Vehicles

The ZD Racing 1/10th scale Thunder ZMT-10 4WD brushless monster truck is sure to give you a lot of fun bashing about on all sorts of terrain. It looks great with its striking bodyshell, and the big wheels and tires give it a real presence on the track. This truck is packed full of the features you would come to expect in a much more expensive vehicle. Being RTR (Ready-To-Run), it is supplied with a powerful T3650-3300KV brushless motor, 45A ESC, a 3.5kg high-torque servo for the steering, and a 2.4GHz transmitter and receiver. All you will require is a 2S (7.4V) 2400mAh hardcase LiPo battery pack.

The ZD Racing 1/10th scale Pirates 3 TC-10 4WD brushless touring car is sure to turn heads when it is racing around local car parks or at your local race track. It looks great with its stylish bodyshell and stylish aluminium wheels, and the rubber tires will give fantastic grip on the track. This car is packed full of the features you would come to expect in a much more expensive vehicle. Being RTR (Ready-To-Run), it is supplied with a powerful T3650-3300KV brushless motor, 45A ESC, a 3.5kg high-torque servo for the steering, and a 2.4GHz transmitter and receiver. All you will require is a 2S (7.4V) 2400mAh hardcase LiPo battery pack.

The ZD Racing 1/8th scale Pirates 2 B-8 4WD brushless racing buggy is sure to ignite your passion for off-road racing. This buggy is packed full of the features you would come to expect in a much more expensive vehicle. It is supplied almost ready to run with a powerful T3660-2150KV brushless motor, splash-proof 80A ESC with cooling fan, and a 9kg high-torque servo for the steering. It is no slouch in the speed department either, it has breathtaking acceleration, and speeds of up to 80km/h are possible. The handling is awesome due to its low center of gravity, it is precise and predictable, making it perfect for just bashing or competing on the off-road race circuit.

The ZD Racing 1/8th scale Rocket SC08 4WD brushless short course truck is sure to ignite your passion for roaring across all terrain. It looks great as well with its stunning, colorful bodyshell and scale details. This truck is packed full of the features you would come to expect in a much more expensive vehicle. Being RTR (Ready-To-Run) it is supplied with a powerful T3660-2400KV brushless motor, 80A splashproof ESC, a 9kg high-torque servo for the steering, and a 2.4GHz transmitter and receiver. All you will require is a 3S (11.1V) 3000mAh hardcase LiPo battery pack.

The features include metal adjustable oil-filled shocks, high-speed bearings throughout, and all-terrain short-course truck tires with a diameter of 112mm and a width of 48mm. Other features include precision CNC-machined steering cups, rear axle seats, metal drive shafts and gears, and an aluminium CNC-machined chassis.

The ZD Racing 1/16th scale Rocket Desert Truck is an advanced desert racer that loves racing across the dunes, dirt tracks, and other demanding surfaces. This all-terrain vehicle is based on the world-renowned Ultra 4 extreme off-road racing prototype. It looks great with its stylish, practical clamshell design bodyshell for easy access. The scale details include simulated LED roof spotlights, a roll cage, a driver, and a co-driver.

The Rocket is packed full of the features you have come to expect from ZD Racing and is only usually seen in a much more expensive vehicle. It is supplied ready to run with a pistol-grip transmitter, receiver, 380 brushed motor, splash-proof 30A ESC with BEC, and a 2.2kg torque metal-geared servo for the steering. It is no slouch in the speed department either, it has excellent acceleration, and speeds of up to 45km/h are possible. The large all-terrain desert off-road tires and its low center of gravity make it an awesome, and predictable handling truck to drive on either soft or hard types of terrain.

The ZD Racing 1/16th scale Rocket Desert Truck is an advanced desert racer that loves racing across the dunes, dirt tracks, and other demanding surfaces. This all-terrain vehicle is based on the world-renowned Ultra 4 extreme off-road racing prototype. It looks great with its stylish, practical clamshell design bodyshell for easy access. The scale details include simulated LED roof spotlights, a roll cage, a driver, and a co-driver.

The Rocket is packed full of the features you have come to expect from ZD Racing and is only usually seen in a much more expensive vehicle. It is supplied ready to run with a pistol-grip transmitter, receiver, 380 brushed motor, splash-proof 30A ESC with BEC, and a 2.2kg torque metal-geared servo for the steering. It is no slouch in the speed department either, it has excellent acceleration, and speeds of up to 45km/h are possible. The large all-terrain desert off-road tires and its low center of gravity make it an awesome, and predictable handling truck to drive on either soft or hard types of terrain.

The ZD Racing 1/12th scale BX12 is an advanced off-road racing buggy that loves racing across the dunes, dirt tracks, and any other demanding racing surfaces. It is packed full of features and looks great with its stylish bodyshell and large wing. It is supplied ready to run with a pistol-grip transmitter, receiver, 2845-3600KV brushless motor, splash-proof 35A ESC with BEC, and a 2.2kg torque metal-geared servo for the steering.

The outstanding features of the BX12 include the following: smooth power transfer, anti-sway bars, lightweight T6061 aluminium alloy chassis, 3mm T6061 aluminium alloy shock towers, and large bore adjustable oil-filled metal shock absorbers. Other features include an adjustable CNC-machined motor mount, powder-coated metal differential gears, lightweight nylon swing arms, and wide, all-terrain wheels and tires

The ZD Racing 1/12th scale BX12 is an advanced off-road racing buggy that loves racing across the dunes, dirt tracks, and any other demanding racing surfaces. It is packed full of features and looks great with its stylish bodyshell and large wing. It is supplied ready to run with a pistol-grip transmitter, receiver, 2845-3600KV brushless motor, splash-proof 35A ESC with BEC, and a 2.2kg torque metal-geared servo for the steering.

The outstanding features of the BX12 include the following; smooth power transfer, anti-sway bars, lightweight T6061 aluminium alloy chassis, 3mm T6061 aluminium alloy shock towers, and large bore adjustable oil-filled metal shock absorbers. Other features include an adjustable CNC-machined motor mount, powder-coated metal differential gears, lightweight nylon swing arms, and wide, all-terrain wheels and tires

The ZD Racing 1/16th scale EX-16 4WD touring car is an advanced track racer that mirrors the thrills of real racing. Its innovative design boasts a replica body shell with LED lighting which makes you stand out from the crowd on the race track. The EX-16 is packed full of the features you have come to expect from ZD Racing and is only usually seen in a much more expensive vehicle. It is supplied ready to run with a pistol-grip transmitter, receiver, K2435-B Brushless Motor, 30A splashproof brushless ESC, and a 2.2kg torque metal-geared servo for the steering. It is no slouch in the speed department either, it has excellent acceleration, and speeds of up to 30km/h are possible. The handling is also awesome due to its low center of gravity, it is precise, and predictable making it the perfect partner for racing around your local race circuits.

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 26 x 16 x 8mm + 15mm pin length 
Material: Aluminum

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 23.5 x 13 x 8mm + 8mm pin length
Material: Plastic / Steel

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions:  26x16x10mm + 10mm pin Length
Material: Plastic / brass

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

*This item is only available as 1m lengths, if you wish to purchase longer continuous lengths use R12A1062-06

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Blue

HobbyKing® ™ X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 60A
Burst Current: 240A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-9 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 43 x 36 x 33mm
Weight: 84g
 
Includes:
60A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible programming card and USB adapter.

HobbyKing X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 80A
Burst Current: 450A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-10 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 44 x 34 x 31.5mm
Weight: 85g
 
Includes:
80A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible USB adapter.

Designed specifically to suit the 1/18 Brushless 4WD Stadium Truck. 

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.   

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells. 

You won’t find a better deal in Lipoly batteries anywhere! 

Spec.
Minimum Capacity: 1300mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 76g
Pack Size: 74 x 34 x 17mm
Charge Plug: JST-XH
Discharge plug: XT60 

Note: Suits the 1/18 Brushless 4WD Stadium Truck w/ 18Amp System