This Bluetooth module makes the programming of your Aerostar RVS G2 HV electronic speed controller extremely easy, simply download the Aerostar App to your Android smartphone or smart device and you are ready to connect and set up your ESC (see under the "Files" tab for the link to the App).

Programmable settings using the Bluetooth module:
• Brake Type: Off/Soft/Mid/Hard
• Motor Timing: Auto/High/Mid/Low
• Motor Rotation: CW/CCW
• HEF (High Efficiency Function: On/Off
• Cell Count (HV Version): Auto/6S/8S/10S/12S/14S
• LVC (Low Voltage Cut-Off/HV): Off/2.3V/2.5V/3V/3.2V/3.2V/3.4V/3.6V
• Voltage Cut-Off Type: Reduce Power/Cut-Off Power
• Start-Up Power: Low/Med/Hard
• Restore Factory Defaults

The G2 HV factory defaults are shown in "Bold".

Please note: This Bluetooth module is only compatible with the Aerostar RVS G2 HV ESC range. It is incompatible with the non-HV series of G2 ESCs, earlier versions of the Aerostar RVS HV ESC, or the ZTW brand of ESC..

This compact and user-friendly LCD program box will allow you to very easily change the parameters of your Turnigy TrackStar brushless car electronic speed controllers. The actual parameters that can be adjusted are dependent on the model of TrackStar brushless car ESC connected. This multifunction unit also has a handy built-in battery checker suitable for up to 8S LiPo batteries.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The AeroStar WiFi Connect offers an easier way to program an AeroStar WiFi electronic speed controller (ESC). This controller connects to your ESC via your Android phone or iOS device using WIFI to make it simple to configure and monitor your ESC.

For Android users you need to use this link and download the Android APK: https://drive.google.com/file/d/1Tkev-d0ggqEVN9QZy86MJ4tL8nVJDWdv/view

For iOS users you will need to download it via the Apple Store, APP name: Flycolor Configurator

HobbyKing Boat ESC Programming Card

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

HobbyKing ESC Programming Card

Suits The following HobbyKing ESCs

Hobby King 120A ESC 4A UBEC
Hobby King 80A ESC 4A SBEC
Hobby King 60A ESC 4A UBEC
Hobby King 40A ESC 4A UBEC
Hobby King 30A ESC 3A UBEC
Hobby King 20A ESC 3A UBEC

See related items below.

This is the programming card for the YEP ESCs. This card will allow you to conveniently program your ESC settings at home or at the field. Its compact size allows it to be stored in your field box or pocket with ease.

This is the USB link for programming your HobbyKing X-Car 120A & 60A brushless sensored/sensorless ESC. It will allow you to adjust all of the programming options quickly and easily via your PC.

Learn More

TURNIGY Programming Card

For use with Turnigy Plush ESCs (exc Plush-32)

This device plugs inbetween the Rx and the speed controller. It allows the user to program the BESC according to a series of LED indicators.
it has buttons at the bottom so you can navigate through the menu and select the feature you want, then change it. Its very simple and is much easier than listening to jingles or a series of beeps.

This item is an excellent addition to your flight kit, especially with the new hard plastic case and lets you quickly change the BESCs settings in the field in a much shorter time and with greater assurance that what you have changed is correct and saved into the BESC.

No more black magic throttle stick programming!
Throw away the manual, you wont need it anymore!

Compatible with Turnigy Plush speed controllers but NOT the Plush-32 ESC's.

Turnigy TY-P1 25Amp Brushless ESC Programming Card

Programming Options:
Brake (OFF/ON).
Cut-off Type (Soft-cut/Cut-off).
Cut-off Voltage (Low / Middle / High ).
Start Mode (Normal / Soft / Very Soft ).
Timing Mode (Low / Middle / High).
Cell (Auto, 2S, 3s, 4S).

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.

This user-friendly multifunction program box with an LCD interface makes programming HobbyWing brushless ESC's very quick and easy. For programming it can be used in 2 ways, first, it can be used on its own to set up an ESC by using the LCD interface. Secondly, it can be used as a USB adapter to link the ESC to a PC to allow for programming via a PC and to update the ESC firmware. It also has another function where it can be used as a voltmeter to measure the voltage of LiPo, Li-Ion, and Li-Fe battery packs. When a pack is connected it shows the complete pack voltage and also each individual cell, it is suitable for 2~8S battery packs.

This Aerostar programming card is designed specifically for the RVS G2 series of electronic speed controllers. Please note that it is not compatible with earlier versions of the Aerostar RVS speed controllers.

USBasp AVR Programming Device for ATMEL Processors

Includes:
1 x USBasp Device
1 x Cable

Suits the HobbyKing Quadcopter Control Board.