Landing Gear

Carbon Fiber Landing Gear 120mm (1 Pair)
Super Light Weight.
Very Strong
Height: 120mm (the height from the centre of the wheel to the base of the fuselage.)
Width as shown in image: 25mm
Length as shown in image: 140mm

Servoless nose wheel retract with metal trunnion and steering arm.
33mm x 35mm Mount  90 Degree
Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

For matching main gear retracts see PRODUCT ID: HK-15090S-2

Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree - Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.

Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)

Carbon Fibre Tail Wheel Bracket - Up to 15cc Models

Specs.
Length: 76mm
Thickness: 2.2mm
Width: 11.2mm
Weight: 3.2g

AVIOS BushMule Twin-Motor Sports/STOL Airplane 1500mm Optional Ski Set (3pcs).

Please note:  With small modifications, this ski set is suitable for other models such as the Durafly Slow Poke, etc.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

Very well made and finished lightweight alloy straight oleo struts suitable for main undercarriages. These struts are sprung loaded which helps smooth out those slightly heavy arrivals.

68mm Alloy Wheel/Rubber Tyre - Split Alloy Wheel with Grooved, foam cored Rubber Tyre, suits 4mm Axle.

Weight: 41g

Turnigy Scale Jet Alloy Wheel w/Rubber Tire (45mm) - Superbly made alloy wheel with a high quality, hard wearing scale rubber tire.

Specs:
Diameter: 45mm (tire diameter)
Width: 8mm (tire width)
Axle: 3mm
Weight: 17g

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

Turnigy Electric Magnetic Brake System - Replacement Controller

Spec Controller:
Operating Voltage: 12v~40v (3s~10s)
Output Voltage: 2A/0v~12v
Dimensions: 55mm x 7mm x 26mm
Weight: 15g

Ultra Light Rubber PU Scale Wheel 2.75"/70mm

Specs:
Width: 26.5mm
Weight: 13g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.00"/76.2mm 

Specs:
Width: 26.5mm
Weight: 18g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.5"/89mm

Specs:
Width: 31mm
Weight: 24g
Axle: 5mm

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 35mm
Axle diameter: 2mm
Weight: 2.4g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 40mm
Axle diameter: 2mm
Weight: 2.6g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 50mm
Axle diameter: 3mm
Weight: 4.7g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 55mm
Axle diameter: 3mm
Weight: 5g

Includes:
5 x wheels

Medium Sized Nylon Landing Gear Saddle Clamps (10pcs)

Specs:
Material: Nylon
Fits: 1.45mm (wire gauge)
Weight: 0.18g Per Set
Dimensions: 15 x 10mm 

A replacement pair of electric retract units for the Avios Spitfire Mk.1a 1450mm.

This 2 piece carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for 70 Class F3A Models with a minimum width of 115mm, however the legs can be spaced apart to fit aircraft with a much wider fuselage.  

These optional servoless electric retracts have been designed for the H-King Avro Lancaster and include scale looking wheels, they are suitable for versions 1, 2, and 3.

A complete set of replacement servoless retracts with dummy oleos and wheels for the AVIOS KingTwin 1700.

A replacement carbon landing gear for the H-King MX2 Extreme 30E.

A replacement servoless retract unit (1pc) for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A complete set of floats including a water rudder for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model. Take your flying to the next level and have loads of fun flying from your favorite lake or waterway. This set includes everything that is necessary to convert your Prime Tundra to a floatplane.

Features:
• The perfect addition for your Prime Tundra
• Made of tough EPO foam
• Includes a water rudder for improved steering whilst taxying
• Includes mounting hardware and decal set
• Very quick and easy to fit

Included:
1 x Pair of EPO floats
1 x Front mounting strut
1 x Rear mounting strut
2 x Cross braces
1 x Water rudder
1 x Decal set