Workbench

10x5E Carbon Fiber Propellers CW and CCW Rotation (1 pair)

These carbon props are very stiff and lighweight, they are ideal for your multi-rotor project, very efficient and give increased power with less current draw.

Specs:
Diameter: 10 inch
Pitch: 5 inch
Hub Thickness: 6.9mm
Shaft Diameter: 5~6mm (with adapters)
Weight: 15g each propeller

Note: These props are for electric use only.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for glow or electric. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 2.25 inch (57mm)
Length: 3.12 inch (80mm)
Fixing Bolt Diameter: 4mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for glow or electric. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 2.5 inch (64mm)
Length: 3.5 inch (89mm)
Fixing Bolt Diameter: 4mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for glow or small gas engines. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 3 inch (76mm)
Length: 4inch (102mm)
Fixing Bolt Diameter: 5mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for glow or small gas engines. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 3.5 inch (89mm)
Length: 5.5inch (140mm)
Fixing Bolt Diameter: 5mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for gas and large glow engines. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 4 inch (102mm)
Length: 5.5inch (140mm)
Fixing Bolt Diameter: 5mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These spinners are really beautifully finished and come with a high quality machined backplate.They have a pointed shape so look good and add that finishing touch to many different types of aircraft, ideal for gas and large glow engines. Supplied uncut so they will suit 2 blade and multi blade props.

Specs:
Diameter: 4.5 inch (115mm)
Length: 6.4 inch (162mm)
Fixing Bolt Diameter: 5mm
Shaft Diameter: 10mm

Note: Not supplied with adapter or fixing bolt.

These are some nice Carbon Blades for Multi-rotor projects, they are supplied as a counter rotating pair (1 left, 1 x right). These blades weigh 19g each and are very well finished! This propeller pair is supplied with contentric centering rings to ensure accurate centering.

Specs:
Diameter: 12 inch
Pitch: 6 inch
Hub thickness: 8mm
Shaft diameter: 6mm
Weight(each): 19g 

These are some nice Carbon Blades for Multi-rotor projects, they are supplied as a counter rotating pair (1 left, 1 x right). These blades weigh 15g each and are very well finished! This propeller pair is supplied with contentric centering rings to ensure accurate centering.

Specs:
Diameter: 11 inch
Pitch: 5 inch
Hub thickness: 8mm
Shaft diameter: 6mm
Weight(each): 15g 

Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fiber Folding prop set with metal insert for M3 mounting screws.

Size: 10 x 6
Weight: 8g (Pair)

Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fiber Folding prop set with metal insert for M3 mounting screws.

Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fiber Folding prop set with metal insert for M3 mounting screws.

Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fiber Folding prop set with metal insert for M3 mounting screws.

Carbon Fiber Landing Gear 150mm
Width: 19mm
Weight: 23g
Height: 150mm (height measured from the center of the wheel to the base of the fuselage.

Carbon Fiber Landing Gear 160mm (1 Pair)
Super light weight.
Very strong
Height: 160mm (the height from the centre of the wheel to the base of the fuselage.)
Width as shown in image: 30mm
Length as shown in image: 185mm

These are some nice Carbon Blades for Multi-rotor projects, they are supplied as a counter rotating pair (1 left, 1 x right). These blades weigh 15g each and are very well finished! This propeller pair is supplied with contentric centering rings to ensure accurate centering.

Specs:
Diameter: 11 inch
Pitch: 4.7 inch
Hub thickness: 8mm
Shaft diameter: 6mm
Weight(each): 15g 

Precision 3" Carbon Fiber Spinner with alloy backplate, suits 6 and 8mm shafts.

Weight: 48g 

Carbon fiber propellers to suit the DJI Phantom Quadcopter, 1 pair of CW and CCW rotation, these props are 8x4.5 so can be used for other applications.

Specs:
Diameter: 8 inch
Pitch: 4.5 inch
Hub Thickness: 8mm
Shaft Diameter: Upper side 6mm/lower side 8mm
Weight: 5g each propeller

Super strong & stiff, lightweight and efficient non-weave carbon composite Folding prop set with alloy insert for M3 mounting screws.

Super strong & stiff, lightweight and efficient non-weave carbon composite Folding prop set with alloy insert for M3 mounting screws.

Weight: 12g (Pair)

Mount Root: 8mm

Super strong & stiff, lightweight and efficient non-weave carbon composite Folding prop set with alloy insert for M3 mounting screws.

Weight: 16g (Pair)

Mount Root: 8mm

Carbon Fibre Tail Wheel Bracket - 30 to 50CC Models

Specs.
Length: 124mm
Thickness: 3mm
Width: 14mm
Weight: 7g

Specs.
Length: 199mm
Thickness: 3.3mm
Width: 18mm
Weight: 19g

Carbon Fibre Tail Wheel Bracket - Up to 150CC Models

Specs.
Length: 220mm
Thickness: 3.3mm
Width: 20mm
Weight: 20g

Precision 2" Carbon Fiber Spinner, suits 6mm shaft.

Weight: 22g 

Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fibre Folding prop set with alloy insert for M3 mounting screws.

Weight: 24g (Pair)

Mount Root: 8mm

Carbon Fiber Landing Gear 95mm
Gear Width: 17mm
Weight: 12.5g
Height: 95mm (height measured from the center of the wheel to the base of the fuselage.

These are some nice Carbon Blades for Multi-rotor projects, they are supplied as a counter rotating pair (1 left, 1 x right). These blades weigh 17.9g each and are very well finished! This propeller pair is supplied with contentric centering rings to ensure accurate centering.

Specs:
Diameter: 13 inch
Pitch: 4 inch 
Hub thickness: 8mm
Shaft diameter: 6mm
Weight(each): 17.9g

These are some nice Carbon Blades for Multi-rotor projects, they are supplied as a counter rotating pair (1 left, 1 x right). These blades weigh 17g each and are very well finished! This propeller pair is supplied with contentric centering rings to ensure accurate centering.

Specs:
Diameter: 12 inch
Pitch: 3.8 inch
Hub thickness: 8mm
Shaft diameter: 6mm
Weight(each): 17g