Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

Phantom FPV Flying Wing 1550mm - Replacement Vertical Stabilizer (1pair)

Phantom FPV Flying Wing 1550mm - Replacement Main Wing (1pair)

*Note* For V2 version only. V2 has removeable wing panels.

Keep your Telemetry Radios safe! These cases are made out of slightly translucent ABS plastic, so you still can see TX/RX LEDs. They have a very tight fit and finish and are clearly labeled. These cases will make your setup look like Pro gear, while keeping them safe!

Designed to fit FPV Radio Telemetry Kit - 915Mhz/433MHz(#42846/42847,not included), But fits other brand Telemetry Radios as well.

Includes:
3M Foam Double-tape X1
Ground module Case X1
Air module Case X1

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

Telemicro 520mm - Replacement Spinner

Suit HobbyKing Bixler 2

Spec.
Length: 41mm / 18mm(Horn Only)
Clip Size: 12 x 9.5mm

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

XFLY J-65 Twin 40mm EDF WHITE PNP RC plane

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

Features:
• EPP material, good toughness and more resistance to falling and explosion.
• With flight control, can fly in a strong wind of level 5.
• Simple assembly, convenient disassenbly.
• Compatible with Futaba receivers (5V for S-BUS, 3V for DSM).
• With low signal and voltage alarm,timely remind the return.
• Strong power motor,quick response and fast locking.
• Support two takeoff methods: ground takeoff and hand throw takeoff.
• With self-stabilization system, you can get start quickly.
• 6 channel glider remote controlled aircraft (rise, descent, left turn, right turn, forward roll, 3D crane flight)
• Support one-key 3D stunts - With 6-Axis gyroscope, automatically balance, suitable for beginners.

Specs:
Item Name: QIDI-550
Material: EPP
Wingspan: 505mm
Fuselage Length: 620mm
Motor: 2004 KV2800 brushless motor
Servo: 4.3g digital *3pcs
ESC: 12A brushless
Propeller: 6x3cm 2-blade
Battery: 7.4V 500mAh
Vertical Flight Time: 20mins
Normal Flight Time: 20mins
Charging Time: 20mins
Remote Control: 2.4G 6CH Mode 2
Control Range: About 400m
Takeoff Weight: 140g
Product Size: 50x62x10cm
Package Size: 54.6x11.8x19.3cm
Assembly: Required

Included:
1 x QIDI 550 (RTF) SWIFT-ONE Sky Challenger EPP 6CH Profile 3D Aerobatic Plane w/6-Axis Gyro Stabilization System (505mm)
1 x 6ch 2.4GHz transmitter
1 x 7.4V 500mAh LiPo battery
1 x Spare propeller
1 x Screwdriver
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

Specifications

Wingspan: 400mm
Control Range: Up to 150 meters
Flight Time: Up to 20 minutes per battery
Battery Options: 1, 2, or 3 LiPo batteries
Controller Mode: Mode 2 (Throttle Left)
Material: EPP Foam
Recommended Age: 14+

Package Includes:

1 x RC Airplane
1 x Remote Controller (4AA Batteries Required, Not Included)
3 x Pairs of Propellers (1 Two-Blade & 2 Four-Blade)
1 x USB Charging Cable
1 x English Instruction Manual

Specification:
Item: Mini F4U V2
Version: RTF
Length: 12.5 inches
Wingspan: 15.7 inches
Flying weight: 0.1lbs
Material: EPP
Motor: 10mm coreless motor 
Speed control: None
Servo: 1.3g servo*2 (3-CH)
Battery: 3.7v 400mah Li-po
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners
Where to play: Outdoor
Is Assembly required: No
Flight time: 14mins
Flaps: No

Specs:
Product Name: Volantex Mini T-28 Trojan
Version: RTF 
Material: EPP
Wingspan: 400 mm (15.75 inches)
Length: 317 mm (12.48 inches)
Motor: 10mm coreless motor
Receiver: 2 in 1 integrated board
Servo: 2g plastic gear *3
Propeller: 130X70mm
Remote control: 2.4GHz 4CH
Flying weight: 60g
Recommended battery: 3.7V-360MAH
Package size (length x width x height): 35X35*15.5cm
Flight time: 14mins
Charging time: 2.5 hours

Included:
1 x Volantex (RTF) Mini T-28 Trojan EPP 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane Trainer
1 x 4ch 2.4GHz transmitter
1 x 3.7V 400mAh LiPo battery
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

Features:
• Channels: 3-Channel Control
• Assembly: Fully Assembled and Ready to Fly (RTF)
• Recommended Age: Suitable for Beginners and Kids
• Power System: Double Power Motor Configuration

Specs:
Model: P51D 3CH RTF
Material: EPP (Expanded Polypropylene)
Dimensions: 336mm (Length) x 260mm (Wingspan) x 97mm (Height)
Weight: 50g
Motor: 7mm Coreless Motor
ESC/Receiver: Integrated 3-Channel
Battery: 3.7V 400mAh Lithium Polymer (LiPo)
Flight Time: Approximately 14 minutes
Control System: 2.4GHz Remote Control
Control Distance: Up to 120 meters
Gyro System: Built-in Gyroscope for Enhanced Stability

Included:
1 x Volantex RC P51D 3CH RTF Airplane
1 x 2.4GHz Transmitter
1 x 3.7V 400mAh LiPo Battery
1 x USB Charging Cable
1 x User Manual

Required:
4 x AA batteries for transmitter

Features:
• Channels: 3-Channel Control
• Assembly: Fully Assembled and Ready to Fly (RTF)
• Recommended Age: Suitable for Beginners and Kids
• Power System: Double Power Motor Configuration

Specs:
Version: RTF
Length: 12.5 inches
Wingspan: 15.7 inches
Material: EPP
Motor: 10mm coreless motor
Servo: 1.3g servo*2 (3-CH)
Battery: 3.7v 400mah Li-po
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners
Flight time: 14mins
Flaps: No

Included:
1 x 400mm Wingspan Airplane
1 x Remote control
1 x Batteries
2 x Propeller
1 x USB Charger
1 x Package

Required:
4 x AA batteries for transmitter

Features:
• Channels: 4-Channel Control
• Assembly: Fully Assembled and Ready to Fly (RTF)
• Recommended Age: Suitable for Beginners and Kids

Specs:
Version: RTF
Length: 500 mm
Wingspan: 317 mm
Material: EPP
Motor:1806 Brushless Motor
Servo: 4CH
Battery: 7.4V 400mAh
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners

Included:
1 x Aircraft Body
1 x 4CH-Remote Control
1 x Batteries
2 x Propeller
1 x Product Manual
1 x Landing gear

Required:
4 x AA batteries for transmitter

Features:
• Channels: 4-Channel Control
• Assembly: Fully Assembled and Ready to Fly (RTF)
• Recommended Age: Suitable for Beginners、Kids And Adults

Specs:
Version: RTF
Length: 500 mm
Wingspan: 400 mm
Material: EPP
Motor:upgraded motor
Servo: 4CH
Battery: 7.4V 400mAh
Charger: USB cable
Remote control: 2.4GHz 4CH
Experience level: Beginners

Included：
1 x Aircraft Body
1 x 4CH-Remote Control
1 x Batteries
2 x Propeller
1 x Product Manual
1 x Landing gear

Required:
4 x AA batteries for transmitter