$0.01 - $0.99

HXT 4mm to T-Connector Battery Adapter Lead (2pc)

This adapter will convert an HXT 4mm equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 7g (Each)

This adapter will convert a T-Connector equipped battery to an HXT 4mm for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

This adapter will convert an HXT 4mm equipped battery to an XT60 for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

105mm Female Molex 1.25 to Twin Male JST-SH 1.0mm Y Lead

JR Male to 2 x JST(Molex) Female 1.00mm (1pc)

This lead converts 2 x JST(Molex) 1.00mm pitch plugged devices to 1 x JR type male plug.

Specs:
Female Plug: 2 x JST(Molex) 1.00mm pitch
Male Plug: JR type
Length Overall: 123mm
Length Each Tail: 46mm

Micro JST(Molex) 1.0mm Pitch Y Lead (1pc)

Y lead for 2 x micro JST(Molex) plugged servo's or ESC.

Specs:
Male Plug: 2 x JST(Molex) 1.00mm pitch
Female Plug: 1 x JST(Molex) 1.00mm pitch
Length Overall: 105mm
Length Each Tail: 43mm

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

This data cable allows you to connect our 433/915MHz V1.1 Radio Telemetry Kits to your Walkera X800 GPS Quadcopter. The X800 flight controller has a data port which actually functions as a standard APM UART connection. The port is a specialized 4-pin connector which will not fit standard Molex style plugs.

This data cable will allow you to plug directly to the X800 FC data port and to our 433/915MHz V1.1 Radio Telemetry air module, allowing full access to wireless telemetry functionality of the APM based X800 flight controller.

Specs:
Connection: 4-pin Walkera style plug to 6-pin Molex style plug
Length: 180mm

*Note: Please see related items below for the compatible 433/915MHz V1.1 Radio Telemetry Kits.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

The Vortex FPV Racer from ImmersionRC is an incredible piece of kit for the serious competitor, but like all things flying the ocassional mishap is inevitable!

This crash kit is a convenient way to keep a stock of all of those plastic parts most likely to be damaged in a serious "departure from controlled flight"

Included are all parts which mount the motors to the carbon fiber arms, the plastic pivot points, foldable arm clips, and all other plastic parts.

No carbon fiber parts are included (see Crash Kit 2.)

Included:
1 x Front bumper (FR4)
2 x Side plates
8 x Arm clips
4 x Arm pivot tops
4 x Arm pivot bottoms
4 x Landing bumpers
4 x Landing mounts
4 x Motor mounts
8 x Hex bushes
1 x Camera support base
1 x Camera support arm
4 x Damper pins
4x Damper circlip
4x Screw HA2x8
4x Screw HA2x6

22mm 280 C-Shape Motor Mount (clamp style)

Spec.
Diameter: 22mm (Fits 280 Size Inrunner)
Length: 31.5mm
Weight: 9g

Tarot 450 Pro/Pro V2 DFC Feathering Spindle (TL48016)

The Tarot 450 Pro/Pro V2 DFC feathering spindles are uniquely designed to reduce the probability of the retaining screws coming loose.

Includes:
450 DFC Feathering Spindle x 1 (4x54mm)
Thrust Bearing x 2 (4x8x3.5mm)
Thrust Bearing Circlip x 2 (M4x6.5x1.5mm)
M2.5 Socket Head Screws x 2 (M2.5x6mm)
Washers x 2 (4x7.5x1mm)

This is a great way to avoid power shorts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to 20Amp these connectors are an excellent replacement for JST plugs on todays small yet high C rated batteries.

JR to EH Adapter wire (2pcs/bag)

Micro Servo Connector Lead 1.25 Pitch - Female Connector (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Solo Pro FP II Main Rotor Blade Set

Nylon Spinner w/ Accessories
Adapter rings supplied to accept a variety of shaft sizes.

Nylon Spinner w/ Accessories
Adapter rings supplied to accept a variety of shaft sizes.

Nylon Spinner w/ Accessories
Adapter rings supplied to accept a variety of shaft sizes.

Nylon Spinner w/ Accessories
Adapter rings supplied to accept a variety of shaft sizes.

Spinner for folding Prop (Small)
Collet style, will fit 2.3~2.5mm motor shafts
Prop shaft bolt is 5mm
Requires a propeller to suit 5mm shafts.
Weight: 9g
Diameter: 31mm

Very well formed, light weight and firm, foam wheels.

Control Arms 43x13x24x3mm (5pcs/bag)

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

This set of props are self-locking and have an insert fitted to suit 5mm motor shafts.

Specs:
Length: 5inch
Pitch: 3 inch
Center Hole:5mm
Weight:  5.3g each
Rotation: Clockwise and counterclockwise

The MultiStar White edition multirotor propeller started as an optimized blade design for the target motor/RPM combinations in Multirotor use. After comparing a host of construction options, a wood core was selected for its super stiff property’s, light weight and vibration resistant properties.

The MultiStar White Edition Propellers come packaged in a set of two CW/CCW and matching mounting hardware and thrust washers. The high visibility White color adds safety and style to your multi-rotor setup.

Specs:
Size: 9.4X4.3
Mounting Style: Hub Style with CW/CCW shaft nuts included 

Included:
One CCW and one CW propeller
Mounting Hardware and thrust washer (DJI Style shaft nuts)

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

Possibly one of the hottest debates in recent R/C history...balsa or foam? This is the shirt all of you balsa bandits have been waiting for. Slap your foamy friends across the face and tell them to read this.

Size: Large

*Note: Other sizes available

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug

Spice up your Turnigy ActionCAm with these high quality original replacement faceplates in a wide variety of colors. Swapping out these faceplates is a breeze, simply pop off the original and snap on the new. With these optional faceplates you can easily make your Turnigy ActionCam match your favorite color, your model or even your outfit!

Spec.:
Color: Bronze

TrackStar Shock End Caps 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100

TrackStar Suspension Spring Retainer 12mm (4)

Compatible with the following Shock Absorbers
S12400, S160023, S160026, S160085, S160100