Servo Accessories

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 22AWG each wire
Length: 2mtr
Color: Red/Black/Yellow

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 5mtr
Color: Red/Black/White

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 2mtr
Color: Red/Black/Yellow

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 2mtr
Color: Red/Black/White

Flat 26AWG servo wire 2 mtr

RED/BLACK/WHITE

Make your own custom servo wires.
Combine this with our servo plugs to form your own custom sizes to perfectly fit your model and save weight.

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 26AWG each wire
Length: 5mtr
Color: Red/Black/White

The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.

Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.

This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!

Includes:
FrSky S.BUS to PWM Decoder

Specs:
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm

*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.

60mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.6g(Each)

120mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.8g(Each)

120mm JST-SH1.0 Servo extension (5pcs/bag)

Spec.
Weight: 0.7g(Each)

This handy little accessory will allow you to easily split a single receiver channel output into five. A handy accessory for those building multicopters as it gives you an easy way to program the throttle range into your ESC's all together prior to fitting them to your frame. It can also be used as a splitter in LED lighting systems.

Spec:
Lead length: 60mm
Weight: 3g

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the other leads turned on their side for signal only, makes for a clean and minimal vibration transfer installation. Or better yet a single CPPM/SBUS single lead. 

Specs:
Length: 130mm(black/red/white)
Connection: Male JR style plug on each end.

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the leads turned on their side for signal only makes for a clean and minimal vibration transfer installation, or better yet a single CPPM/SBUS single lead.

Specs:
Length: 80mm(black/red/white)
Connection: Male JR style plug on each end.

Micro Servo Connector Lead 1.25 Pitch - Female Plug (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Micro Servo Connector Lead 1.25 Pitch - Female Connector (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Strong, well crimped and finished.
High quality wire and terminals used.

Servo Lead Lock (5pcs/bag)

Size: L30×W12×H5mm

CNC Rudder 2 Tray 4.0 inch (#4-40) Black

Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85g

COLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone image

This is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.

This tray features dual ball bearings for ultra-smooth and precise movement.

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

Don't risk your servo extension connections again, use these servo connection keepers for a secure connection every time. 

In packs of ten, these keepers simply clip over the joined servo extension connection and ensures it can't be accidentally pulled apart.

Now you don't have an excuse for losing a model due to a poor or loose servo connection again, be smart and protect your model from an avoidable mishap by getting the cheapest insurance you can get with these reusable servo connection keepers.

Includes:
10  x Plastic Keepers

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.

Quality wire and connectors used on all Servo Lead Extensions. Comes with Female to Female connections. Ideal for connecting your receiver to the multirotor control board.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.