The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

The Turnigy TrackStar TS series of ESCs are the latest generation of competition-level 1/10 scale car speed controllers. They are simple to use, have up to amazing 64° TURBO and BOOST timing settings, offer explosive power, smooth start-up and acceleration, and include a whole host of easy programming options. Using intelligent MCU logic and top-notch components, they set a new standard in quality, yet affordable car electronic speed controllers. The included BEC system is an ultra-stable switch "V" regulator which is switchable from 6~7.4V and can deliver a constant current of 5A, and a peak of 8A.

These ESCs have 34 separate adjustable parameters which can be easily programmed using the optional smart program box (sold separately). These programming options are too many to list here, but a few of the main options are shown below, the rest can be seen in the attached manual under the "Manuals/Files" tab. Other features are multiple protection functions, low voltage, heat protection, etc, built-in super switch mode BEC, offline data recording, cooling fan, and more.

The Turnigy TrackStar TS series of ESCs are the latest generation of competition-level 1/8 scale car speed controllers. They are simple to use, have up to amazing 48° TURBO and BOOST timing settings, offer explosive power, smooth start-up and acceleration, and include a whole host of easy programming options. Using intelligent MCU logic and top-notch components, they set a new standard in quality, yet affordable car electronic speed controllers. The included BEC system has an ultra-stable super-switching mode regulator which is programmable from 6~7.4V and can deliver a constant current of 8A, and a peak of 12A.

These ESCs have 33 separate adjustable parameters which can be easily programmed using the optional smart program box (sold separately). These programming options are too many to list here, but a few of the main options are shown below, the rest can be seen in the attached manual under the "Manuals/Files" tab. Other features are multiple protection functions, low voltage, heat protection, etc, built-in super switch mode BEC, offline data recording, cooling fan, and more.

The QUICRUN series of ESCS is the latest range of competitively priced brushed and brushless Speed Controllers for use in a wide range of RC vehicle applications. 

The QuicRun WP 1625 is specially designed for beginners and intermediate modelers.

The QUICRUN 880 Dual ESC is a durable, highly reliable waterproof electronic speed controller that has been designed for twin brushed motors in 1/10 and 1/8th scale vehicles. The HobbyWing patented copper heat conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heatsink for faster and greater heat dissipation.

A standard car esc. providing forward and reverse with a large range of motor compatability for up to 240,000RPM motors. 

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-3S Lithium batteries / 4~9 Ni-xx
Cont. Current: 30A
BEC output: 2A /5V (Linear)
Size( length X width X high): 45x32x20mm
Weight: 51g
 

Standard 60A car esc with forward reverse and a good range of features such as timing adjust and braking. Supports a wide range of motors. Very reliable!

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-4S Lithium batteries / 4~15 Ni-xx
Cont. Current: 60A
BEC output: 3A/5V (Switch)
Size( length X width X high): 47x41x29mm
Weight: 82g

Hobbyking® X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.

Standard 10A car esc with forward reverse and a good range of features such as timing adjust and breaking. Supports a wide range of motors. Very reliable!

HobbyKing® ™ X-Car Beast series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today! 

Built with high quality components, and offering both sensored and senorless motor operation, this 1/8 Scale 150A series ESC offers truly versatile and high performance that won't break the bank.

Features:
• Enhanced throttle response for excellent accelleration
• Uses advanced PC interface to set up or update firmware
• Uses both LED and LCD program cards 
• Adjustable BEC output 6.0V/8.4V
• Multiple protection features including low voltage cut off protection, over heating protection and throttle/signal loss
• Compatible with NOVAK, LRP, ORION brushless motors

Specs:
Continuous Current: 150A
Burst: 1080A
Resistance: 0.0002ohms
Suitable Motor Type: 4 Pole sensorless and sensored brushless motor
Battery:  2 ~ 6S Lipoly   5~18S NiMH/NiCd
BEC Output: 6.0V ~ 8.4V adjustable/3A 
Dimensions: 55x48x37mm
Weight: 165g

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g

HobbyKing® ™ X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 60A
Burst Current: 240A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-9 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 43 x 36 x 33mm
Weight: 84g
 
Includes:
60A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible programming card and USB adapter.

This is the USB link for programming your HobbyKing X-Car 120A & 60A brushless sensored/sensorless ESC. It will allow you to adjust all of the programming options quickly and easily via your PC.

Learn More

Upgrade your 1/18 RC rock crawler from a brushed motor setup to this smooth and powerful sensored brushless motor and ESC combo. The quality brushless motor adopts a unique 0.2mm silicon steel sheet stator, explosion-proof magnetic rotor, and produces an impressive max power of 120 watts. The specially designed ESC features excellent start-up, acceleration, and linear power characteristics, plus intelligent torque and speed closed-loop control for consistent motor RPM control under all loads.

A standard 45A car ESC with forward, reverse, and a good range of features such as timing adjustment and braking. It supports a wide range of sensorless brushless motors including 2 pole 240,000rpm, 6 pole 80,000rpm, and 12 pole 40,000rpm.

The Hobbywing EZRUN MAX10 G2-140A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC cars or trucks. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN MAX10 G2-80A ESC offers strong, explosive power, linear low-speed control, and a great sense of overall control for your 1/10 RC car or truck. With its upgraded, adjustable BEC system making it suitable for HV servos, and its water and dust-proofing to IP-67 standards, it's the perfect choice for all your race needs.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-5400KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-3300KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.

The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-4100KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10th RC car.

The Hobbywing QUICRUN Fusion PRO 2300KV 540 sensored brushless motor with integrated 60A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.

Hobbywing QUICRUN WP 1080 G2 80A 2-3S Brushed ESC designed specifically for 1/10 crawlers offers a high performance at a low price, it is extremely robust, reliable, and packed full of features. One of the major features which makes it ideal for crawlers is the "real car mode", this mode allows the motor to be switched in real-time. This mode will require a spare channel on your RC system with a 3-position switch. This will then allow you to select "forward with brakes", "forward with reverse and brakes", or "forward and reverse", this feature will provide the user with a unique driving experience like you have never seen before.

The Hobbywing QUICRUN 10BL60 60A sensored/sensorless brushless ESC for 1/10-1/12 cars and buggies offers high performance at a low price, it is extremely robust and reliable and is suitable for most types of competitive racing. Its compact size means it is suitable for a variety of car and buggy chassis, and it will auto-identify either sensored or sensorless brushless motors. The temperature of the ESC is kept within limits by the very efficient cooling fan that runs from the 6V BEC system and the finned, aluminum-red anodized heatsink.

The Hobbywing QUICRUN WP range of ESCs is suitable for the harshest of environments when racing or bashing due to its exceptional water-proof and dust-proof design. This protection level is up to IP-67 standards, which means it is splash-proof, water-proof, and dust-proof under normal use, it has not been designed to be permanently immersed in water for any period of time. The G2 version offers innovative intelligent freewheeling technology, is highly efficient, operates at a lower temperature for improved reliability, and has an upgraded BEC system suitable for HV servos. This upgraded BEC system is adjustable from 6-7.4V, with a continuous current of 6A, and an amazing maximum burst current of 12A.

The Hobbywing QUICRUN Fusion SE 1200KV 540 sensored brushless motor with integrated 40A brushless ESC greatly reduces the overall size and weight of the conventional separate setup. It has been designed specifically for 1/10 crawlers and offers strong low-speed torque, extremely smooth running at low speeds, and is far superior to the common sensored brushless system that has gone before. This compact combo also includes a powerful, adjustable SBEC system (6~7.4V@6A) which makes it suitable for HV servos.