Workbench

Durafly™ T-28 Trojan 1100mm V2 - 10x6 3-Blade Propeller

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 1.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These plastic props are perfect for your small free flight model project.  

Specs:
Material: Plastic
Color: Grey
Length: 7"
Weight: 4.1g

These plastic props are perfect for your small free flight model project.  

Specs:
Material: Plastic
Color: Grey
Length:8"
Weight: 5.1g

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 35mm
Axle diameter: 2mm
Weight: 2.4g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 40mm
Axle diameter: 2mm
Weight: 2.6g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 50mm
Axle diameter: 3mm
Weight: 4.7g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 55mm
Axle diameter: 3mm
Weight: 5g

Includes:
5 x wheels

These metal control horns are ideal for large scale models .  The pack includes two control horns and a nylon ball link with nut and bolt.

Specs:
Size: 37mm x 37mm
Weight: 4.7g (one control horn)

For heavy duty and scale applications you can't beat a pull/pull wire control system. Once adjusted correctly pull/pull systems are reliable and accurate and for scale aircraft like a Tiger Moth they certainly add scale realism as well as functionality.  

Pull/pull systems are also great for weight saving over conventional push rods and can be used for awkward and tight areas within fuselages.

Specs:
Wire diameter: 0.8mm
Wire Length: 2 x 1m lengths

Includes:
Wire
4 x pieces of heatshrink
4 x crimps
4 x threaded brass links

Don't risk your servo extension connections again, use these servo connection keepers for a secure connection every time. 

In packs of ten, these keepers simply clip over the joined servo extension connection and ensures it can't be accidentally pulled apart.

Now you don't have an excuse for losing a model due to a poor or loose servo connection again, be smart and protect your model from an avoidable mishap by getting the cheapest insurance you can get with these reusable servo connection keepers.

Includes:
10  x Plastic Keepers

These balance lead protectors are the smart way to reduce the risk of damaging your lipo's balance lead during charging.   Simply snap them over the base of the balance lead and you have yourself a much larger and safer grip location for connecting and especially disconnecting from the balance port of your charger. Also great for adding a bit of protection from prop-chop on FPV racing drones.

Specs:
Color: Yellow
Size:  Suits 6S Lipoly packs

Includes:
One balance lead protector

These Nylon clevis are suitable for push rods up to 1.5mm and offer a screw lock function for a secure fit.

The Clevis are supplied in packs of 10 and arrive complete with 1.75mm locking screws.

Specs:
Material: Nylon
Length: 15mm
Weight: 0.25g

Nylon Linkage Stopper 0.85 x 1.75 x 6mm (10pcs)

Specs:
Material: Nylon
Fits: 0.85mm Pushrods
Lock Screw: 1.75mm
Body length: 6mm
Weight: 0.11g

Nylon Aileron Control Arm 1.35 x 1.35mm

Specs:
Material: Nylon
Fits: 1.35mm screw threads / 1.35mm push rods
Weight: 0.20g

Medium Sized Nylon Landing Gear Saddle Clamps (10pcs)

Specs:
Material: Nylon
Fits: 1.45mm (wire gauge)
Weight: 0.18g Per Set
Dimensions: 15 x 10mm 

The Boom Stopper will help stop short circuits from blowing your electronics up. Simply plug in the Boom Stopper between the power source, usually your battery, and the components you are wanting to power for the first time. If there is a problem the inline 2A fuse will blow, instead of your components. When the fuse is blown the LED will light up indicating there is a short circuit and the Boom Stopper will reduce the current to a level that won't immediately damage your electronics, giving you time to remove the power supply. 

Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)

Lightweight aluminium spacers featuring a round cross section and a hex section (at each end) to fit a 5mm spanner. Ideal for use with helicopter and drone frames or similar applications where strong, accurate construction is required.

Specs:
Thread: M3
Length: 38mm
Weight: 1.5g each

The MultiStar Work Mat is a must have for any R/C hobbyist's work bench! Made from soft, grippy rubber and featuring ribbed compartments, it is perfect for containing small parts such as screws, nuts, washers and more. The backing is very grippy which will keep it from slipping on just about any surface. 

These smaller mats make excellent launch pads if you are taking off from uneven surfaces like grass or gravel.

The material is very soft and flexible allowing it to be easily rolled up for transport or storage. This makes it very easy to take with you to the race or field for on-site repairs. Never lose a screw again with the MultiStar Work Mat!

Features:
• Soft, grippy surface
• Ribbed compartments for containing small parts
• Flexible, can be rolled up for transport/storage

Specs:
Dimensions: 395 x 250mm

Kingduino Button Module V2.0

*Note: This is not an original Arduino brand product.