Aircraft

Turnigy 14x4.7 Slowfly Propeller Pusher Black (2pcs).

45mm Pocket-Quad Prop CCW (From Rear) - Green (5pc)

Suitable for 1mm shaft

The Turnigy 8045 propellers were made specifically for Multi-Rotor use. They are a direct replacement for the DJI Phantom and Walkera QR X350. They are utilizing a slot (DJI) style hub for proper centering and non-slip engagement. The Turnigy line of props come in CW and matched CCW rotations and Black or White coloring. The center hubs are beefed up, to alleviate the problem other props have of splitting hubs and tossing blades! They also have a thicker cross-section to minimize flexing and increase their durability. The 8045’s precision molding will allow these props to require very little to no balancing.

Specs:
Size: 8-4.5
Rotation: Standard
Hub: slot (DJI) style, 8mm bottom DIA 7mm flat to flat and drop down to 6mm top hole
Color: Black

Included:
Four standard rotation props

The Turnigy 8045 propellers were made specifically for Multi-Rotor use. They are a direct replacement for the DJI Phantom and Walkera QR X350. They are utilizing a slot (DJI) style hub for proper centering and non-slip engagement. The Turnigy line of props come in CW and matched CCW rotations and Black or White coloring. The center hubs are beefed up, to alleviate the problem other props have of splitting hubs and tossing blades! They also have a thicker cross-section to minimize flexing and increase their durability. The 8045’s precision molding will allow these props to require very little to no balancing.

Specs:
Size: 8-4.5
Rotation: CW
Hub: slot (DJI) style, 8mm bottom DIA 7mm flat to flat and drop down to 6mm top hole
Color: Black

Included:
Four clockwise rotation props

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor project. Includes adaptors.

Specs:
Diameter: 10 inch
Pitch: 5 inch
Weight: 8.9g
Rotation: Standard
Color: Black

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor projects and twin engined models. Includes adaptors.

Made of nylon, this E-Prop is lightweight and durable. Available in both rotations, it is perfect for your multi-rotor project. Includes adaptors.

Specs:
Diameter: 10 inch
Pitch: 5 inch
Weight: 8.9g
Rotation: CCW
Color: Green

Made of nylon, these E-Props are lightweight and durable. Available in both rotations, they are perfect for your twin-motor aircraft or drones, includes adaptors.

Anyone that flies the small 250 class quads has gone through a few props, whether you're trying to fit through something or had an acro mishap.  These prop guards will adapt to most 250 class frames via the motor mounting bolts. The guards will not only help save your props but help protect others and property from the high speed 5 inch props. 

Features:
• Adaptable to most frames
• Light weight and durable G10
• Protects your props and property 

Specs:
Size: For 5 inch props
Weight: 4.5g each
Mounting: Via motor mounting 12,16,19mm

These are clear versions on the popular 5x3 propeller for mini quad, the clear plastic catches the light from LED illumination to create a glowing disk in the sky great for night flying. The clear plastic is extremely durable and even stronger than some colored variants. 

Features:
• Clear frosted designed for LED night illumination
• Extremely durable material
• Standardized 5mm mounting for a direct replacement

Specs:
Size: 5x3 or 5030
Hub: 5mm
rotation: CW/CCW 

Included:
2 x CW rotation
2 X CCW rotation

Ghost 6030 Orange Propellers For Night Flying LED Illumination Set Of 4 (CW/CCW)

Specs:
Material: Nylon
Size: 6 x 3
Qty: 4pc (2 x CW 2 x CCW)
Color: Orange

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Green
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 4 x 4.5 (CW/CCW) (Black) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 4 x 4.5
Color: Black
Hub: 5mm
Weight: 3.4g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: Orange
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 5 x 4.5 (CW/CCW) (White) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 4.5
Color: White
Hub: 5mm
Weight: 3.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Green
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone Bull Nose Plastic Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs) 

Diatone are now putting out these great bull nose propellers. Giving you better control of your multi rotor with more resillience to breakage.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Color: Orange
Hub: 5mm
Weight: 5.8g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 5030 Plastic Self Tightening Propellers 5 x 3 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 5 x 3
Thread: 5mm
Color: Green
Weight: 3.0g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Green) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Green
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Black) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Black
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Red) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Red
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Diatone 6045 Plastic Self Tightening Propellers 6 x 4.5 (CW/CCW) (Orange) (2 Pairs)

These Diatone propellers are the next step forward. Easy to install self-tightening propellers. You just need clockwise and anticlockwise threaded hubs on your motors for these easy to use propellers.

They come packaged as a set of four, with two CW rotation and two CCW rotation.

There is a wide range of color options that can be mixed and matched to help with multirotor orientation. This is the perfect upgrade for any small multirotor.

Specs:
Size: 6 x 4.5
Thread: 5mm
Color: Orange
Weight: 5.1g each

Included:
2 x CW rotation propellers
2 x CCW rotation propellers

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 610
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.

As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.

Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

Durafly™ EFX Racer - Replacement Fuselage (Yellow)

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

Durafly™ EFX Racer - Replacement Battery Hatch (Yellow)

Durafly™ EFX Racer - Replacement Horizontal Stabilizer

Durafly™ EFX Racer - Replacement Cowl (Yellow)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

Avios Yakovlev Yak-52 HobbyKing Scheme Replacement Canopy.