Workbench

A quick and easy way to eliminate a built in BEC without the need to cut or modify your ESC wires.

Futaba 6pin Trainer Port Plug to JR Male Servo plug (1pcs/bag)

This handy connector set will be appreciated by anyone who is dealing with 'Header Pins' on Multirotor boards or any othe type of PCB.

This set consists of a 1 pin housing and 1 female terminal.

30mm JR Male/Male 26AWG Servo Lead.

Specs:
Connectors: 2 x male JR type
Length: 30mm
Wire Gauge: 26AWG
Wire Insulation: PVC
Weight: 2g each
Quantity: 10pcs

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.

JR 200mm Male/Male 26AWG Servo Lead.

Specs:
Connectors: 2 x male JR type
Length: 200mm
Wire Gauge: 26AWG
Wire Insulation: PVC
Weight: 3g each
Quantity: 10pcs

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 22AWG each wire
Length: 2mtr
Color: Red/Black/Yellow

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 5mtr
Color: Red/Black/White

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 2mtr
Color: Red/Black/Yellow

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 2mtr
Color: Red/Black/White

Flat 26AWG servo wire 2 mtr

RED/BLACK/WHITE

Make your own custom servo wires.
Combine this with our servo plugs to form your own custom sizes to perfectly fit your model and save weight.

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 26AWG each wire
Length: 5mtr
Color: Red/Black/White

60mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.6g(Each)

120mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.8g(Each)

120mm JST-SH1.0 Servo extension (5pcs/bag)

Spec.
Weight: 0.7g(Each)

This handy little accessory will allow you to easily split a single receiver channel output into five. A handy accessory for those building multicopters as it gives you an easy way to program the throttle range into your ESC's all together prior to fitting them to your frame. It can also be used as a splitter in LED lighting systems.

Spec:
Lead length: 60mm
Weight: 3g

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the other leads turned on their side for signal only, makes for a clean and minimal vibration transfer installation. Or better yet a single CPPM/SBUS single lead. 

Specs:
Length: 130mm(black/red/white)
Connection: Male JR style plug on each end.

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the leads turned on their side for signal only makes for a clean and minimal vibration transfer installation, or better yet a single CPPM/SBUS single lead.

Specs:
Length: 80mm(black/red/white)
Connection: Male JR style plug on each end.

Micro Servo Connector Lead 1.25 Pitch - Female Plug (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Micro Servo Connector Lead 1.25 Pitch - Female Connector (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Strong, well crimped and finished.
High quality wire and terminals used.

Servo Lead Lock (5pcs/bag)

Size: L30×W12×H5mm

Don't risk your servo extension connections again, use these servo connection keepers for a secure connection every time. 

In packs of ten, these keepers simply clip over the joined servo extension connection and ensures it can't be accidentally pulled apart.

Now you don't have an excuse for losing a model due to a poor or loose servo connection again, be smart and protect your model from an avoidable mishap by getting the cheapest insurance you can get with these reusable servo connection keepers.

Includes:
10  x Plastic Keepers

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.

Quality wire and connectors used on all Servo Lead Extensions. Comes with Female to Female connections. Ideal for connecting your receiver to the multirotor control board.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.