Charger Accessories

MPX Connector to T-Connector Battery Adapter Lead(2pcs)

This adapter will convert a MPX Connector equipped battery to a T-Connector for use with an T-Connector equipped ESC or an T-Connector Charge lead.

XT90 Battery Harness 10AWG for 2 Packs in Series

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT90 Battery Harness 10AWG for 2 Packs in Parallel

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

Power your compatible electrical items with the 4mm HXT to DC jack converter. The DC Jack converter has two 2mm jack plug connectors (positive centres) and is ideal for powering chargers or similar electrical items.

Specs:
Length: 210mm
DC Jack: 2mm
Battery Connector: 4mm HXT

2.1mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.1mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

2.5mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.5mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

2.1mm DC Power Plug to 2.1mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.1mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.1mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs

2.5mm DC Power Plug to 2.5mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.5mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.5mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs

1.3mm DC Power Plug to 2.1mm DC Power Socket Adapter (2pcs)

Specs:
Plug Internal Diameter: 1.3mm
Plug External Diameter: 3.5mm
Plug Length: 10mm
Socket Internal Pin: 2.1mm
Socket Internal Diameter: 5.5mm
Overall length: 160mm
Max rating: 1amp @ 12V
Quantity: 2pcs

1.3mm DC Power Plug with 15cm Lead (2pcs)

Specs:
Internal Diameter: 1.3mm
External Diameter: 3.5mm
Plug Length: 10mm
Overall length: 35mm
Wire: Red/Black 150mm
Max rating: 1amp @ 12V
Quantity: 2pcs

The popular T style plug and socket has been improved with the addition of clip-on insulating caps. These caps replace the need for heatshrink tubing and will accommodate up to 10awg wire.

XT-60 Plug Harness for 2S Hardcase Saddle pack Lipoly Batteries

Discharge Plug: XT-60
Battery Plugs: 4mm Bullet Connetor
Balance Plug: JST-XH

Most standard 7S lithium polymer battery packs feature two balance ports, a 4S and 3S balance lead (total 7S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 7S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 4S and 3S individual plugs from your pack, and combines them to one single 7S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 1 x 4S and 1 x 3S JST-XH balance plug
Output: 7S JST-XH balance plug
Length: 100mm

Most standard 6S lithium polymer battery packs feature two balance ports, 2 * 3S balance lead (total 6S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 6S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 2 * 3S individual plugs from your pack, and combines them to one single 6S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 2 x 3S JST-XH balance plug
Output: 6S JST-XH balance plug
Length: 100mm

This is an all-in-one balance board adapter that allows you to balance charge 2~6S lipoly batteries with Thunder Power/Flight Power, Hyperion, JST-XH and JST-EH balance plugs. This makes it simple and eliminates the need for carrying separate balance adapters for each type of battery.

Specs;
Cell Count: 2~6S (7.4~22.2V)
Balance Connector Type: TP/HP/XH/EH

*Note: Can only be used to balance one type (TP/HP/XH/EH) at a time. Do not connect more than one type of balance leads to adapter board at same time or damage may occur.

T-Connector Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 9.0g

XT60 Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 11.2g

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

JST-XH to JST LED Power Distribution Lead - A neat way to power LED's from 3s Lipoly's using the balance plug.



** WARNING: Check Polarity of your setup before connecting this harness.

This adapter will convert a T-Connector equipped battery to an XT60 for use with an XT60 equipped ESC or an XT60 Charge lead.

This handy connector set will be appreciated by anyone who is dealing with 'Header Pins' on Multirotor boards or any othe type of PCB.

This set consists of a 1 pin housing and 1 female terminal.

Flat style 'AAA' battery holder, holds 4 cells

This binding post set (1 Black, 1 Red) is ideal for building your own charging station or as a 12-24volt power access point for DC power applications.

They are designed to pass through wooden or metal facias up to 10mm thick (they are insulated and required a 7mm mounting hole). 

The output terminals have 4mm holes to suit 4mm male banana plugs, the terminal tips can be removed to allow aligator clamp access, the screw on terminal caps are insulated with a hard plastic shell.

Rated to around 50amps.

Spec:
Total length: 33mm
Depth: 10mm
Mounting hole: 7mm

HXT 4mm to T-Connector Battery Adapter Lead (2pc)

This adapter will convert an HXT 4mm equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 7g (Each)

This adapter will convert a 5.5mm Bullet Connector equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 9g(Each)

This adapter will convert a T-Connector equipped battery to an HXT 4mm for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

This adapter will convert an HXT 4mm equipped battery to an XT60 for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

Finally, a simple solution to mis-matched plug types! This very neat, short one piece adapter is an easy way to convert your T-Connector to XT60. Simply plug your model's T-connector on the ESC into the back of this adapter and you can then use batteries with XT60 plugs in your model, it's that easy!

We have designed these plug adapters in-house and paid for the molding. This allows us to keep costs low and they are exclusive to HobbyKing, meaning you will not find these XT60 plug adapters anywhere else!

The XT60 adapters are made from high-temp nylon and gold plated spring connectors, both are included in the injection molding process at the time when forming the connector.

This set includes:
2 x XT60 Male to T-Connector Adapter Plug

Finally, a simple solution to mis-matched plug types! This very neat, short one piece adapter is an easy way to convert your EC3 plug to XT60. Simply plug your model's EC3 plug on the ESC into the back of this adapter and you can then use batteries with XT60 plugs in your model, it's that easy!

We have designed these plug adapters in-house and paid for the molding. This allows us to keep costs low and they are exclusive to HobbyKing, meaning you will not find these XT60 plug adapters anywhere else!

The XT60 adapters are made from high-temp nylon and gold plated spring connectors, both are included in the injection molding process at the time when forming the connector.

This set includes:
2 x XT60 Male to EC3 Adapter Plug

4.0mm to 4.0mm Gold Male to Male Adaptor (5pc)

Mini T-connector charge lead with 4mm banana plugs.

Specs:
Weight: 15g
Lead Length: 300mm
Wire Gauge: 16AWG

A handy adapter to convert an EC5 equipped battery to a T Plug connector. Useful for use with a T plug equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

Mini Tamiya to T-Connector Battery Adapter (2pcs/bag)

This adapter will convert a Mini Tamiya equipped battery to a T-Connector for use with a T-Connector equipped ESC or a T-Connector Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)