Workbench

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g.

UltraDetail Scale Cockpit - Viperjet 90.

Specs:
Width: 105mm
Length: 353mm
Heigth: 70mm

Losi Mini Plug Pigtail - Battery (2pcs/bag)

7cm wire with pre-tinned ends.

XR propellers are made from imported German Beechwood. Digitally machined (CNC) and hand finished. The XR range of propellers are well balanced and strong yet lightweight.
All XR's are primered and lacquered twice to ensure a long life and brilliant smooth gloss finish which helps to reduce friction and noise.

Features;
Very high strength/weight ratio.
Extended break-point grain alignment.
Unique 3D designed efficient curvature.
Low noise
Accurate balance.

Get the most out of your engine today, get an XR prop!

XR propellers are made from imported German Beechwood. Digitally machined (CNC) and hand finished. The XR range of propellers are well balanced and strong yet lightweight.
All XR's are primered and lacquered twice to ensure a long life and brilliant smooth gloss finish which helps to reduce friction and noise.

Features;
Very high strength/weight ratio.
Extended break-point grain alignment.
Unique 3D designed efficient curvature.
Low noise
Accurate balance.

Get the most out of your engine today, get an XR prop!

Excellent W.S. Deans T-connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

Hobbyking will begin to include the XT60 on all batteries up to 3,000mAh in capacity in the near future!

XT60, Designed by hexTronik to be more reliable and a better quality connection than Deans T-Connectors.

There is no patent on the XT60 connector, we hope this product is sold everywhere in the world and dominates the market, reducing customers dependency on the over-priced Deans T-connector.

Say 'No' to the Deans Connector profiteers, and use XT-60's!

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

Genuine Nylon high-temp XT60 connectors.
XT = heXTronik
60 = 60A constant
We're the guys that designed this plug!

Tired of wrestling with two pairs of pliers or using a vise to help you try and obtain that perfect Z-bend for your control rods, only to end up with a half formed S shaped bend with too much middle in it for a Z bend allowing your control surfaces to slop around? Sound like some of the Zs you have made?
These pliers will give you a perfect bend, every time. It will handle toughened wire up to 1/16 (1.6mm) diameter.
These are heavy duty pliers, not small hobby workshop tools.

Get your Z-bends easy and perfect every time with the Z-Bend Pliers!

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 8AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 26AWG each wire
Length: 5mtr
Color: Red/Black/White

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 2m
Color: Neon Yellow

Alloy Prop Saver & Adapter w/ Band
Weight: 2.5g

Please select below for your size;
Available: 2.3mm

Walkera Runner 250(R) Racing Quadcopter - Propellers (1CW/1CCW)

Runner 250(R)-Z-01

Screw Countersunk Phillips M2.5x12mm (10pcs/pack)

These spoilers are a dream come true for those looking for an easy to install and set-up spoiler system for larger scale gliders.

They are single sided scissor action spoilers just like the full scale versions.
These fit flush to the wings surface when closed and proportionally open to their fully deployed height.

The working 'blade' length is 255mm and stands 20mm above the wing skin fully deployed.

Features:
• Alloy Construction
• Scale Scissor action
• Plug and Play electronics
• Open and Close limit switches

Spec:
Voltage: 5-6v
Overall length: 300mm
Installation Depth: 10mm
Height Deployed: 20mm
Plug: JR Style
Weight: 40g each

Note: This is a kit consists of 1 x left and 1 X right spoiler.

Servoless Steerable Nose Retract for small models with 32mm x 25mm mount 90 Degree - Features Auto Cut Off and pre-installed 3mm Oleo Mounting Pin.
 

This servoless steerable nose retract features a metal trunion and a 44mm x 41mm mounting plate. It's designed for models weighing up to 5kg. It includes a pre-installed 5mm pin and steering assembly.

Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Screw Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 77g

Servoless Retract with metal trunion with 44mm x 41mm Mount (2pcs) 90 Degree - Features Auto Cut Off and pre-installed 5mm Oleo Mounting Pin.
 
Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Scew Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 72g each

Full Metal Servoless Retract for large models (10~12kg). Features all metal construction for precision, reliability and durability. This makes for an excellent, reliable alternative to air & mechanical operated retract systems on larger models!
 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 4.0inch 

The wheels has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.5inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.75 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 2.0inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 57mm (2.25inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 64mm (2.5inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 70mm (2.75inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

76mm (3.0inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 83mm (3.25inch) 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 95mm (3.75inch)

Ball and roller link.
Rod end diameter: 3.9mm
Link hole diameter: 2mm
Length: 16mm

This is a great way to avoid power shorts.
Rated to around 120A

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!
 
Easier to solder and a stronger connection than Deans T-plugs

A quick and easy way to eliminate a built in BEC without the need to cut or modify your ESC wires.

Futaba 6pin Trainer Port Plug to JR Male Servo plug (1pcs/bag)