Vehicles

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 26 x 16 x 8mm + 15mm pin length 
Material: Aluminum

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 23.5 x 13 x 8mm + 8mm pin length
Material: Plastic / Steel

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions:  26x16x10mm + 10mm pin Length
Material: Plastic / brass

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

*This item is only available as 1m lengths, if you wish to purchase longer continuous lengths use R12A1062-06

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Black

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Blue

The perfect transport/storage option for your precious R/C transmitter!

The Turnigy Transmitter Bag features lightweight construction, yet is rigid enough to protect your radio during normal transport. It has dual zippers, a removable carrying strap and pockets inside to accommdate a wide variety of accessories such as spare TX battery, charger, neck strap and more!

Two self adhesive foam blocks are included on the inside for accommdating your specific transmitter shape. They feature a hook & loop backing so they can be moved to whichever position you need very quickly and easily. There is even a hook & loop strap integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g

HobbyKing® ™ X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 60A
Burst Current: 240A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-9 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 43 x 36 x 33mm
Weight: 84g
 
Includes:
60A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible programming card and USB adapter.

HobbyKing X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 80A
Burst Current: 450A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-10 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 44 x 34 x 31.5mm
Weight: 85g
 
Includes:
80A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible USB adapter.

Designed specifically to suit the 1/18 Brushless 4WD Stadium Truck. 

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.   

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells. 

You won’t find a better deal in Lipoly batteries anywhere! 

Spec.
Minimum Capacity: 1300mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 76g
Pack Size: 74 x 34 x 17mm
Charge Plug: JST-XH
Discharge plug: XT60 

Note: Suits the 1/18 Brushless 4WD Stadium Truck w/ 18Amp System 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

Sail Winch Servo 13kg / 0.7sec (360deg) / 55g

Spec.
Weight: 55g 
Dimensions: 40.5 x 20.2 x 38mm
Speed: 0.9sec / 360deg (4.8v) - 0.7sec / 360deg (6.0v)
Torque: 11kg.cm (4.8v) - 13kg.com (6.0v)
Operating voltage: 4.8 - 6.0V
Gear train: Metal
Spline Count: 25

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.  

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

You won’t find a better deal in Lipoly batteries anywhere!

Spec.
Minimum Capacity: 1600mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 81g
Pack Size: 89 x 30 x 16mm
Charge Plug: JST-XH
Discharge plug: Losi mini

*This pack has a Losi Mini discharge plug

A perfect replacement for the LOSB1212 7.2v 1100mAh NiMH pack 

The Turnigy 1600mah 2S1P Lipoly pack offers more punch and longer run times in your Losi Mini Short Course Truck. Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.  

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.

You won’t find a better deal in Lipoly batteries anywhere!

Spec.
Minimum Capacity: 1600mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 92g
Pack Size: 69 x 43 x 16mm
Charge Plug: JST-XH
Discharge plug: XT60

Note: A EC2 to XT-60 Adapter is available for this pack, see the related items below.  

Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford. 

Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells. 

You won’t find a better deal in Lipoly batteries anywhere! 

Spec.
Minimum Capacity: 1700mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 92g
Pack Size: 91 x 26.5 x 18mm
Charge Plug: JST-XH
Discharge plug: XT60 

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

This is the USB link for programming your HobbyKing X-Car 120A & 60A brushless sensored/sensorless ESC. It will allow you to adjust all of the programming options quickly and easily via your PC.

Learn More

46mm Universal Shaft Turnigy TD10 4WD Touring Car (2pc)

Specs:
Material: 7075 Aluminum
Length : 46mm

4mm Wheel Adaptor Turnigy TD10 4WD Touring Car (4pc)

Specs:
Material: Aluminum
Depth: 4mm

4mm Wheel Adaptor, machined from Aluminum Alloy, greatly enhances the hardness
and durability of the wheel mount system.

Front One Way Version 2 Turnigy TD10 4WD Touring Car (1 set)

Front Bulkhead Bearing Housing - 3Racing SAKURA FF 2014

Alu. Stabilizer Holder - 1/10 Hobbyking Mission-D 4WD

63mm TurnFin Set L&R - Suit HobbyKing Vanquish 1075MM BOAT

Spec.:
Height: 63mm
Width: 24.7mm
Weight: 32g

RJX X-TRON 500 6 x 12 x 4mm Bearing # X500-8003 (2pcs)

Screw Countersunk Phillips M2.5x12mm (10pcs/pack)

A 1/10 scale model of a typical Formula-1 tunnel hull racing boat that is a stunning design and made of high quality fiberglass, it is beautifully finished in high gloss gel-coat and has eyecatching graphics already applied.

This is a hull only so that you can customize your own motor, ESC,  battery and radio set up to make this one really fast boat.

Specs:
Length: 650mm
Width: 270mm
Height: 190mm
Weight: 730g (hull only)

Required:
540 size outboard motor unit
ESC to suit above unit
2~3S 3000mah to 4000mah lipoly battery
1 x standard size servo
1 set of steering linkages
2ch transmitter and receiver system

Exhaust Pipe Holder 1/16 Turnigy 4WD Nitro Racing Buggy (1pcs/Bag)
Part No.: 30812

Light Set (Complete) - A2033 (1pair)

Quanum Skull Crusher 2WD - Drive Shaft/CVJ

A2032 and A2033 33434 CVD

Clutch Gears 14T - A3015

Metal Rear Shock Shaft - A3015 (2pcs)