Workbench

8 x 4.5 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Yellow)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 8ins
Pitch: 4.5ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Yellow
Weight: 3g each blade

9 x 4.7 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Green)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 9ins
Pitch: 4.7ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Green
Weight: 3.4g each blade

Brass Linkage Stopper For 1mm Pushrods.

Specs:
Material: Brass
Weight: 7.31g (Qty 10)

Brass Linkage Stopper For 1.2mm Pushrods.

Specs:
Material: Brass
Weight: 7.63g (Qty 10)

Brass Linkage Stopper For 2mm Pushrods.

Specs:
Material: Brass
Weight: 10.17g (Qty 10)

Brass Linkage Stopper For 3mm Pushrods.

Specs:
Material: Brass
Weight: 9.63g (Qty 10)

A lightweight, highly adaptable model aircraft stand, ideal for building, field assembly and storage of all but the largest of models (We've used these for models up to 2m long without any problems.)

The interlocking, all foam stand assembles in seconds, is flexible, strong and will not leave marks on your model.

Specs:
Length: 580mm
Width: 300mm
Height: 355mm
Weight: 530g

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Red
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Yellow
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Green
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Orange
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Spinner suits motors with a 3mm shaft.
Diameter is 40mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 21g

Spinner suits motors with a 5mm shaft.
Diameter is 45mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 33g

Spinner suits motors with a 5mm shaft.
Diameter is 56mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 63g

Turnigy 3D Gas wood propeller 22x10

Specs.
Prop Size: 22x10
Shaft Size: 10mm
Weight: 151g

*Suitable for both Electric & Gas powered engines.

Turnigy 3D Gas wood propeller 22x8

Specs.
Prop Size: 22x8
Shaft Size: 10mm
Weight: 139g

*Suitable for both Electric & Gas powered engines.

Turnigy 3D Gas wood propeller 23x10

Specs.
Prop Size: 23x8
Shaft Size: 10mm
Weight: 170g

*Suitable for both Electric & Gas powered engines.

Turnigy 3D Gas wood propeller 23x8

Specs.
Prop Size: 23x8
Shaft Size: 10mm
Weight: 156g

*Suitable for both Electric & Gas powered engines.

Slow Fly propeller.
These props come from China, however were almost certain they are made by the same mould that makes the GWS props.
Prop hub has the hex nut fitting to suit motors like the towerpro bell motors or small gearboxs with the threaded shaft.

A slow fly propeller is designed for smaller outrunner motors, typically the towerpro bell motors or slightly larger. They most suited to run on smaller planes at a lower RPM. Also great for gearbox reduced motors. A slowfly propeller typically has a spoon shaped blade.

Aerostar Composite Propeller 11x6 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed.

Aerostar Composite Propeller 12x6 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed.

Aerostar Composite Propeller 13x6 Grey (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed.

8x4 Slow Fly propeller.

Prop hub has the hex nut fitting to suit motors common to most bell motors or small gearboxes with the threaded shaft.

A slow fly propeller is designed for smaller outrunner motors, typically bell motors or slightly larger. They are suited to run on smaller planes at a lower RPM. Also great for gearbox reduced motors. A slowfly propeller typically has a spoon shaped blade.

A slow fly propeller is designed for smaller outrunner motors, typically the towerpro bell motors or slightly larger. They most suited to run on smaller planes at a lower RPM. Also great for gearbox reduced motors. A slowfly propeller typically has a spoon shaped blade.

A slow fly propeller is designed for smaller outrunner motors, typically the towerpro bell motors or slightly larger. They most suited to run on smaller planes at a lower RPM. Also great for gearbox reduced motors. A slowfly propeller typically has a spoon shaped blade.