$0.01 - $0.99

Alloy Anti-Slip TX Control Sticks Long JR TX (M4 Thread - Red) - Complete with Locknut, 29.5mm Long

NTM 28 Motor Mount Spacer/Stand Off 2mm (4pc)

Motor Mount Spacer Stand Off 2mm (4pc)

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

10mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 10mm
Inner Corner to Corner: 16mm
Outer Corner to Corner: 46mm
Weight: 5grams

10mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 10mm
Inner Corner to Corner: 23mm
Outer Corner to Corner: 46mm
Weight: 7grams

11mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 11mm
Inner Corner to Corner: 19mm
Outer Corner to Corner: 53mm
Weight: 6grams

20mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 20mm
Inner Corner to Corner: 30mm
Outer Corner to Corner: 53mm
Weight: 6grams

5mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 5mm
Outer Corner to Corner: 53mm
Weight: 9grams

25mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 25mm
Inner Corner to Corner: 33mm
Outer Corner to Corner: 53mm
Weight: 10grams

22mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 22mm
Inner Corner to Corner: 32mm
Outer Corner to Corner: 53mm
Weight: 8grams

16mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 16mm
Inner Corner to Corner: 25mm
Outer Corner to Corner: 53mm
Weight: 7grams

22mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 22mm
Inner Corner to Corner: 40mm
Outer Corner to Corner: 53mm
Weight: 11grams

30mm Shaft Universal Motor Mount

Spec:
Shaft Size: 30mm
Dimension: 78x60mm
Inner Corner to Corner: 61mm
Weight: 26grams

35mm Shaft Universal Circular Motor Mount

Spec:
Shaft Size: 35mm
Dimension: 54mm
Inner Corner to Corner: 54mm
Weight: 10grams

40mm Shaft Universal Motor Mount

Spec:
Shaft Size: 40mm
Dimension: 62x62mm
Inner Corner to Corner: 50mm
Weight: 19grams

M3.5 x 90mm Stand-offs With Clearance

Spec.
Step One
 Depth: 5mm
 Lenght: 46mm
Step Two
 Depth: 3mm
 Lenght:30mm

M3.5 x 115mm Stand-offs With Clearance

Spec.
Step One
 Depth: 5mm
 Lenght: 70mm
Step Two
 Depth: 3mm
 Lenght:30mm

Universal Mount - M3.5 Fastener kit

Included:
M3.5x17mm Screw * 4
M3.5x12mm Screw * 4
10x4x2mm Washer * 4
10x4x1mm Washer * 4

Alloy Anti-Slip TX Control Sticks Short (M3 for Futaba TX - Blue) - 12mm long + locknut, Total: 24mm

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Turnigy 9XR FPV Monitor Mounting Arm.

A mounting arm specially designed to hold Telemetry units or FPV Monitors on
top of your 9XR.
Compatible with most standard FPV monitors and our Quanum Telemetry system.

*Requires the 9XR Transmitter Stand (see related items)

3x30P Pin Socket - 2.54mm Pitch (5pcs/bag)

Perfect for DIY electronics projects.

Trainer Port/RF PCB Assembly - Turnigy 9XR Transmitter

Mask (Chrome) - Turnigy 9XR Transmitter

Trim Tabs - Turnigy 9XR Transmitter (4set)

This is a stock replacement for your Turnigy 9XR transmitter faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Silver

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic red

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Gold

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic blue

Transmitter Neck Strap Adaptor (Blue)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

Transmitter Neck Strap Adaptor (Red)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

Transmitter Neck Strap Adaptor (Silver)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.