Drones

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 610
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-tightening and have an insert fitted to suit 5mm motor shafts with colour coded hubs for easy identification.

Specs:
Length: 5inch
Pitch: 4.5 inch
Center Hole:5mm
Weight: 5g each
Rotation: Clockwise and counterclockwise

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

Quanum Exoskeleton for RunCam

Are you worried about your RunCam action camera not surviving a hard landing?  Simply give your RunCam a rigid exoskeleton frame.

Manufactured from super light weight alloy and machined to allow easy access to all of the RunCams many functions while maintaining a clear view from the lens, this frame gives you peace of mind when you send your favorite action camera into the thick of it!

Features:
• Purpose made to fit the RunCam Action Camera
• Tough, exoskeleton style design
• Superlight Alloy
• Access to all camera functions
• Bolt together case
• Lens shield

Specs:
Dimensions: 69 x 46 x 23mm
Weight: 21.5g

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

This Header pin type is perfect for repairing Servo pins on most 4 (or more) channel receivers.

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual or groups of pins.

There are 5 strips per pack.

Why settle for only being able to charge your DJI Phantom 2 batteries at home?

The Quanum DC Field Charger charger allows you to quickly and easily charge your Phantom 2 batteries at the field from just about any 10~26VDC power source! This means easy battery charging from your car or truck's starter battery!

Simply connect the alligator clips to your vehicle's starter battery and the output lead to the Phantom 2 battery. The output lead features a polarity-protected plug which prevents improper connection. This charger provides up to 4A of current, matching that of the original DJI Phantom 2 battery charger.

30P Pin Header and Socket - 2.54mm Pitch (5 pcs)

Perfect for DIY electronic projects.

This compact, lightweight power supply filter helps clean up dirty DC current that often causes lines in wireless video images. The filter is an LC type that uses large value inductor and capacitor components. Their values are robust enough to remove moderate amounts of power supply noise.

The filter reduces DC-DC switcher supply ripple and helps clean noisy power from a shared battery. For example, if your robot or R/C model's 12V motor battery also powers the video camera and A/V transmitter, then this LC filter can help reduce the video "noise" that may appear when the motor is running.

Note: Installations with severe power supply noise may not be fully cured with this filter. In such cases a shared battery should be avoided.

Features:
• L-C Filter circuit reduces DC supply noise
• Built-in Reverse Polarity protection
• Supports up to 14 VDC at 1.7 Amp (maximum)
• Compact design

Specs:
Voltage drop over filter: 225mV at 900mA
Impedence/ESR: 0.06Ohm at 100kHz/16V
Ripple Current: 1190mA
DC Resistance: 0.25 Ohm/path
Dimensions: 38x12.5x11.5mm
Weight: 6.4g

HobbyKing™ Micro BEC 5V/1A

This great new switching mode BEC is the smallest yet made by HobbyKing. Our engineers developed this with micro and race quads in mind. It is extremely small and light weight but gives you excellent power for the Fight Controller, RX, etc.

Specs:
Input: 2-4cells Lipoly
Output (Constant): 5v/1A
Type: Switching
Input protection: Reverse polarity protection
Size: 10x9x7mm
Weight: 1.4g (wires included)

Multistar 1704 V2 Prop Adapter Set 2 x CW / 2 x CCW.

High-quality prop adapter set to fit the Multistar 1704 range of motors. The package contains 2 x clockwise and 2 x counter-clockwise adapters and a complete set of the required fixing screws.

15x5.2 Folding Carbon Fiber Propeller Blades for DJI S800 Evo (2 pairs L/H & R/H Rotation).

Well made folding carbon fiber propeller blades for the DJI S800 Evo, improve the performance of your S800 with these very efficient propellers.

Specs:
Diameter: 15ins
Pitch: 5.2ins
Mounting Hole: 3mm
Mounting Hub Thickness: 4.15mm
Weight: 7.5g per blade
Rotation: 1 pair of each L/H and R/H
Material: 3K plain weave carbon fiber
Color: Black

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

As supplied these propellers are ready to fit a 6mm shaft but this can be reamered to suit shafts up to 10mm, adapters for a 5mm shaft are also included.

Specs:
Length: 14 inch
Pitch: 4.7 inch
Mounting Hole Diameter: 6mm
Hub Thickness: 7.5mm
Weight: 24g each
Rotation: Clockwise and counterclockwise

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

These propellers are specifically designed for DJI multirotors that have the ability to perform 3D flight, they will perform equally well whichever way up the multi-rotor is.

The props have a center hole of 8mm which suits DJI multirotors.

Specs:
Length: 8 inch
Pitch: 6 inch
Center Hole: 8mm
Hub Thickness: 10mm
Weight: 8g each
Rotation: Clockwise and counterclockwise

These nicely made carbon propellers have been designed specifically for large multi-rotors. They will make transportation much easier by allowing you to fold the blades back to the boom arms, much like transporting an RC helicopter.

Carbon propellers are much stiffer and lighter than conventional type blades which means you will instantly see an increase in performance. These blades are supplied as a set, which means you get 1 pair of clockwise rotation blades and 1 pair of counter-clockwise blades.

Specs:
Diameter: 17 inches
Pitch: 6 inches
Hub Thickness: 5mm
Bolt Hole: 3mm
Material: Carbon fiber
Weight: 13g (each blade)
Rotation: Clockwise and counter-clockwise

Introducing the HobbyKing™ HMF X240 quadcopter frame kit; a compact FPV capable quadcopter with big capability.

The HMF X240 is a mini sized quadcopter measuring in at 280mm from arm to arm, this robust and cost effective multi-rotor is perfect for FPV racing or negotiating an obstacle course at your local field.

A carbon composite frame makes this compact quad extremely durable whilst remaining flexible, giving you the confidence to push the limits and yet it weighs just 80 grams.

The HMF X240 will accomodate a camera setup on the front or top platforms (why not take a walk on the wild side and have both??)
With space at the rear for your video transmitter, the protected space in the centre of the frame will accept most popular flight controllers.

Four integrated strap slots on the bottom hold the battery in place and allow for easy swap over between flights without compromising cooling.
Vented, double-deck arms provide protection and unimpeded cooling airflow for the recommended  10~15A ESC's while the simple, shock-absorbing undercarriage arrangement will guard against those less than perfect landings.

Any motor in the 13~18mm range with 12mm mounting bolt spacing will drop straight onto the motor mounts and will be sure to give a sparkling performance in the right hands.

The HobbyKing™ HMF X240 is a budget minded FPV racer, sport and all-round fun machine, ready for action with the minimum of fuss.

Features:
• Modular, carbon composite construction for durability
• Large 55 x 55mm protected flight controller bay
• Top mounted equipment platform
• Dedicated platforms for camera and video transmitter
• Wide range of motor and power options
• Unique, flexible landing gear

Specs:
Width: 280mm
Height: 78mm with landing gear and top platform
Motor mounting holes: 12 x 12mm
Weight: 80g

Required:
4 x Motors 1306~1806
1 x Battery 800~1300mah 7.4~11.1V (2 or 3 cells Lipoly)
4 x Propellers up to 6in
4 x ESC’s 7~12A
1 x Multi-Rotor Flight controller
4~6 ch radio
FPV gear (optional)

Looking for the professional finish on your next quadcopter project? look no further! This simple and easy to install light module set, will not only provide you with a proffesional look but will also allow your quadcopter to be seen in any conditions with its super bright LEDs

The LED flash light set offers a wide voltage input range from 2-6s and is suitable for quadcopters up to 500mm diameter. 

Features:
• Suitable for quadcopters up to 500mm diameter
• Wide input voltage, 2-6s capability
• High efficiency frequency conversion circuit
• Low power consumption
• No flashing delay or brightness reduction
• High power output
• Simple frequency adjustment

Specs:
LED Cable Length: 500mm
System Weight: 48g
Input Voltage 7.4v ~ 22.2v

Protect your multirotor ESC / battery connectors from impact or prop damage with these handy
PCB's. Simply solder your Male XT90 connector directly to the board and secure to your multirotor
frame with some 3mm nuts and bolts.

Specs:
Length: 35mm
Width 10mm
Depth: 1.5mm
Hole Spacing: 35mm max

By harnessing the power and imagination of the open source community, OpenPilot have created a new generation of powerful, low cost flight controller known as CopterControl that is suitable for multirotors, helicopters and fixed wing aircraft.

The Open Pilot CC3D Revolution (Revo) is the result of 1000's of hours of R&D work by the open source community, for the benefit of everyone and provides a robust base for commercial, research and hobby projects alike.

The Revo flight controller features state of the art hardware and software, backed by the Open Pilot GCS FC System and boasts position hold and 3D waypoint navigation among its many features. It is a full 10DOF with gyroscope, accelerometer, magnetometer and barometric pressure sensors.

The Revo uses the STM32F4 CPU which uses a hardware floating point unit (FPU,) that represents a huge advancement for hobby-class autopilots. This FPU allows precise, low-latency processing of real-life measurements using advanced attitude estimation algorithms.

In addition to an integral FPU, the STM32F405RGT6 chip has the ARM Cortex-M4 core at 210MIPS and saturation arithmetic DSP functions.

The CPU has a range of built-in hardware modules that can be programmed once and function independently, requiring little to no CPU overhead.
These include 14 multi-channel timers, 3 synchronous-sampling ADCs serving up to 24 channels, 2 DAC, matrix memory controller with 16-stream DMA.
Communication modules include USB2.0, 3 x I2C, 3 x SPI, 4 x USART, 2 x CAN and SIDO. All these modules can be configured for accessing the chip pins using a flexible switch matrix, or disabled to save power. USB connectivity ensures that software updates and settings are straightforward to make in the GCS (Ground Control Station.)

The flight controller features a built-in 433MHz OPLink Modem and uses the standard OpenPilot footprint so has the same dimensions and mounting holes as the OpenPilot CC, CC3D, GPS, OSD and PipX boards.  

The Revo has an incredible array of functions to manage all of your flight parameters, and while it doesn't have the kitchen sink, it does a real time hardware calendar if you ever feel the need for a wake up flight!

Features:
• Open source development
• Flexi-IO Port for input/output
• MainPort (Telemetry) serial USART w/adjustable baud rate.
• FlexiPort for telemetry funtions
• 433MHz RF output
• Power Sensor/Sonar Port
• STM32F4 32 bit  CPU
• ARM32 powered digital packet processor
• USB2.0, I2C, SPI, USART, CAN and SIDO communication modules
• 14 Multi-channel timers
• 3-Axis gyro
• 3-Axis accelerometer
• 3-Axis Magnetometer
• Barometric pressure sensor
• PWM/PPM for configuration with Futaba, FrSky, Spektrum (inc satellite) receivers and many others.

Specs:
Input voltage: 5 ~ 8.4V
Telemetry link: 433MHz
Power connectors: JST-SH 4-pin
Antenna connector: SMA
Dimensions: 36 x 36mm
Weight: 9g

Included:
OpenPilot CC3D Revolution (Revo) Flight controller w/Internal 433Mhz Radio
10 Pin cable
4 Pin cable
Antenna extension cable
Antenna

Full configurations instructions can be found in the  OpenPilot manual:

http://opwiki.readthedocs.org/en/latest/user_manual/index.html

Quanum MT series motors are Spec built by DYS, well known in the industry for their quality and performance.

The MT line uses quality NMB bearings, high pole counts for torque and smooth operation and all have standardized universal mountings in their given size. Quanum has spec’d the motors with N42sh magnets and .2mm laminations for optimal efficiency. The MT’s also have ample motor wire length for a cut to fit installation, with included bullet connectors and shrink tube. Another great feature is that Quanum spec’d all the motors to come with mounting hardware in various lengths, as well as both hub and direct mount propeller options, so installation is a snap.

Each Quanum motor is QC checked for balance, wind, performance and mechanical tolerance. The DYS brand is well known for their BE series and the new spec built MT line will set new standards of value vs performance.

Features:
• High Power N42sh magnets
• Precision NMB bearings
• .2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included

Specs:
KV(RPM/V): 2000KV
Lipo cells: 2-3S
Max Power: 84.4W
Max Amps: 7.6A
No Load Current: 0.6/11.1V
Internal Resistance: 0.98ohm
Number of Poles: 14
Dimensions(Dia.xL):28 x 17mm
Motor Shaft: 2mm
prop shaft: 5mm CW prop adapter
Weight: 33g
bolt hole spacing: 16*19 M3
Lamination thickness:  0.2mm
Magnets: 42SH
Wire: 18AWG
Connector: 3.5mm bullet

PROP         Power/PWM     Voltage (V) Current (A)   Thrust (gf)   RPM
6x4.5 STD        10                 11.1          0.44          27.15        3451
6x4.5 STD        25                 11.1          2.62         163.01       8336
6x4.5 STD        50                 11.1          6.66           349.5      12040
6x4.5 STD        75                 11.1        13.53           571.3      15409
6x4.5 STD      100                  11.1       15.74          633.98      15935
6x4.5 STD        10                 14.8          0.59           44.33       4449
6x4.5 STD        25                 14.8            3.7         260.26      10489
6x4.5 STD        50                 14.8          9.75         549.91      14962
6x4.5 STD        75                 14.8         20.28         874.48      18361
6x4.5 STD      100                 14.8         22.45         914.19      18943

This compact F3 Flight Controller includes a FrSky receiver unit and 4 integrated 20A ESCs. It utilizes the DShot 600 protocol (Betaflight compatible) to communicate between the flight controller and the ESCs, proven and tested sensors, and a next-generation CPU. This small, lightweight package delivers reliability and incredible flight performance.

Specs:
Input Voltage: 2-3S (they may handle 4S)
Receiver: FrSky compatible
ESC Protocol: DShot 600
ESC Output: 4 x 20A
Power Input Connector: JST
Dimensions: 20mmx20mm

KingKong Multirotor Propeller 6x4 CW Black (10pcs)

Includes:
10 x 6040 Propellers (CW)

This handy little accessory will allow you to easily split a single receiver channel output into five. A handy accessory for those building multicopters as it gives you an easy way to program the throttle range into your ESC's all together prior to fitting them to your frame. It can also be used as a splitter in LED lighting systems.

Spec:
Lead length: 60mm
Weight: 3g

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the other leads turned on their side for signal only, makes for a clean and minimal vibration transfer installation. Or better yet a single CPPM/SBUS single lead. 

Specs:
Length: 130mm(black/red/white)
Connection: Male JR style plug on each end.

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the leads turned on their side for signal only makes for a clean and minimal vibration transfer installation, or better yet a single CPPM/SBUS single lead.

Specs:
Length: 80mm(black/red/white)
Connection: Male JR style plug on each end.

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)