Bargain Bin

The RMILEC Adapter Converter Board is the perfect solution to allow easy connection to an SBUS receiver. The T4363NB18 adapter supports 5V power supply and can be used not only for matching 12FG or 14MZ transmitters but can also be individually placed in another location as a relay station.

The board is supplied complete with hardware including, JST battery connectors, on/off switch, terminals, fixtures and fittings.

Please note: soldering of on/off switch and terminals is required.

Specs:
Material: PCB
Weight: 39.65g
Dimensions: 90 x 115mm

Aluminum alloy neck strap adjuster suitable for DJI transmitters or similar.

Futaba Trainer Cable (Buddy Box Cable) 2.8m

The Turnigy Voltage Protector helps prevent your receiver from dropping below its required operating voltage. This helps to eliminate "brownouts" and prevents your receiver from rebooting. It will also help reduce the load on your ESC's BEC and reduce the likelihood of glitching. Simply plug it into any spare channel on your receiver.

Operating Voltage : 3.2V - 11.1V (1s ~ 3s LiPo)
Capacitor voltage: 16v
Storage Capacity: 3300uf
Weight: 6.1g

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System

Spare Part - RC adapter plug for MPX for Scherrer LR UHF System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

The HobbyKing® ™ GT2E is a affordable, 2-channel 2.4ghz ground radio, with adjustable steering dual-rate and servo reversing, making it a very simple setup for your car or boat. The automatic frequency hopping digital system provides a strong, reliable 2.4ghz signal, so rest assured you'll always be in control. Included in the package is a 3-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions.

Features:
• Reliable, interference free 2.4GHz AFHDS signal operation
• 2CH operation
• Use only 4xAA batteries for transmitter
• Adjustable steering dual-rate
• Simple binding procedure

Transmitter Specs:
RF Power: 20dBm (100mW) max
Modulation: GFSK
System Type: AFHDS 2A
Sensitivity: 1024
Low Voltage Warning: Yes
DSC Port: 3.5mm
Charge Port: Yes (3.5IN)
Power: 4xAA, 6VDC
Weight: 241g

Receiver Specs:
RF Receiver Sensitivity: -105dBm
Modulation: GFSK
System Type: AFHDS 2A
Sensitivity: 1024
Failsafe: Yes (Channel 2)
Power Port: Yes (VCC)
Power: 4.5~6.5 VDC 
Weight: 5g
Antenna Length: 26mm
Dimensions: 37x22x12mm

Includes:
HK-GT2E transmitter
HK-GT2E 3CH receiver
Antenna tube
Bind plug
User manual

Reliably monitor the voltage of your battery with the Turnigy TGY-CVT01 Voltage Sensor.

As a great alternative to setting a timer, fly or drive your model based on the actual voltage of your battery. This way if your voltage drops quicker than usual due to harder running, you can avoid over discharge your pack. Or, perhaps you're having a nice relaxed day? Enjoy longer run times and don't cut yourself short.

This small, compact sensor is also a perfect way to add piece of mind when running a high performance model by allowing you to check that the battery voltage isn't dropping excessively under load.

For use with the TGY- i10 and i6 transmitters and TGY-iA10 and i6 V2 receivers.

Designed to daisy chain together with other TGY-C series sensors.

Features:
• High quality, compact sensor
• Futaba style input and output connectors
• Great for monitoring battery voltage, no need to set timers anymore
• Works with TGY- i10 and i6 transmitters and TGY-iA10 and i6 V2 receivers

Specs:
Voltage Range: 0~100V DC
Accuracy: +/- 0.1V
Input Voltage: 4.0~6.5V
Working Current: 9mA
Lead length: 195mm
Size: 31 x 15 x 8.5mm
Weight: 6.25g (inc leads and sensor)

The HobbyKing® ™ GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries!

Features:
• Reliable, interference free 2.4GHz AFHDS signal operation
• 3CH operation
• Rechargeable li-ion transmitter battery
• Interchangeable rubber hand grips
• Adjustable steering dual-rate
• Servo reversing

Transmitter Specs:
Model: Car/Boat
RF Power: 20dBm (100mW) max
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
Low Voltage Warning: Yes
Charge Port: Yes (USB- charge cable included)
Power: 3.7V 800mAh li-ion (included)
Weight: 270g

Receiver Specs:
Model: Car/Boat
RF Receiver Sensitivity: -105dBm
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
Failsafe: Yes
Power Port: Yes (VCC)
Power: 4.5~6.5 VDC 
Weight: 5g
Antenna Length: 26mm
Dimensions: 37.6 x 22.3 x 13mm

Includes:
HK-GT2B transmitter
HK-GT2B 3CH receiver
3.7V li-ion rechargeable battery pack
Optional second rubber hand grip
Antenna tube
USB charge cable
Bind plug
User manual

Especially made for FlySky FS-i10 and our Turnigy i10, this sun shade will enhance visibility of your LCD touch screen.

Simply peel and stick and fit directly around the screen area.  The shade collapses easily for storage/transport. 

Alloy Anti-Slip TX Control Sticks Short (M4 for JR TX - Purple) - 12mm long + locknut, Total: 24mm

Alloy Anti-Slip TX Control Sticks Long (M4 for JR TX - Purple) - Complete with Locknut, 29.5mm Long

Alloy Anti-Slip TX Control Sticks Short (M4 for JR TX) - 12mm long + locknut, Total: 24mm

Alloy Anti-Slip TX Control Sticks Long JR TX (M4 Thread - Red) - Complete with Locknut, 29.5mm Long

Alloy Anti-Slip TX Control Sticks Short (M3 for Futaba TX - Blue) - 12mm long + locknut, Total: 24mm

Turnigy 9XR FPV Monitor Mounting Arm.

A mounting arm specially designed to hold Telemetry units or FPV Monitors on
top of your 9XR.
Compatible with most standard FPV monitors and our Quanum Telemetry system.

*Requires the 9XR Transmitter Stand (see related items)

Trainer Port/RF PCB Assembly - Turnigy 9XR Transmitter

Mask (Chrome) - Turnigy 9XR Transmitter

Trim Tabs - Turnigy 9XR Transmitter (4set)

This is a stock replacement for your Turnigy 9XR transmitter faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Silver

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic red

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Gold

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic blue

Transmitter Neck Strap Adaptor (Blue)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.