Bargain Bin

A replacement pair of vertical stabilizers for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement landing gear set with nose, and main gear legs with wheels for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement set of landing gear with wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement nose, and main wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

A replacement gun pod for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement horizontal stabilizer rotating actuating shaft for the XFLY Alpha Jet.

A replacement set of wheels for the 750mm XFLY T-7A Red Hawk (3pcs).

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement elevator/horizontal stabilizer actuating shafts for the 975mm XFLY T-7A Red Hawk (2pc).

A replacement pair of winglets for the green/white XFLY Eagle Twin 40mm EDF Flying Wing Racing Jet.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of nose and main wheels for the 750mm XFLY Sukhoi Su-27 Flanker.

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

This is an all laser cut ply cockpit that has an integrated Pan and Tilt system and mounts for a complete FPV system. The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

Features:
• Lasercut pre-built construction
• Can be adapted to other planes
• 2 mounting positions for the Quick release pan and tilt
• Mounting provisions for a full FPV system

Specs:
Weight: 78g
Size: 98x96x221mm WxHxL
Fitment: Direct fit for the Hawkeye 1700 PC FPV plane (can be adapted to others)

Required:
2 x 9g servos, recommend 180deg and Metal Gear.

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: MEDIUM

*Note: Other sizes available

A strong, waterproof case for your Xiaoyi action camera with access to all camera funtions and an adjustable universal quick release mount.

Specs:
Weight: 74g