Tools, Bags & Storage

The GT power Multi-Function USB Jet fan Super Blower is the perfect tool for RC enthusiasts and for around the home. This very powerful, versatile 100,000 RPM blower is ideal for a variety of tasks, from blowing the dust and dirt from your RC car after racing or bashing, cooling down electronics, inflating tires, or blowing any moisture away if you have been racing through puddles. Around the home, this awesome tool is great for blowing up balloons, and other small inflatable toys, plus it is perfect for blowing the dust off of workshop benches, computer keyboards, etc.

T-Work's Basic Tool Kit (8pcs) TT-080

T-Work's Standard Tool Kit (4pcs) TT-080-P

• Lightweight screwdriver and aluminum handle
• Robust and easy to use

Contains 4 Pieces:

• Hexagonal screwdriver 1.5 mm
• Hexagonal screwdriver 2.0 mm
• Hexagonal screwdriver 3.0 mm
• Socket wrench 5.5 mm / 7mm

T-Work's Mini-Z Tools (4pcs) TT-080-MZ

• Lightweight screwdriver and aluminum handle
• Robust and easy to use

Contains 4 Pieces:

• Hexagonal screwdriver 1.5 mm
• Hexagonal screwdriver 0.05"
• Pozidrive screwdriver 3.0mm
• Socket wrench 4.5 mm

T-Work's Hexagonal Bits for Screwdrivers with Bit Holder (1.5,2.0,2.5,3.0) TT-081

• Delivered in a box
• Aluminum End Port
• Hexagonal Bits: 1.5, 2.0, 2.5, 3.0
• Compatible: Screwdriver bit

Solder Wire 1mm/3m - 17g,  63% Tin Content

The Hole Tapping Jig Set has been specifically designed for use with the RotorBits square 10mm tube. The jig slides neatly onto the square tube and can be secured with 4 locking screws (included) which will prevent the jig slipping once located in the preferred position.

The hole tapping jig set also includes a hole reamer, 2mm drill bit and 2mm thread tap.

Specs:
Jig Material: Steel
Jig Weight: 154g
Jig Dimensions: 100 x 16 x 20mm
Supplied Tools: Hole reamer, 2mm drill bit, 2mm thread tap

Soldering Station with Adjustable Heat Range

Specs Power Supply:
Power Consumption: 60W
Input Voltage: 110v
Output Voltage: 24v AC
Dimensions: 170mmx93mmx20mm
Temperature Range: 200c~480c/392F~896F

Specs Soldering Iron:
Power Consumption: 24v Ac-50w
Heating Element: Ceramic
Cord Length: 1.2m

R/C Helicopter Pitch Gauge, a must for when setting up your RC helicopter.

Specs:
Range: +12°, -12°
Material: Plastic
Suits: Most mini-helicopters

Remember the last time you were at the field and needed to make a quick repair to your foamy? This handy battery powered hot glue gun would have been just the tool for the job.

Operating on 12VDC, this glue gun can be powered by any standard 3S lipoly battery. It comes pre-fitted with an XT60 plug allowing you to easily connect to your Turnigy/Zippy lipoly battery. Everyone has a 3S 2200mAh battery in their field box, so you'll always have power for your hot glue gun. This tool is a must have for any flight box!

*Note: This glue gun does not feature a low voltage cutoff circuit, so we recommend using a low voltage battery alarm to monitor the input battery to avoid over-discharging. Please see related items below.

Specs:
Operating Voltage: 12VDC
Power: 10W
Power Plug: XT60

A lightweight, highly adaptable model aircraft stand, ideal for building, field assembly and storage of all but the largest of models (We've used these for models up to 2m long without any problems.)

The interlocking, all foam stand assembles in seconds, is flexible, strong and will not leave marks on your model.

Specs:
Length: 580mm
Width: 300mm
Height: 355mm
Weight: 530g

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g.

Tired of wrestling with two pairs of pliers or using a vise to help you try and obtain that perfect Z-bend for your control rods, only to end up with a half formed S shaped bend with too much middle in it for a Z bend allowing your control surfaces to slop around? Sound like some of the Zs you have made?
These pliers will give you a perfect bend, every time. It will handle toughened wire up to 1/16 (1.6mm) diameter.
These are heavy duty pliers, not small hobby workshop tools.

Get your Z-bends easy and perfect every time with the Z-Bend Pliers!

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 1.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The MultiStar Work Mat is a must have for any R/C hobbyist's work bench! Made from soft, grippy rubber and featuring ribbed compartments, it is perfect for containing small parts such as screws, nuts, washers and more. The backing is very grippy which will keep it from slipping on just about any surface. 

These smaller mats make excellent launch pads if you are taking off from uneven surfaces like grass or gravel.

The material is very soft and flexible allowing it to be easily rolled up for transport or storage. This makes it very easy to take with you to the race or field for on-site repairs. Never lose a screw again with the MultiStar Work Mat!

Features:
• Soft, grippy surface
• Ribbed compartments for containing small parts
• Flexible, can be rolled up for transport/storage

Specs:
Dimensions: 395 x 250mm

Have you ever struggled to see into confined or inaccessible voids to locate a lost item or just to see what's going on in there?

With an almost endless list of applications from drainage inspection to wiring conduits, motor vehicles to underwater fish tank photography, this mini endoscope is incredibly simple to use as it plugs directly into your Android device or PC to be ready to take video or stills and store them at a moment's notice.

The 7mm diameter camera head is equipped with its own adjustable lighting thanks to the 6 built in LED lamps and, being dust and waterproof (IP67 standard) can be used underwater or in dusty conditions.

IP67 standard rates this item as totally protected against dust and protected against the effect of immersion between 150 and 1000mm

The set is completed by the inclusion of a micro/standard USB adapter, spring and magnetic mounting clips.

To use the endoscope with your mobile phone or tablet you'll need to download the CameraFi application from the Google Play Store so that your Android device can recognise the remote camera.

Features:
• Simple to use
• Highly portable
• Compatible with Android and Windows
• Water/dust proof to IP67 standard
• Built in LED lighting
• 2m Cable supplied

Specs:
Cable length: 2m
Camera head dia: 7mm
Lighting: 6 LED light (with Brightness control)
Android resolution: 640 x 480
PC resolution: 1280 x 720
Frame rate: 30fps
Focal distance: 40mm ~ infinity
Viewing angle: 66°
Supported OS: Android/Windows 2000/XP/Vista/7

Package Included:
1 x USB Endoscope
1 x Spring clip
1 x Magnetic clip
1 x USB Connector adapter

Note:
Does not support IOS system.
Android Phone must support OTG function, and must support to connect external camera.

Supported phones:
Samsung Galaxy S3(i9300, i9308), S4(i9500, i9508), S5, S6, S6 Edge, S7, S7 Edge; Note2, Note3, Note4 Note 5, P600 Tablet, N5100 Tablet; SONY Z2 L50H; SONY LT26i, Z1, Z2, Z3, Z5, C3; Nexus 5; LG Gpro2, L24, Gpad 8.3; Moto Xpro, Nexus6, Moto E, MZ17; HTC 9088, Nexus 9, M7, M8, M9; HUAWEI G7, MATE8, P9.

A great wooden palette with flat natural bristle wooden handled artists paint brushes complete with plastic painting knives. In the set you get 1 palette, 3 flat bristle brushes plus you get 2 plastic painting knives

The Turnigy V2 Combo Tool has all your favorite drive tips stored in the one place. This 7-in-1 tool has all your favorite Spring Steel Metric Hex (1.5, 2.0, 2.5, 3.0mm), Flat Head (4.0mm) and Phillips Head (3.0, 4.5mm) tips easily stored in the caddy inside the superb Anodized Aluminum handle. Just select the tip you need and snap it in the drive socket and you’ll be fixing the problem in no time. The perfect way to keep all your favorite drive tips in one place.

The Turnigy V2 Combo Tool has all your favorite drive tips stored in the one place. This 7-in-1 tool has all your favorite Spring Steel Metric Hex (1.5, 2.0, 2.5mm) and Imperial (0.050", 0.063", 0.078" & 0.093") tips easily stored in the caddy inside the superb Anodized Aluminum handle. Just select the tip you need and snap it in the drive socket and you’ll be fixing the problem in no time. The perfect way to keep all your favorite drive tips in one place.