Aircraft
-
Super Fast FlyCat 56mm EDF Jet (KIT)$27.04This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!
The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.
This plane is extremely fast, (over 100mph!), however still stable at slow flight.
Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitterOur flight report.
Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.
We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.
EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.
First flight.
We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.
The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!
Overall an excellent plane which flys smoothly, even on windy days.
We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.
Learn More -
P-51D Shangri La - Replacement Horizontal Tail$15.17P-51D Shangri La - Replacement Horizontal Tail
Learn More -
HobbyKing Helicopter Pitch Gauge Kit$6.26The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!
Learn More
Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm
Note: An assembly guide can be found in the FILES tab below. -
3-Blade Prop Set 10x7 B-17P - Bushmule - Skymule (Std & Reverser Rotation)$21.97Prop Set for B-17 Memphis Belle 1875mm, 2 x Std Rotation, 2 x Reverse Rotation.
10x7 3 blade props suitable for many models.
Learn More -
-
-
-
FPV Tilt Camera Mount with Landing Gear$21.99The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.Spec:Height: 185mm (to mounting plate)
Skid width: 190mm
Skid length: 290mm
Camera mount area width: 110mm
Camera mount area height: 100mm
Dry Weight: 188g (not including servo)Material: Fibre Glass
Required:1 x 9g ServoLearn More -
Canopy Cover - T-Rex 600EX (Red)Special Price $2.00 Regular Price $6.43Protect your canopy from scratches with a HobbyKing canopy cover. These canopy covers are made from a soft felt material and will keep your canopy looking its best.
Learn More
Suits: T-Rex 600EX
Color: Red -
-
HK-450 Glowing Tail and Light Set (Align part # HS1275)$4.06Night flying has never been more fun!
The HK-450 glow set includes flybar paddles, tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.Included.
HK-450 Flybar paddles.
HK-450 tail rotors.
HK-450 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # HS1275)Learn More -
HK-500 Glowing Tail and Light Set (Align part # H50031).$4.06Learn MoreNight flying has never been more fun!
The HK-500 glow set includes tail rotor and tail fins plus a resistored UV LED set that handles up to 13v! Perfect for 3S setups.
Installation is simple, just replace the standard flybar paddles, tail rotors and fins with our glow versions then install the UV LED to point towards whichever part you want to glow the brightest.
The UV-LED excites the luminescence material in the polymer causing it to glow brightly.
Included.
HK-500 tail rotors.
HK-500 Tail fins.
80cm two wire lead (Pre-soldered)
Resistor (Pre-soldered)
High Power Directional UV-LED (Pre-soldered)(Similar Align part # H50031) -
Durafly Me-163 950mm - Replacement Propeller (2pc) 6x4$2.00Durafly Me-163 950mm - Replacement Propeller (2pc) 6x4.
Learn More -
Replacement Propeller Blade Set for Durafly Curtiss P-40N Warhawk.$5.31Replacement propeller blade set for Durafly Curtiss P-40N Warhawk.
Learn More -
Durafly™ Micro Series - Replacement Motor MountSpecial Price $0.90 Regular Price $1.15Durafly® ™ Micro Series - Replacement Motor Mount
Learn More -
Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)$11.62Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)
Learn More -
-
Super Kinetic - Replacement Folding Prop Blades (1pair)Special Price $2.50 Regular Price $3.09Super Kinetic - Replacement Folding Prop Blades (1pair)
Learn More -
-
-
Super Kinetic - Replacement Control Wire - Steel (With Ball Link)$3.10Super Kinetic - Replacement Control Wire - Steel (With Ball Link)
Learn More -
Super Kinetic - Replacement Brushless Motor (2630-KV1000)$18.60Super Kinetic - Replacement Brushless Motor (2630-KV1000)
Learn More -
Super Kinetic - Replacement Decals (2pcs/set)$11.56Super Kinetic - Replacement Decals (2pcs/set)
Learn More -
AVIOS BushMule Sports/STOL Airplane 1500mm Optional Ski Set (3pcs)$12.99AVIOS BushMule Twin-Motor Sports/STOL Airplane 1500mm Optional Ski Set (3pcs).
Please note: With small modifications, this ski set is suitable for other models such as the Durafly Slow Poke, etc.
Learn More -
Durafly™ SkyMule 1500mm - Bottom Servo Hatch$2.67Durafly™ SkyMule 1500mm - Bottom Servo Hatch
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set$3.81HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear$4.89HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel$3.87HobbyKing® Bix3 Trainer 1550mm - Replacement Tail Wheel
Learn More -
-
HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv$18.44HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set$3.87HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter$3.55HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter
Learn More -
HobbyKing™ Wingnetic 805mm - Replacement FuselageSpecial Price $17.26 Regular Price $19.99HobbyKing™ Wingnetic 805mm - Replacement Fuselage
Learn More
Login and Registration Form