Landing Gear

Turnigy Scale Jet Alloy Wheel w/Rubber Tire (45mm) - Superbly made alloy wheel with a high quality, hard wearing scale rubber tire.

Specs:
Diameter: 45mm (tire diameter)
Width: 8mm (tire width)
Axle: 3mm
Weight: 17g

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

Turnigy Electric Magnetic Brake System - Replacement Controller

Spec Controller:
Operating Voltage: 12v~40v (3s~10s)
Output Voltage: 2A/0v~12v
Dimensions: 55mm x 7mm x 26mm
Weight: 15g

Ultra Light Rubber PU Scale Wheel 2.75"/70mm

Specs:
Width: 26.5mm
Weight: 13g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.00"/76.2mm 

Specs:
Width: 26.5mm
Weight: 18g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.5"/89mm

Specs:
Width: 31mm
Weight: 24g
Axle: 5mm

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 35mm
Axle diameter: 2mm
Weight: 2.4g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 40mm
Axle diameter: 2mm
Weight: 2.6g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 50mm
Axle diameter: 3mm
Weight: 4.7g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 55mm
Axle diameter: 3mm
Weight: 5g

Includes:
5 x wheels

Medium Sized Nylon Landing Gear Saddle Clamps (10pcs)

Specs:
Material: Nylon
Fits: 1.45mm (wire gauge)
Weight: 0.18g Per Set
Dimensions: 15 x 10mm 

This 2 piece carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for 70 Class F3A Models with a minimum width of 115mm, however the legs can be spaced apart to fit aircraft with a much wider fuselage.  

Alu Undercarriage (1pair/bag)

Size:255mm 
Weight: 108g / pair

Carbon Fiber Landing Gear 120mm (1 Pair)
Super Light Weight.
Very Strong
Height: 120mm (the height from the centre of the wheel to the base of the fuselage.)
Width as shown in image: 25mm
Length as shown in image: 140mm

CNC Rudder 2 Tray 4.0 inch (#4-40) Black

Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85g

COLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone image

This is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.

This tray features dual ball bearings for ultra-smooth and precise movement.

Servoless nose wheel retract with metal trunnion and steering arm.
33mm x 35mm Mount  90 Degree
Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

For matching main gear retracts see PRODUCT ID: HK-15090S-2

Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree - Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!

Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.

Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!

Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mm

Mount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mm

Not suitable for a plane heavier than 2kg
Strut & Landing gear not included

Carbon Fibre Tail Wheel Bracket - Up to 15cc Models

Specs.
Length: 76mm
Thickness: 2.2mm
Width: 11.2mm
Weight: 3.2g

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

Very well made and finished lightweight alloy straight oleo struts suitable for main undercarriages. These struts are sprung loaded which helps smooth out those slightly heavy arrivals.

68mm Alloy Wheel/Rubber Tyre - Split Alloy Wheel with Grooved, foam cored Rubber Tyre, suits 4mm Axle.

Weight: 41g