Bargain Bin

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

This is an all laser cut ply cockpit that has an integrated Pan and Tilt system and mounts for a complete FPV system. The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

Features:
• Lasercut pre-built construction
• Can be adapted to other planes
• 2 mounting positions for the Quick release pan and tilt
• Mounting provisions for a full FPV system

Specs:
Weight: 78g
Size: 98x96x221mm WxHxL
Fitment: Direct fit for the Hawkeye 1700 PC FPV plane (can be adapted to others)

Required:
2 x 9g servos, recommend 180deg and Metal Gear.

TF Model ESC and LED lighting power distribution board suitable for most quads and multi-rotors including SMACK TF250, OrcaTF280, TF650, TF680 and TF690.  A 3 position control channel can be setup to change the LED from Solid, Slow blinking and fast blinking LED lights.

Specs:
Dimensions: 50 x 50mm
Weight: 14g
ESC Output : 6
5V Output : 1
12V Output : 1
Mounting Holes : 45mm

Diff.Gear Housing (2pcs) - 118B, A2006, A2023T and A2035

Pins for Front Upright 2 pcs - 118B, A2006, A2023T and A2035

31mm Alloy Prop Nut/Spinner Suits 10mm Thread (Anodised Silver)

Height:30mm
Width:31mm
Thread Size:10mm
Thread Depth:25mm

31mm Alloy Prop Nut/Spinner Suites 8mm Thread (Anodised Black)

Height:30mm
Width:31mm
Thread Size:10mm
Thread Depth:25mm

Prop Nut/Spinner 22mm Alloy 10x1.0

Prop Nut/Spinner 22mm Alloy M10x1.25

Prop Nut/Spinner 22mm Alloy 3/8"-24

Prop Nut/Spinner 22mm Alloy M7x1.00 Anodised Black

Prop Nut/Spinner 22mm Alloy M10x1.00 Anodised Black

Prop Nut/Spinner 22mm Alloy 3/8"-24 Anodised Black

Prop Nut/Spinner 22mm Alloy M5x0.8 Anodised Red

Prop Nut/Spinner 22mm Alloy M7x1.00 Anodised Red

22mm Alloy Prop Nut/Spinner Suites 10mm Thread (Anodised Red)

Height:20mm
Width:22mm
Thread Size:10mm
Thread Depth:20mm

Hex spinner prop nut Alloy M7x1.0

Hex spinner prop nut Alloy M10x1.00

18mm Diameter Motor Mount - Clamp Style for Inrunner Motor

Spec.
Diameter: 18mm (Fits 130 Size Inrunner)
Length: 31mm
Weight: 8g

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

This is the carbon fiber main frame base plate for the HK-550GT helicopter.

Molex 2.0 2Pin Cable Female Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Female and Male Connectors (Plug and Crimp) (5sets)

Specs:
Connector: Molex 2.0 2pin Male and Female With Pins

JST-SH 3Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 3
Pin Spacing: 1mm
Socket Size: 5.5x4.5x3.1mm

JST-SH 5Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 5
Pin Spacing: 1mm
Socket Size: 7.5x4.5x3.1mm