Assorted Accessories

The guys at Bat-Safe are RC enthusiasts and came up with a safe and awesome solution to store, transport, and most importantly charge your LiPo batteries.

The ISDT BG-8S Smart Battery Checker is a new style of multipurpose battery checker. It is specifically designed for hobbyists of Remote Control products. It comes with lots of great features to help check your batteries, and receiver signals and even has a USB output that allows you to charge your phone or other devices. The Battery Checker has a 2.4” 320x240 display that can easily be seen in sunlight and has an easy-to-use menu system to show all functions and data.

For several years we have been selling the very popular Bat-Safe charging box, it has been so successful that we can now offer a smaller, more compact version. These double-walled, insulated boxes have been designed by engineers who know how dangerous a LiPo battery fire inside a home can be. The guys at Bat-Safe are RC enthusiasts and came up with a safe and awesome solution to store, transport, and most importantly charge your Lipo batteries. With a double steel wall, fiberglass, and steel wool filter to capture the smoke and soot, they combine to control the intense heat and arrest the flames if ever you are unlucky enough to have a problem whilst charging.

This is an all-in-one balance board adapter that allows you to balance charge 2~6S lipoly batteries with Thunder Power/Flight Power, Hyperion, JST-XH and JST-EH balance plugs. This makes it simple and eliminates the need for carrying separate balance adapters for each type of battery.

Specs;
Cell Count: 2~6S (7.4~22.2V)
Balance Connector Type: TP/HP/XH/EH

*Note: Can only be used to balance one type (TP/HP/XH/EH) at a time. Do not connect more than one type of balance leads to adapter board at same time or damage may occur.

Flat style 'AAA' battery holder, holds 4 cells

4.0mm to 4.0mm Gold Male to Male Adaptor (5pc)

Turnigy Programmable Lipo Battery Warmer Bag - Lipo's can lose up to 40% of their capacity when used in cold weather. This of course will drastically shorten flight/drive times and of course performance. This superb Turnigy lipo warmer is perfect for the RC enthusiast who is flying/driving in cold weather/climate and also for competition pilots/drivers looking to squeeze every ounce of capacity from their battery for optimum performance, even in warm ambient temperatures.

You can select the desired temperature via the simple to operate buttons/LED display on the front of the bag, the inbuilt microprocessor offers a 7 step heater range from 25ºC ~ 45ºC (77ºF ~ 113ºF) and the sealable bag, which is lined with a heat reflective material, keeps your lipo snug and ready to use.

Specs:
Input Voltage: 10v ~ 13v DC
Idle Current: <30mAh
Working Current: 2A
Programmable Temp Value: 25/27.5/30/32.5/35/40/45ºC (2 button -/+ operation with LED display)
Operating Temp: -10ºC ~ 45ºC
Dimensions Overall: 295mm x 230mm
Dimensions Lipo Cavity: 195mm x 230mm
Weight: 135g
Connector: XT-60 + Croc Clip Lead (supplied)

We've all done it before, you power up your model with a battery that you were certain was fully charged, but suddenly your model goes into LVC shortly after take-off, forcing you to make an emergency landing. It's very easy to lose track of which battery packs are charged and which aren't when you bring a box full of them to the field.

We now have a solution, the Turnigy Battery Charge Marker! This handy accessory sticks on to your battery pack with double sided tape and stays firmly in place. It features a sliding tab that simply and easily indicates whether or not your battery is charged. When you finish charging your pack, slide the tab to show the Green color (charged), when you take the battery out of your model after use, slide the tab to show the Red color (discharged). It's that simple!

Specs:
Dimensions: 25x12x3mm
Weight: 0.3g

10pcs/bag

The Hobbyking Cell Checker is a quick and easy way to check your LiPo batteries before and after use. Simply connect the balance plug of your pack to the pins on the cell checker, and it will display the individual cell voltage for up to 6 LiPo cells. It will also at the end of the cycle show the total voltage of the battery pack.

Simple to use Lipoly low voltage alarm that is small and light for on board use. This plugs into the balance lead for detecting low voltage on individual cells.

A loud alarm will sound and the LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~3s
Size: 38x20x10mm
Weight: 5g
Voltage Accuracy: 0.03v
Low Voltage Alarm Threshold: 3.3v (per cell)

Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~6s
Size: 38x25x11mm
Weight: 9g
Low Voltage Alarm Threshold: 3.3v (per cell)

XT30 Male Connector w/24AWG Silicone Wire 55mm (1pc).

4mm Solder Type Banana/Charge Plug (2 pairs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

The ToolkitRC MC8 Advanced Multifunction Battery Checker is packed full of features and has a large color screen for complete battery status at a glance. This multifunctional checker can check the status of 1 cell, to 8-cell battery packs, has one-touch battery balancing, and can read output signals for PWM, PPM, or SBUS, as a receiver checker. The PWM output can also be used as a servo tester, and the MC8 can even fast charge your mobile devices via its USB-C 20W output port.

The ToolkitRC SC100 adapter cable is used for powering low-wattage battery chargers or other devices with an XT60 input connector from a USB-C power supply at up to 100W.

Specs:
Type: ToolkitRC SC100 XT60~USB-C Protocol Cable
Input: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Output Voltage: 5~20V max
Output Current: 5A max
Output Connector: XT60
Length: 50cm
Weight: 35g

Simple to use Lipoly low voltage alarm that is small and light for on board use, plug's into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~4s                              
Size: 38x25x11mm  
Weight: 7g
Voltage Accuracy: 0.03v
Low Voltage Alarm Threshold: 3.3v (per cell)

A precise balancer, discharger, and cell monitor. The Hobby King Battery Medic is a high-quality device for customers who want precision checking and balancing of their battery packs.
The unit can measure, discharge, and balance Lipoly packs up to 6S.

Spec.
Size: 93.5 x 60 x 17mm
Battery types: Li-polymer (2 ~ 6 cells)
Cell voltage range: 2.0v ~ 3.9v
Discharge: 3.0v ~ 4.2v
Bleed Current: 200~450mA

This is an original unit, calibrated at the factory.

HobbyKing®™ Fire Retardant LiPoly Battery Bag (170x45x50mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag, but superb for encasing your battery when it is installed on your model if the untoward ever happens.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 170mm
Width: 45mm
Height: 50mm
Weight: 52.5g

HobbyKing®™ Fire Retardant LiPoly Battery Bag (Flat) (230x140mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 230mm
Width: 140mm
Height: Flat
Weight: 49.5g

Turnigy® Fire Retardant LiPoly Battery Bag (Zippered) (200x155x95mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire-retardant thread and have a zippered lid.

Protect your family and home from the hazards of LiPo charging. This LP-Guard bag is a fireproof bag designed to stop and contain fires caused by incorrectly or poorly functioning LiPos, especially during charging.

We urge all customers to always practice extreme caution when charging and never leave a charging LiPo battery unattended.

This is a small bag at 18x23cm that can fit three 2200mah 3S1P LiPo packs comfortably.

The LP-Guard is made from a fiberglass woven fabric, that is similar to fireproof suits worn by some firefighters.

LiPoly batteries are a fantastic power source for all of our RC needs, but do need to be treated with respect due to their phenomenal energy density.

The golden rule when charging LiPoly packs is never to leave them unattended, but you can improve on this by using one of these fire retardant charging bags so that, should a mishap occur any conflagration will be contained within the bag and cannot impinge on surrounding surfaces.

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Features:
• Tough, fire retardant construction
• Large size for bigger packs
• Hook and Loop top fastenong
• Easy to store when not in use

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 330mm
Width: 250mm
Weight: 135g

MultiStar Fire Retardant LiPoly Battery Bag (Flat) (210x165mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 210mm
Width: 165mm
Height: Flat
Weight: 55g

Turnigy® Fire Retardant LiPoly Battery Bag (190x68x50mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag, but superb for encasing your battery when it is installed on your model if the untoward ever happens.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 190mm
Width: 68mm
Height: 50mm
Weight: 66.5g

2.1mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.1mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

2.5mm PCB Mounted DC Power Socket (5pcs)

Specs:
Internal Pin Diameter: 2.5mm
External Socket Diameter: 5.5mm
Length: 14mm
Height: 11mm
Width: 9mm
Max Rating: 1amp @ 12v
Quantity: 5pcs

2.1mm DC Power Plug to 2.1mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.1mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.1mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs

2.5mm DC Power Plug to 2.5mm DC Power Socket Extension Lead (2pcs)

Specs:
Plug Internal Diameter: 2.5mm
Plug External Diameter: 5.5mm
Plug Length: 12mm
Socket Internal Pin: 2.5mm
Socket Internal Diameter: 5.5mm
Overall length: 1m
Max rating: 1amp @ 12V
Quantity: 2pcs