This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

Avios Albatross HU-16/BushMule V2 - Propeller Set 10x8 3-Blade Std/Reverse (2pcs). These props are also suitable for the Avios KingTwin, the only difference is the color of the tips.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

The Return of the “Stubby” Legend – Rediscover the Pure Joy of Flight

What makes a classic RC warbird stay relevant? It’s the ability to deliver maximum fun with minimum effort. The Durafly Brewster F2A Buffalo V2 920mm RC plane returns as the ultimate “grab-and-go” park-size warbird, combining authentic scale looks with modern Plug-N-Fly convenience.

A replacement 11.5x5 nylon reinforced propeller that's suitable for the 1300mm Tundra V1, V2, V3, and Night.

The Durafly Me-163B has been designed for pilots with some experience, it benefits from an incredible flight performance, great stability throughout its speed range, and like the real thing, it is incredibly fast. Aerobatics including huge loops, vertical rolls out of sight, and very fast low passes are easily achievable, yet slow it down and it's very stable, with no hint of a stall. Using the recommended 2200mah 30-65C 4S LiPo battery and the supplied 6x4 prop, you can expect flight times well beyond 5 minutes and an abundance of power. If you love speed and very fast models, then this one is for you, the Komet Me-163 is ballistic, with speeds approaching 100mph.

The Durafly™ Ugly Stick V2 not only looks as good as the original but flies just as well too, perfectly capturing those excellent flight qualities of which the Ugly Stick was renown. Being the well mannered RC sports model it is, the Ugly Stick is suitable for both novice and experienced flyers alike. At the lower end of the speed range, it exhibits no bad stall tendencies and can be flown comfortably at half throttle if desired. However, when you wish to experience its true flying capabilities, open the throttle wide and the Ugly Stick will oblige, performing a full range of sport aerobatic maneuvers with the ease that made the original so popular. Due to the low current draw of the Ugly Stick V2 power system, you can also enjoy longer than average flying times with mixed power use.

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

When Durafly released the original Auto-G it raised the bar by being the first Plug-N-Fly autogyro on the market, that bar has been raised even higher with the Auto-G2 V2. Keeping to the Durafly tradition, it is quick and simple to assemble, flies extremely well, and looks amazing in flight. The V2 upgrades include the addition of a durable 2mm fiber-reinforced nylon head plate, fiber-reinforced pushrods, a fully encased main mast, wider, stronger landing gear with large lightweight bush-style foam wheels, and a cowled-in motor, plus smaller internal electronics giving more space for the flight battery.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

Upgrade your Durafly Rare Bear Reno Racer to fly on a 6S battery pack by using this dedicated Durafly 6x4.5 propeller. The Durafly Rare Bear is fast on a 4S pack, but just wait until you try a 6S, it is mind-blowingly fast and will add something like an amazing 15mph to the top speed.

However, with more speed and power comes even more responsibility on the pilot. Extra consideration must be made when balancing the prop and spinner, checking the tightness of the prop nut, inspecting the overall integrity and security of the model and control surfaces, etc.

“Please note that all testing on a 6S was performed with this Durafly RB 6x4.5 prop. This is the only prop we can recommend when using 6S. Use of other similar sizes and brands can therefore not be recommended.”

The B-17 Flying Fortress remains one of the most famous allied bombers of WW2.  Although it served in every theatre of the war, it was in the European Theatre of Operations (ETO) with the renowned 8th Air Force in particular, that this sturdy and well-armed heavy bomber flew its way into the history books.

Building on the success of our original HobbyKing "Memphis Belle" model we have redesigned this huge 1875mm wingspan warbird and now bring to you the best flying and best-looking rendition of this iconic heavy bomber available anywhere in this size. 

Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed.  It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.

The pre-fitted electric scale wheels retract forward like the real aircraft and are large enough to tackle almost any surface.  There is also plenty of power on tap from the four upgraded 850kv brushless motors. Counter-rotating props make zero torque, smooth take off's, the order of the day and with pre-fitted split flaps, landings are also stress-free.

But it's the attention to detail on this version that is impressive.  Panel lines have been reduced and two new accurate scale color schemes are now available.  Olive drab/grey and overall silver. These two schemes represent the vast majority of B17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant. 

As a Flying Fortress, our model also bristles with guns, with top and ball turrets as well as tail, nose, and waist gun positions.  Dummy Wright Cyclone engines are finished with three-blade counter-rotating scale props and hubs and finally, working navigation & landing lights add to the overall realism level of this impressive model.

Beneath the surface, our B-17 has been beefed up with additional wing bracing and of course, she has been test flown extensively and it's in the air that this model really comes into its own.

You will be struck at how easy it is to fly, almost like a powered glider at times and even though it's more than capable of performing non-scale aerobatics including loops and rolls, it is at slower speeds that it looks every bit the heavy bomber.

With its impressive wingspan, low passes translate into a real presence in the air and the sound of those four props driving it forward just adds to the experience.

Our B-17 is a scale pilot's dream model. It's a big airplane that looks great, flies beautifully, and definitely has the "wow" factor that will have heads turning wherever and whenever you fly it.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

Spinner set for Durafly P-40 Warhawk V2 to replace

Learn More

This is a replacement parawing/canopy for the H-King Paramotor V2 2400mm. It is supplied with the risers/shrouds pre-assembled and attached at the factory. This replacement parawing is not supplied with the gondola or the landing gear, etc.

A replacement pair of 11x8 folding prop blades for the Avios Kobuz Sports-Scale Aerobatic Glider.

The Durafly Gloster Gladiator is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.

Forged by Kings in a distant realm, the legendary Excalibur has proven to be a force to be reckoned with. It is now available in an updated version which includes a brand new eye-catching, high-viz color scheme, improved propeller assembly, metal-geared servos, and even more carbon and glass fiber reinforcement, the Excalibur V2 has arrived! Its innovative design features things such as a cantilever forward-swept wing, V-tail tail surfaces, incredibly strong construction, and stunning lines.

Albatross HU-16 V3V3 - Propeller Set 10x8 3-Blade Std/Reverse (2pcs)

A replacement set of 15x10 propeller blades for the Avios Spitfire Mk.1a 1450mm (3pcs).

"Learn to Fly the Tundra Way" with the Prime Tundra PT1200. This is yet another addition to the extremely popular Tundra series of STOL (Short Take-Off and Landing) airplanes from Durafly, but this one is aimed primarily, but not exclusively at the novice. The PT1200 is the perfect STOL trainer for those that want to get into this style of flying, as it inherits the excellent STOL flying characteristics of the Tundra lineage, it's also a lot of fun for seasoned Tundra fans to!

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Are you looking for extreme speed right out of the box? If so, we've got you covered. There is plenty of rad in the Radjet 800! With its amazing price, EPO foam, and being Plug and Fly, this brilliant model has no trouble earning the Radjet name.

While Avios are known the world over for their fantastic semi-scale models of powered airplanes, particularly waterplanes, their experience and dedication to designing and producing great flying models means they are perfectly placed to produce other types as well. The Avios Kobuz is a large, aerobatic, sport-scale model with outstanding flight characteristics of the SZD-21 Kobuz single-seat aerobatic glider, designed and built in Poland.

This flapped, 2200mm wingspan model features clean and aesthetic lines, it will fly fast or slow, has an incredible climb rate, and is very aerobatic with good speed retention in the glide. All these things are wrapped up in one big, beautiful package, which is then finished in a stunning hi-viz Swiss color scheme. The color scheme design is quite different top and bottom for great orientation when flying high or at a distance. One feature of the Kobuz is the very large canopy with instrument panel detail, which offers easy access to the battery and RC compartment. There is also plenty of room in the canopy if you wish to convert the Kobuz to FPV.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

A replacement 5x5 propeller for the Durafly MFX Racer.

This striking version of the Durafly T-28 Trojan comes in a unique color scheme for the Naval Aviation Centennial (1911-2011) (US Navy). The Durafly T-28 is an impressive RC plane to fly and even has the ability to be upgraded for the extreme challenge of FPV flying.

The incredible Avios C-130 is back with two new hi-viz, vibrant, and lighter in weight color schemes, plus a host of other improvements. The improvements on the V2 are mainly aimed at reducing weight to improve the slow-flight handling characteristics. Like the original version, the C-130 V2 is completed to the highest level of scale detail, has a 1600mm wingspan, and measures over a meter in length.