This is a replacement pre-painted canopy for the H-King Avro Lancaster V3 "Dumbo". It is also suitable for earlier versions of the H-King Lancaster, but the color may differ slightly.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

A replacement pair of horizontal stabilizers with elevators for the H-King F-16 Fighting Falcon 550mm.

A replacement vertical stabilizer with factory-applied decals for the H-King F-16 Fighting Falcon 550mm.

A replacement carbon wing spar for the H-King F-16 Fighting Falcon 550mm.

A replacement carbon wing spar for the H-King F-18 Hornet 588mm.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

A replacement wing with factory-applied decals for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement vertical stabilizer with rudder, and factory-applied decals for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement pair of plastic wing joiners for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement main carbon wing joiner, and rear wing support for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

A replacement main wing for the H-King Mini L-39 Albatros 64mm. Please note that the wing tanks are not supplied with the wing.

A replacement fuselage w/access hatch for the H-King Mini L-39 Albatros 64mm.

A replacement Horizontal and Vertical Stab for the H-King Mini L-39 Albatros 64mm.

A replacement canopy/battery hatch for the H-King Mini L-39 Albatros 64mm.

A replacement pair of tip tanks for the H-King Mini L-39 Albatros 64mm.

A replacement 64mm EDF with a 2220-3300KV brushless outrunner motor for the H-King Mini L-39 Albatros 64mm.

A replacement head button for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

The SonicModell AR Wing PRO "White Falcon" is a special, all-white version of the popular standard AR Wing PRO. It is still a tough, dynamic, efficient, lifting-body flying wing that delivers an impressive performance with style. The White Falcon features detachable wings, so there is no glue required, which means the wings can be easily removed for transport. Other features are a large battery/flight controller bay, a nose camera bay for FPV flying that suits DJI and other cameras, and numerous compartments for the FPV transmitter (plenty of room for long-range systems) and your RC receiver, etc. These compartments have aerodynamically designed NACA air cooling systems to keep everything including your FPV gear nice and cool.

The SonicModell AR Wing PRO "White Falcon" is a special, all-white version of the popular standard AR Wing PRO. It is still a tough, dynamic, efficient, lifting-body flying wing that delivers an impressive performance with style. The White Falcon features detachable wings, so there is no glue required, and the elevon servo connections are made automatically, which means the wings can be easily removed for transport. Other features are a large battery/flight controller bay, a nose camera bay for FPV flying that suits DJI and other cameras, and numerous compartments for the FPV transmitter (plenty of room for long-range systems) and your RC receiver, etc. These compartments have aerodynamically designed NACA air cooling systems to keep everything including your FPV gear nice and cool.

The SonicModell AR Wing Classic offers incredible performance with versatility. It features detachable wings, and wing tips that allow them to be easily removed for transport. It also has a spacious equipment bay, plus a couple of smaller bays, so there is plenty of room for your batteries, radio gear, and a variety of FPV equipment.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

A replacement fuselage for the Durafly Carbon Arcus F3A aerobatic biplane, please note the decals are not included.

A replacement horizontal stabilizer with joining spar for the Durafly Carbon Arcus F3A aerobatic biplane, please note the decals are not included.

A replacement battery hatch for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement motor cowl for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement tailwheel assembly for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement prop adapter for the Durafly Carbon Arcus F3A aerobatic biplane.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.