Landing Gear

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for large Extra 300 aircraft but it is also suitable for other large models with a fuselage width of 190mm.

Specs:
Fuselage Width: 190mm
Height: 255mm
Wheel Track: 560mm
Weight: 305g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for large Extra 300 aircraft but it is also suitable for other large models with a fuselage width of 230mm.

Specs:
Fuselage Width: 230mm
Height: 265mm
Wheel Track: 665mm
Weight: 350g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 22mm long x 18mm wide
Height: 110mm
Wheel Track from Center of Mounting Plate: 90mm (each)
Weight: 6g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 45mm long x 30mm wide
Height: 175mm
Wheel Track from Center of Mounting Plate: 105mm (each)
Weight: 20g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 55mm long x 25mm wide
Height: 190mm
Wheel Track from Center of Mounting Plate: 180mm (each)
Weight: 42g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 55mm long x 25mm wide
Height: 200mm
Wheel Track from Center of Mounting Plate: 165mm (each)
Weight: 31g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 60mm long x 40mm wide
Height: 235mm
Wheel Track from Center of Mounting Plate: 210mm (each)
Weight: 64g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 60mm long x 40mm wide
Height: 250mm
Wheel Track from Center of Mounting Plate: 235mm (each)
Weight: 80g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for small electric airplanes.

Specs:
Mounting Plate: 14mm long x 9.5mm wide
Height: 100mm
Wheel Track from Center of Mounting Plate: 75mm (each)
Weight: 2g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for small electric Extra 300 airplanes, it will also fit other similar size aircraft.

Specs:
Mounting Plate: 50mm long x 20mm wide
Height: 130mm
Wheel Track from Center of Mounting Plate: 100mm (each)
Weight: 9.6g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 125mm.

Specs:
Fuselage Width: 125mm
Height: 185mm
Wheel Track: 420mm
Weight: 90g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 110mm.

Specs:
Fuselage Width: 110mm
Height: 160mm
Wheel Track: 320mm
Weight: 53g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 170mm.

Specs:
Fuselage Width: 170mm
Height: 170mm
Wheel Track: 370mm
Weight: 79g

This 2 piece carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for fuselages with a minimum width of 170mm, however the legs can be spaced apart to fit aircraft with a much wider fuselage. 

Specs:
Fuselage Width: 170mm
Height: 280mm
Wheel Track: 580mm
Weight: 315g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 50cc sized models.

Specs:
Length: 96mm
Width: 13.2mm
Weight: 5.8g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 80cc sized models.

Specs:
Length: 118mm
Width: 14.2mm
Weight: 7.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. 

Suited for models up to .25 size Nitro/Electric planes.

Specs:
Length: 47mm
Width: 9mm
Mounting Hole Spacing: 18mm
Weight: 1.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 150cc sized models.

Specs:
Length: 174mm
Width: 14mm
Weight: 10.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 120cc sized models.

Specs:
Length: 170mm
Width: 12mm
Weight: 9g

This carbon fibre landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 100mm.

Specs:
Fuselage Width: 100mm
Height: 170mm
Wheel Track: 315mm
Weight: 52g

This lightweight Carbon Fiber Tail Wheel Bracket is good for planes up to 30cc or EP planes.

Specs:
Length: 90mm
Thickness: 2.8mm
Width: 12mm
Weight: 5.8g

Servoless Steerable Nose Retract for small models with 32mm x 25mm mount 90 Degree - Features Auto Cut Off and pre-installed 3mm Oleo Mounting Pin.
 

This servoless steerable nose retract features a metal trunion and a 44mm x 41mm mounting plate. It's designed for models weighing up to 5kg. It includes a pre-installed 5mm pin and steering assembly.

Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Screw Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 77g

Servoless Retract with metal trunion with 44mm x 41mm Mount (2pcs) 90 Degree - Features Auto Cut Off and pre-installed 5mm Oleo Mounting Pin.
 
Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Scew Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 72g each

Full Metal Servoless Retract for large models (10~12kg). Features all metal construction for precision, reliability and durability. This makes for an excellent, reliable alternative to air & mechanical operated retract systems on larger models!
 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 4.0inch 

The wheels has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.5inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.75 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 2.0inch