Accessories

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 10 inches
Pitch: 5 inches
Center Hole Dia: 6mm
Hub Thickness: 12mm
Weight: 17g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 10 inches
Pitch: 6 inches
Center Hole Dia: 6mm
Hub Thickness: 13mm
Weight: 17g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 11 inches
Pitch: 5 inches
Center Hole Dia: 6mm
Hub Thickness: 13mm
Weight: 24g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 11 inches
Pitch: 6 inches
Center Hole Dia: 6mm
Hub Thickness: 14mm
Weight: 24g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 11 inches
Pitch: 7 inches
Center Hole Dia: 6mm
Hub Thickness: 14mm
Weight: 24g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications 
• Center hole pre-drilled

Specs:
Diameter: 12 inches
Pitch: 6 inches
Center Hole Dia: 6mm
Hub Thickness: 14mm
Weight: 26g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 13 inches
Pitch:  4 inches
Center Hole: 6mm
Hub Width: 13mm
Weight: 32g

Aerostar products are reknown for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 13 inches
Pitch:  5 inches
Center Hole: 6mm
Hub Width: 13mm
Weight: 32g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 13 inches
Pitch:  6 inches
Center Hole: 6mm
Hub Width: 14mm
Weight: 35g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 14 inches
Pitch:  8 inches
Center Hole: 8mm
Hub Width: 17mm
Weight: 44g

Alloy Clevis for Non Threaded 2mm Control Rod

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

3.5mm Gold connectors.
Rated to around 80A

Package contains 10 PAIRS (20PC) of connectors.

2mm Gold connectors.

Package contains 10 PAIRS of connectors. (20pc)

4mm Gold connectors.

Package contains 10 PAIRS of connectors.

Aerostar Composite Propeller 10x5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 11x5.5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 13x4 Bone (CCW) (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 14x7 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 8x4 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

The Turnigy Electrical Switch is a rugged solid state switch that has no contacts to fail like traditional mechanical switches. It can work on 4~8 NiMh/NiCD cells or a 2S 7.4V Lipoly battery. It features a Lipo mode which offers low voltage protection to the battery should the pack dip below 6.0V. A LED voltage indicator gives you at a glance status of your receiver so you always know how much of your pack is left. The plastic case has two tabs molded in allow you to mount it easily to your airframe for nice clean installations.

Features:
• Momentary on/off switch
• Screw mounting tabs
• Connectors work with JR/Futaba type servo plugs
• LED voltage indicator
• Lipo mode has voltage cutoff to protect lipoly batteries from over-discharge

Specs:
Input Voltage: 4.8~10V (2S Lipoly, or 4~8 cell NiMh/NiCD)
Continuous Current: 8A
Max Burst Current: 14A (10 sec)
Size: 43x33x9mm
Weight: 9g
Connectors: Futaba (Works with JR)

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs:
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Specs:
Maximum throughput : 10A / 30v
Weight: 7g

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

Very well made and finished lightweight alloy straight oleo struts suitable for main undercarriages. These struts are sprung loaded which helps smooth out those slightly heavy arrivals.

Well made self tighening propellers, improve the performance of your multirotor with these efficient propellers.
The pack contains 1 x clockwise and 1 x counter clockwise rotating props. 

Specs:
Prop Size: 5 x 3.2ins
Pitch: 3.2
Mounting Thread: 5mm
Weight: 4g per blade
Rotation: 1 each L/H and R/H
Material: Nylon
Color: Black