$5 - $9.99

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

This is an all laser cut ply cockpit that has an integrated Pan and Tilt system and mounts for a complete FPV system. The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

Features:
• Lasercut pre-built construction
• Can be adapted to other planes
• 2 mounting positions for the Quick release pan and tilt
• Mounting provisions for a full FPV system

Specs:
Weight: 78g
Size: 98x96x221mm WxHxL
Fitment: Direct fit for the Hawkeye 1700 PC FPV plane (can be adapted to others)

Required:
2 x 9g servos, recommend 180deg and Metal Gear.

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

We all know the GoPro Hero as the take-it-anywhere workhorse of an action camera. Boldly going where no action cam has gone before; but how about giving your investment a little more protection from the dust and grime of everyday use?

The Turnigy TGY-iA6C is a new style in receivers. It builds on the reliability of the TGY-iA6B receiver but it is built specifically for using with PPM, i.BUS and S.BUS configurations. This is an excellent addition to your Turnigy TGY-i6s and TGY-i10 transmitters.

Dual antennas give the iA6C for unparalleled reception. Built-in connections allow you to use our optional telemetry sensors. 

An excellent receiver for multi-rotor drones as it cuts down on cabling and with built-in battery monitoring.

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• PPM, i.BUS, S.BUS
• Ultra-light weight design
• Dual antennas for most reliable interference free operation
• Connection ports for use with optional telemetry sensors
• Battery monitoring

Specs:
Channel: 8
Frequency: 2.4GHz ISM Frequency Range
Band width: 500KHz
Band quantity: 135
RF Power: <20dBM
System: AFHDS2A
Code type: GFSK
Output data: PPM, i.BUS, S.BUS
Antenna length: 26mm
Power: 4.0V~6.5V
Wireless Update: Yes
Channel data: Center position: 1500±30us; range: 1000~2000±30us
Channel delay: <15ms
Net Weight: 7.9g
Dimensions: 41x25x10mm
Range: >300 meters
Certification: CE0678, FCC ID: N4ZIA6C00, RCM

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

These excellent colored pencils come pre-sharpened and ready to use with 72 vibrant colors. These pencils work smoothly on paper and sharpen easily without the tips breaking off. They are slightly harder than the water color pencils and are best used for sketching and drawing.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

Ultra-Cure Tire Glue has a water-thin viscosity that wicks deep into the bead of the tire and cures in a matter of a few seconds. The tire bead must be tight fitting and should be held together while you apply the CA around the edges of the seam.

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT 

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

This Mini Vibrating Cleaning set is perfect for removing grease, dust, and other contaminants from small objects. Ideal for bearings, gears, springs, shafts, jewelry, watch parts, and even small precision instruments.

Furious FPV is very quickly earning a reputation for producing high quality FPV products. Their build quality is excellent and the Poker Chip Antenna is no exception. The Poker Chip patch antenna is small and light with a 10dBi gain and is a perfect match to the Furious FPV Achilles Diversity Receiver Module. So if you are looking for a new antenna for your FPV goggles then look no further than the Furious FPV Poker Chip. See the attached manual for the radiation pattern and the S-Parameters.

Engineered to be up to 10 times tougher than normal PLA, eSUN PLA+ has much higher interlayer bonding strength and is 100% FDA approved. The extra strength makes the filament perfect for hobby projects, including 3D printing spare parts and sculptural designs.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

Alu Undercarriage (1pair/bag)

Size:255mm 
Weight: 108g / pair