$2 - $4.99

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1200mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 94g (including wire, plug & case)
Dimensions: 128 x 17 x 20mm 
Balance Plug: JST-XH
Discharge Plug: T-Connector

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1200mAh
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 55g (including wire, plug & case)
Dimensions: 116x17x13mm
Balance Plug: JST-XH
Discharge Plug: T-Connector

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

Get an unfair advantage with Turnigy Nano-tech Airsoft Packs!

On the battlefeild, no one wants to compromise on fire power! That's why the legendary Turnigy nano-tech batteries are available as a drop-in replacement pack for an upgrade in firepower. 

Turnigy Nano-tech Airsoft batteries are superior to the standard NiMH batteries offering faster charge rates and higher voltages. In short, the first thing your opponent will notice is sustained rapid fire pinning him down.

It's clear why Turnigy Nano-techs are the go to pack for anyone who is serious about Airsoft.

Spec.
Capacity: 1000mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 20C Constant / 40C Burst
Weight: 72g (including wire, plug & case)
Dimensions: 101x20x16mm
Balance Plug: JST-XH
Discharge Plug: T-connector

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels.This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

*The length of balance charging wire may vary

Nitro Rumble - head button

Titanium Wheel Bar Holder - Basher 1/16 Mini Nitro Circus MT

Upgrade Spur Gear 97T 48P for BSR Racing BZ-222 Racing Buggy

Upgrade Spur Gear 87T 48P for BSR Racing BZ-222 Racing Buggy

Covers for Body (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35033

Durafly™ Spitfire Mk24 - 5-Blade Hub Set

Looking for the professional finish on your next quadcopter project? look no further! This simple and easy to install light module set, will not only provide you with a proffesional look but will also allow your quadcopter to be seen in any conditions with its super bright LEDs

The LED flash light set offers a wide voltage input range from 2-6s and is suitable for quadcopters up to 500mm diameter. 

Features:
• Suitable for quadcopters up to 500mm diameter
• Wide input voltage, 2-6s capability
• High efficiency frequency conversion circuit
• Low power consumption
• No flashing delay or brightness reduction
• High power output
• Simple frequency adjustment

Specs:
LED Cable Length: 500mm
System Weight: 48g
Input Voltage 7.4v ~ 22.2v

SWAT 34 inch Tactical Rifle Gun Bag (Kryptek Nomand)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry single rifle with length upto 34” inch
• Main Compartment (850mm X 310mm X 70mm)
• Magazine Pouches (Inside the Bag) carry up to Four M4 / M16 / AK 5.56
7.62 Type magazines
• Low profile zipper front pouch for tools and spare parts

Specs:
Weight: 950g
Material: 1000D Nylon
Color/Pattern: Kryptek Nomand(KN)
Dimension: 850mm X 310mm X 70mm 
Manufacturer: SWAT

SWAT 41 inchTactical Rifle Gun Bag (Kryptek Highlander)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry single rifle with length upto 41” inch
• Main Compartment (1020mm X 285mmX 70mm)
• Magazine Pouches (Inside the Bag) carry up to Five M4 / M16 / AK 5.56 / 7.62 Type magazines
• Low profile zipper front pouch for tools and spare parts

Specs:
Weight: 1050g
Material: 1000D Nylon
Color/Pattern: Kryptek  Highlander(KH)
Dimension:  1020mm X 285mm X 70mm
Manufacturer: SWAT 

SWAT 38inch Extreme Double Rifle Gun Bag (Kryptek Typhon)

Features:
• 1000D CORDURA Nylon Construction
• Two ways carrying method (Handheld / Shoulder)
• Padded loop protective edge
• Heavy Duty Zipper 
• Able to carry TWO rifle with length upto 38” inch
• Main Compartment (950mm X 275mm X 70mm)
• Sub-Rifle Compartment (820mm X 255mm x 60mm) 
• Magazine Pouches (Inside The Bag) carry up to Four M4 / M16 / AK 5.56 /
7.62 Type magazine

Specs:
Weight: 1650g
Material: 1000D Nylon
Color/Pattern: Kryptek Typhon
Dimension: Main Compartment (950mm X 275mm X 70mm) , Sub (820mm X
255mm x 60mm) 
Manufacturer: SWAT 

SWAT 3 Day Assault Backpack (Kyrptek Mandrake)

Features:
• Nylon Fabric Construction
• Withstand harsh combat situation 
• Heavy-duty zipper on main compartment 
• CamelBak & Hydration System ready with drink tube exit hole 
• Velcro Patch is ready to be attached onto the front 
• Come with Chest & waist belt for comfort use 
• Highest quality side release buckles 
• Come with cushion padded shoulder harness for comfort use 
• Perfect for Law Enforcement, Military Ops. Also great for outdoor skirmish game use

Spec:
Color: Kyrptek Mandrake
Weight: 1000g
Material: 1000 Denier CORDURA 
Size: Main bag (450mm X 350mm X 160mm) ; Front bag (390mm x 300mm x 60mm)
Manufacturer: SWAT

Protect your Xiaoyi action cam from dirt, splashes and minor knocks with this custom molded silicone case and lens cap set.
Can be used with similar sized cameras.

Specs:
Material: Silicone
Color: Red
Internal dimensions: 60.4 x 42 x 21.2mm

The Precision Spur Gear R2 83T is specially designed for 1/10th scale vehicles using hex type slipper pads such as Team Associated off-road vehicles and a great upgrade for your BZ-222. The Revision 2 version of the gears are precision machined from specially formulated composite material to ensure highest strength, low running noise and excellent reliability. 

The increased contact area improves durability without sacrificing efficiency. The precision machining not only increases the durability of the gears but also provides an improved gear mesh.

All gears feature machined vents and weight reducing holes to minimize heat build-up when running a soft slipper clutch setting. The gears are engraved with size markings for easy identification.

Features:
• Machined composite material for increased strength, low noise and improved reliability
• Increased contact area
• Machined vents and weight reducing holes to minimize heat build-up
• Engraved markings for easy identification

Specs:
Size: 48DPX 83T
Material: Composite
Weight: 5.7g

Polyester Hook and Loop Peel-n-stick (Black) (1 Meter)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Volantex Phoenix 2000  Replacement Spinner.

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

A high-quality double-sided tape that is perfect for securing servos, receivers, and many other items into your models. It is manufactured from shock-absorbing polyethylene foam with a strong acrylic adhesive applied to both sides, this PE foam is perfect for isolating sensitive electronic components from vibration. Other features of the tape are it is water-resistant, temperature resistant, and has UV protection.

A replacement pair of main landing gear retaining plates for the Durafly Tundra V2/V3 and Night Tundra.

Note: This replacement spare part for the Durafly Tundra V2 is not compatible with the Tundra V1.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement prop adapter for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement canopy and battery hatch for the H-King F-16 Fighting Falcon 550mm.

A replacement carbon wing spar for the H-King F-16 Fighting Falcon 550mm.

A replacement canopy and battery hatch for the H-King F-18 Super Hornet 588mm.

A replacement pair of vertical stabilizers with factory-applied decals for the H-King F-18 Super Hornet 588mm.

A replacement carbon wing spar for the H-King F-18 Hornet 588mm.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement pair of wing interplane struts for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement screw set for the XFLY Alpha Jet (12pcs).

A replacement screw set for the 750mm XFLY T-7A Red Hawk (12pcs).