DC Only

This Turnigy balance charger is simple to use, reliable and safe for any modeler. It features smart charge protection to ensure the batteries are not overcharged and has real-time monitoring increasing the cycle life of your battery packs. It can be powered from any 12V output and charges at 800mA. Charging is through the JST-XH balance lead on your compatible battery. Suits all Turnigy, Zippy, and most other battery types. You can easily connect several of these chargers to the same power source to charge multiple packs at once.

Why settle for only being able to charge your DJI Phantom 2 batteries at home?

The Quanum DC Field Charger charger allows you to quickly and easily charge your Phantom 2 batteries at the field from just about any 10~26VDC power source! This means easy battery charging from your car or truck's starter battery!

Simply connect the alligator clips to your vehicle's starter battery and the output lead to the Phantom 2 battery. The output lead features a polarity-protected plug which prevents improper connection. This charger provides up to 4A of current, matching that of the original DJI Phantom 2 battery charger.

The ISDT BG-8S Smart Battery Checker is a new style of multipurpose battery checker. It is specifically designed for hobbyists of Remote Control products. It comes with lots of great features to help check your batteries, and receiver signals and even has a USB output that allows you to charge your phone or other devices. The Battery Checker has a 2.4” 320x240 display that can easily be seen in sunlight and has an easy-to-use menu system to show all functions and data.

The Turnigy Quad 4x6S can charge four battery packs simultaneously! The packs can be of a variety of types, such as Lilo, LiPo, LiFe, LIHV, NiMH, NiCd, and Pb. A quality-designed charger with accurate balancing and a familiar, intuitive menu system.

The IMAX B6 V2 follows the lineage of the original B6 but has been improved by increasing the maximum charge power from 50W to 60W, and the maximum charge current from 5A to 6A. Another addition to the V2 is an "AGM Charge" for charging AGM Pb batteries and a "Cold Charge" for charging Pb batteries in cold weather. AGM Pb batteries can be charged up to 5 times faster than conventional Pb batteries, this mode enables this different higher charging rate process. When charging Pb batteries in cold weather special consideration is also required, a cold Pb battery requires a higher charge voltage than when it is warmer, the V2 will also sort this for you when the "Cold Charge" mode is selected. Another additional feature is the "DJI Battery Program", which allows you to charge DJI Mavic TB4X batteries using your B6 charger.

The HOTA range of chargers/dischargers is quickly becoming renowned for their quality, reliability, and numerous great features. This amazing dual charger/discharger can charge up to 2 x 300W all in a tiny package measuring 111x70x45mm and weighing just 292g. It offers loads of protection to safeguard against damaging itself or your battery packs such as temperature protection, capacity protection, input and output reverse protection, short circuit protection, and much more. See the attached user manual for the full list of features and protections.

The ISDT Q8 packs a real punch, with the ability to charge 8 LiPo, LiIon, or LiFe cells, and 7 LiHv cells at up to a staggering 30A (1000W max). It features an up-to-date touch screen that accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging/discharging features with ease. This allows for fast, and easy programming and is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 2.4" IPS LCD screen, this also has a viewing angle of up to 178°. 

The ISDT P20 has the ability to charge 2 x 8S LiPo, LiIon, LiFe, or 7S LiHv, 12S Pb, and 16S NiMh/NiCd battery packs up to 20A and a max of 500W per channel, each channel can operate independently of the other. You can even combine both channels in parallel for synchronous balance charging at up to 35A and 800W. The display accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging features with ease. This allows for fast, and easy programming which is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 3.5" IPS LCD screen which has a wide viewing angle. 

The HOTA range of chargers/dischargers is quickly becoming renowned for their quality, reliability, and numerous great features. This amazing 1000W 4-channel charger/discharger can charge 4 x 1~6S LiPo and batteries at up to 4 x 250W, or you can combine 2 outputs together to achieve up to 500W. It offers loads of protection to safeguard against damaging itself or your battery packs such as temperature protection, over-voltage, over-current, input and output reverse protection, short circuit protection, and much more (see the attached manual for the full list). It utilizes a highly optimized algorithm for charging management, and its advanced circuit design offers a 94% operating efficiency.

The ToolkitRC M9 is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), wattmeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M9 is lightweight and compact, and it operates on a 7~35V DC power supply which makes it perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M4 Pocket is an ultra-compact palm-size balance charger, despite its small size, it can charge a 1~4S battery pack at up to 80W. It is simple and intuitive to use, has an easy-to-read, wide angle, IPS 1.54"x240x240 pixel full-color LCD screen, and a simple, single programming button.

The ToolkitRC M7 is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, resistance measuring, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, and so much more. The M7 is lightweight and compact, and it operates on a 7~28V DC power supply which makes it perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M6D is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, and smart consumer-grade drone battery charging, it also has a multilingual user interface. The M6D is a DC unit only, so requires an input voltage of 7~28V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 30A.

The ToolkitRC M8S is a versatile, multifunction tool that integrates functions such as charging, discharging, resistance measuring, signal test/signal source for servo, and receiver testing, PWM/PPM/SBUS, ESC watt meter, smart consumer-grade drone battery charging, and so much more.  The M8S is a DC unit only, so requires an input voltage of 7~30V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 18A.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby