Vehicles

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1700kv
Poles: 4
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

The HobbyKing® ™ GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries!

Features:
• Reliable, interference free 2.4GHz AFHDS signal operation
• 3CH operation
• Rechargeable li-ion transmitter battery
• Interchangeable rubber hand grips
• Adjustable steering dual-rate
• Servo reversing

Transmitter Specs:
Model: Car/Boat
RF Power: 20dBm (100mW) max
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
Low Voltage Warning: Yes
Charge Port: Yes (USB- charge cable included)
Power: 3.7V 800mAh li-ion (included)
Weight: 270g

Receiver Specs:
Model: Car/Boat
RF Receiver Sensitivity: -105dBm
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
Failsafe: Yes
Power Port: Yes (VCC)
Power: 4.5~6.5 VDC 
Weight: 5g
Antenna Length: 26mm
Dimensions: 37.6 x 22.3 x 13mm

Includes:
HK-GT2B transmitter
HK-GT2B 3CH receiver
3.7V li-ion rechargeable battery pack
Optional second rubber hand grip
Antenna tube
USB charge cable
Bind plug
User manual

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Orange 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger (UK style plug)
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours 
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Green 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger 
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters. 

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Turnigy batteries are known the world over for performance and price, so it’s no surprise to us that they're the go-to pack for those in the know.

Turnigy Hardcase batteries stand up to the stress and shock associated with the punishing extremes of on or off-road racing. No matter the type of driving you prefer, Turnigy  Hardcase packs are an ideal choice.

Turnigy Hardcase Lipoly packs utilize IR matched cells, deliver the rated capacity and perform when you punch the throttle. You simply won’t find a better value Hardcase pack anywhere!

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

1:18 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this incredible, officially licensed classic 4WD Toyota FJ Cruiser. FMS is one of the most experienced RC manufacturers on the market today, and this replica's attention to detail is second to none. The full-size retro-style FJ Cruiser SUV concept arrived in the early 2000s, the designers wanted to resurrect the popular traits of the iconic FJ40. The FMS 1:18 scale replica perfectly captures the essence of the full-scale Toyota FJ Cruiser design. The accurate details include the classic yellow and white paint scheme, the scale roof luggage rack, snorkel, footrests, heavy-duty front bumper, and spare tire. The realism continues into the interior with the detailed center console, rearview mirror, and authentic-looking seats.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this meticulously designed small, but mighty FCX24 Power Wagon. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. The full-size Power Wagon originally started production in 1945, the FMS version depicts the type that became available in around 1949. This model perfectly captures the essence of the full-scale Power Wagon design, which appeared as a mud off-road truck. Its realism is beyond expectations with the accurate details including, non-slip footplates, snorkel, windscreen wipers, and spare (useable) wheel and tire.

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this Chevrolet officially authorized FCX24 K5 Blazer. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. Chevrolet's first-generation K5 Blazer appeared in 1969 and was the most compact SUV on the market at the time. It was designed as a sport utility vehicle with excellent off-road ability and opened up the joy of adventure and the great outdoors to many, many people. This FMS model perfectly captures the essence of the full-scale K5 Blazer design, its realism is beyond expectations with accurate details including a detachable rear cargo bed hardtop, large diameter wheels, rearview mirrors, roll-bar w/lights (for when the hardtop is removed), and special electroplated parts including the wheels to add amazing realism.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 4.5
KV: 7800KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 490
Resistance: 0.0029 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 5.5
KV: 6300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~7.4V (1~2S)
Max Current: 108A
Max Watts: 430
Resistance: 0.0041 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 8.5
KV: 4350KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 3.7~11.1V (1~3S)
Max Current: 80A
Max Watts: 340
Resistance: 0.0098 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 165g

Specs:
Type: Turnigy TrackStar Modified 540 Sensored Brushless Motor
Scale: 1/10th (modified class)
Poles: 2
Turns: 10.5
KV: 4300KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 63A
Max Watts: 250
Resistance: 0.0151 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 160g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 13.5
KV: 3600KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 48A
Max Watts: 190
Resistance: 0.0219 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 158g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 17.5
KV: 2850KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 34A
Max Watts: 130
Resistance: 0.0368 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 157g

Specs:
Type: Turnigy TrackStar Stock 540 Sensored Brushless Motor
Scale: 1/10th (stock class)
Poles: 2
Turns: 21.5
KV: 2350KV
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~11.1V (2~3S)
Max Current: 28A
Max Watts: 100
Resistance: 0.0558 ODM
Motor Diameter: 35.8mm
Motor Length: 52mm
Shaft Diameter: 3.175mm
Shaft Length: 13.9mm
Mounting Screw Threads: 6 x M3
Mounting Screw Centers: 25.2mm
Weight: 157g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-2000KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 2000KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Max Voltage: 14.8V (4S)
Max Current: 97A
Resistance: 0.0099 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-2800KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 2800KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Max Voltage: 14.8V (4S)
Max Current: 130A
Resistance: 0.0056 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g