Accessories

Well made self tighening propellers, improve the performance of your multirotor with these efficient propellers.

The pack contains 1 x clockwise and 1 x counter clockwise rotating props. 

Specs:
Prop Size: 5 x 3.2ins
Pitch: 3.2
Mounting Thread: 5mm
Weight: 4g per blade
Rotation: 1 each L/H and R/H
Material: Nylon
Color: Red

Aluminum Folding Propeller Spinner 40mm Diameter w/5.0mm Shaft Adapter.

Dimensions as per image:
A: 39.8mm
B: 45.2mm
C: 5mm
D: 31mm
E: 3.75mm
F: 36.7mm
Blade Retaining Bolts: 3mm
Weight: 34g

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

This Header pin type is perfect for repairing Servo pins on most 4 (or more) channel receivers.

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual or groups of pins.

There are 5 strips per pack.

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set does not include the separator tool. Adapters with the separator tool included can be found here

Also available for XT-60

Specs:
Plug Type: T-plug
Qty: 20
Weight: 0.9g (pair)

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Males.

Also available as:
XT-60 Female
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Females.

Also available as:
XT-60 Male
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Female
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Males.

Also available as:
T-Plug Female
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females.

Also available as:
T-Plug Male
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Female
Qty: 6 pieces
Weight: 3g

 
 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females/Male

Also available as:
T-Plug Male
T-Plug Female

Specs:
Plug Type: T-Plug Female/Male
Qty: 12 pieces (6 Male, 6 Female)
Weight: 3g

M2 All Thread Rod 300mm (2 pieces) Great for custom control rods or other DIY projects

The cable tie clip mounting set is the perfect solution for the modeller who likes a neat and tidy install. The clips provide slots for cable ties up to 4mm width and can be simply glued in onto the desired position within your model.

The clips are suitable for fiberglass, foam or wooden models but can be used for almost any application.     

Specs:
Material: ABS Plastic
Weight Per Set: 11g
Fits: 4mm cable ties

The Turnigy glider bag backpack is great for securely carrying your glider to a remote slope location, where your parking area is far from your flying area. Just strap it to your back and go! Made of durable 600 denier nylon, this wing bag is designed to handle every day use for years to come.

A main compartment holds your wings and fuselage, while a separate compartment holds your transmitter or other accessories. There is even a compartment designed specifically to hold your wing tubes. The compartments are closed with drawstrings and the shoulder straps adjust to fit any size person.

Perfect for 2 meter or larger sailplanes. For smaller sailplanes take a look at our smaller Turnigy Glider Backpack

Specs:
Main Compartment Size: 1300 x 310 x 70mm
Accessory Compartment Size: 200 x 170 x 120mm

Avios Hawker Sea Fury 1200mm - Propeller Set

Includes:
5-Blade Hub
5 * Propeller Blades
5 * Screw
5 * Locknut

*NOTE - this propeller is for static display only. It is not intended to be used for the purposes of propelling the aircraft to fly. 

Dalprops "Indestructible" PC 5040 4-Blade Props Yellow (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Yellow 
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Dalprops "Indestructible" PC 5040 4-Blade Props Green (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Green 
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Dalprops "Indestructible" PC 5040 4-Blade Props Purple (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Purple
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Durafly™ T-28 Trojan 1100mm V2 - 10x6 3-Blade Propeller

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These propellers are just fantastic value for electric flyers.  In packs of five these great looking props work out cheaper than corner store candy and at this price they are even sweeter, so now is the time to stock up.

Each pack also comes with a selection of prop shaft adapters, one set for each prop, to ensure a perfect fit for your motor.

These plastic props are perfect for your small free flight model project.  

Specs:
Material: Plastic
Color: Grey
Length: 7"
Weight: 4.1g

These plastic props are perfect for your small free flight model project.  

Specs:
Material: Plastic
Color: Grey
Length:8"
Weight: 5.1g

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 35mm
Axle diameter: 2mm
Weight: 2.4g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 40mm
Axle diameter: 2mm
Weight: 2.6g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 50mm
Axle diameter: 3mm
Weight: 4.7g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 55mm
Axle diameter: 3mm
Weight: 5g

Includes:
5 x wheels

These metal control horns are ideal for large scale models .  The pack includes two control horns and a nylon ball link with nut and bolt.

Specs:
Size: 37mm x 37mm
Weight: 4.7g (one control horn)

For heavy duty and scale applications you can't beat a pull/pull wire control system. Once adjusted correctly pull/pull systems are reliable and accurate and for scale aircraft like a Tiger Moth they certainly add scale realism as well as functionality.  

Pull/pull systems are also great for weight saving over conventional push rods and can be used for awkward and tight areas within fuselages.

Specs:
Wire diameter: 0.8mm
Wire Length: 2 x 1m lengths

Includes:
Wire
4 x pieces of heatshrink
4 x crimps
4 x threaded brass links

These Nylon clevis are suitable for push rods up to 1.5mm and offer a screw lock function for a secure fit.

The Clevis are supplied in packs of 10 and arrive complete with 1.75mm locking screws.

Specs:
Material: Nylon
Length: 15mm
Weight: 0.25g

Nylon Linkage Stopper 0.85 x 1.75 x 6mm (10pcs)

Specs:
Material: Nylon
Fits: 0.85mm Pushrods
Lock Screw: 1.75mm
Body length: 6mm
Weight: 0.11g