Description

The XFly 1500mm (59.1'') Tasman is a STOL-capable, high-wing airplane featuring sporty flight and aerobatic 3D performance. The Tasman's impressive flight characteristics and large air-filled shock-absorbing tires make short takeoffs and aggressive landings on any type of surface easy. The 4S-compatible brushless motor, 40A ESC, 2-blade propeller and a 4S Lipo battery proved to be the optimum setup for power and duration, allowing the plane to hover, roll, loop and fly inverted easily, which makes it highly recommended as an advanced trainer.

Factory-installed LED navigation lights, plus operational flaps, are functional scale features that take your experience to another level. The Tasman comes equipped with a latch-type top hatch to fit 4S 2200-3300mah batteries for a wide range in performance and flight times.

If you are looking for an advanced trainer with STOL capabilities, sport performance and simple aerobatic 3D capabilities, look no further than the XFly Tasman!

Features

• Lightweight yet durable composite-reinforced EPO
• Larger wing and functional flaps delivering short takeoff and landings (STOL) plus 3D capabilities
• Unique oversized pair of air-filled tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
• Realistic-looking LED navigation lights
• Latch-type top hatch to fit 4S 2200-3300mAh batteries for a wide range in performance and flight times

Technical Specifications

• Wingspan:?1500mm / 59in
• Length:?1150mm / 45in
• Wing load:?50g/dm2
• Wing Area:?36dm2
• Flying weight: around?1800g
• Motor:?3536-KV900
• ESC:?40A
• Servo: 9g digital servos x 6
• CG: 60mm from the leading edge
• Recommended battery: 4S 2200-3300mah
• Landing gear:?Fixed main landing gear, steerable rear gear
• Ailerons:?Yes
• Elevator:?Yes
• Rudder:?Yes
• LED: Yes
• Flaps:?Yes
• Recommended Radio: 5 channel
• Recommended environment:?Outdoor
• Flying time: Approx. 6-10 minutes
• Mounting duration: around 20?minutes

Content

• XFly Tasman 1500mm PNP?(Bush/Trainer)
• Propeller:?2 blade
• Motor:?1x Brushless Outrunner?3536-KV900
• ECS:?40A
• Servos:?9g digital servos x 6

Required

• 5-Channel radio transmitter
• 5-Channel receiver
• 4S 2200-3300mah Battery
• 4S Battery charger

Description

Derived from XFly Swift 2100 glider, X2100 is a FPV carrier aircraft designed by XFly Model team specially for FPV hobbyists. The X2100 adopts a glider layout design with a high aspect ratio, which has natural advantages in flight time and flight stability. Twin power systems allow it to easily achieve 1:1 thrust-to-weight ratio, and the large wingspan design of the aircraft provides ample space for future payload additions. Capacious battery compartment allows for common 4s Lipo batteries or 21700 batteries for optimised flight times.

All components of the X2100 can be assembled without glue and fixed with screws, featuring a safe and reliable design. A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself. Twin powers distributed on each side, plus the reasonable match of axle distance and propeller, free you from the risk of propeller damage while landing.

Features

• The layout design of the glider has natural advantages in flight time and flight stability.
• Twin power systems and the large wingspan design providing ample space for future payload additions.
• Capacious battery compartment allowing for common 4S LiPo batteries or 21700 batteries for optimised flight times.
• All components can be assembled without glue and fixed with screws, featuring a safe and reliable design.
• A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself.
  
  

Technical Specifications

• Wingspan: 2100mm/82.7''
• Overall Length: 1050mm/41.3''
• Flying Weight: 1500g
• Motor Size: 2212-KV1400 *2
• ESC: 40A *2
• Servo: 9g servo*6
• Channels: 5CH- aileron, elevator, throttle, rudder, flap
• CG: 50mm from the leading edge
• Wing Load: 38.5g/dm2
• Wing Area: 35dm2
• Recommended Battery: 4S 2600-3300mAh, 21700-4S1P-5000mAh, (21700-4S2P-10000mAh)
• Approx Flying Duration: 10-30 mins
• Assembly Time: 15 mins
• Skill Level: Beginner
• Age Level: 14 years +
• Flap: Yes
• Retract: No
• Prop Size: 8x5'' *2

Content

• XFly Tasman 1500mm PNP?(Bush/Trainer)
• Propeller: 2 blade
• Motor: 1x Brushless Outrunner?3536-KV900
• ECS: 40A
• Servos: 9g digital servos x 6

Required

• 5 channel transmitter and receiver (not included)
• 3S/4S Li-Po battery balance charger (not included)
• Recommded 3S/4S 2200~3300mAh Li-Po battery (not included)