectable 25mW ~ 200mW Wireless AV Transmitter
1 x SMA antenna
1 x Power in and video cable

Channels:
Band A: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
Band B: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band C: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band D: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
Band E: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866

The Quanum Elite X50-2 transmitter packs 200mW of ultra clean 5.8GHz power for your FPV kit! This is a must have Tx for those who are looking for longer range.

The X50 transmits on the full range of 40 channels and has an easy to use channel switching system.

The unit comes in a unique metal alloy case that is not only damage resistant but also acts as a heat sink.  The case also has fixing points so that the unit can be bolted to your model making it far more secure.

A key feature of this system is the R Band also known as race band, which is 37mhz apart from the next channel, all 8 sub-channels in R Band will not interfere with each other, this is great news for FPV racers. 

Features:
• Bulit-in microphone 
• Super mini, light weight only 12.5g 
• Five bands 40 channels with R-Band 
• Elegant design with CNC aluminum case 
• One switching button for band and channel selection
• Vertical antenna connection

Specs: 
Video format: NTSC/PAL 
Antenna connector: SMA female connector (Vertical)
Power input: 7-20V (3S LiPo battery suggested) 
Power output: 5V 
Output impedance: 50 Ohm 
Transmitting power: 200mW 
Frequency range: 5645-5945Mhz 
Working current: 200mA at 12V 
Video bandwidth: 8Mhz 
Audio carrier frequency: 6.5Mz 
Audio input impedance: 10K Ohm 
Dimensions: 32x24x9.4mm
Weight: 12.5 grams

Frequency Range:
FRA: 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz, 5880MHz 
FRB: 5705MHz, 5685MHz, 5665MHz, 5645MHz, 5885MHz, 5905MHz, 5925MHz, 5945MHz 
FRC: 5865MHz, 5845MHz, 5825MHz, 5805MHz, 5785MHz, 5765MHz, 5745MHz, 5725MHz 
FRD: 5658MHz, 5695MHz, 5732MHz, 5769MHz, 5806MHz, 5843MHz, 5880MHz, 5917MHz 
FRE: 5733MHz, 5752MHz, 5771MHz, 5790MHz, 5809MHz, 5828MHz, 5847MHz, 5866MHz  

Includes:
Quanum Elite X50-2  5.8GHz 40CH 200mW Wireless AV Transmitter 
Antenna 
Cable 
Manual

Aluminum Rear Lower Suspension Arm (2Pcs/Bag) - A2003T, A2027, A2029, A2035 and A3007

Battery Support/Bumper Bracket F/R - A2023T, A2027, A2029 and A2035

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

Aerostar Composite Propeller 13x4 Bone (CCW) (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

Pulse / Heart Rate Sensor Module for Arduino

Specs:
Dimensions: 15 x 2mm
Weight: 2.66g

Perfect for snorkeling, diving, surfing or any other water based activity where you want to use your Gopro Hero 4 Session to capture the action.  

Made of clear heavy duty plastic, the housing has been designed to allow funtional control of the camera and comes with a heavy duty rubber seal that provides the housing with a depth rating of 40 metres.

Specs:
Material: Heavy duty clear plastic
Weight: 55g
Dimensions: 48 x 48 x 46mm

On screen display (OSD) module for Shark X6/X8 flight controllers.

Specs:
Input voltage: 5V DC
Operating Temperature: -10°C ~ 50°C
Cable length: 130mm
Dimensions: 33 x 20 x 11mm
Weight: 10.5g 

Included:
OSD module

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.

You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.

This model is activated by light sensor and will respond to a flashlight or other direct light source.

Includes:
1 x Light controlled robot car kit 

Note: This robot does not require programming.