Aircraft

P-51D Shangri La - Replacement Horizontal Tail

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch. 

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

Durafly® ™ Messerschmitt Bf.110 - Replacement Radiator Set (1pair)

Durafly™ Spitfire Mk24 - 5-Blade Hub Set

Spare Part - Cowl for Spitfire Mk5 Desert Scheme version

Durafly™ T-28 Trojan 1100mm V2 - Horizontal Tail

Durafly™ T-28 Trojan 1100mm V2 - Canopy inc FPV Pilot Tray.

Please note: This canopy will also fit the Durafly T-28 Trojan Naval Aviation Centennial Edition, but of course the color scheme is different.

Durafly™ T-28 Trojan 1100mm V2 - Control and Mounting Accessories

Durafly™ T-28 Trojan 1100mm V2 - Propeller Shaft and Spinner Nut

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

Spare Part - Cannon Blisters for Spitfire Mk5 ETO scheme (Green/Grey)

Spare Part - Fuselage for Spitfire Mk5 Desert Scheme

Painted with all the plastic parts and magnets (cowl NOT included)

Spare Part - Cannon Blisters for Spitfire Mk5 desert scheme

Hobbyking 1875mm B-17 F/G Flying Fortress (V2)(Olive  )- Replacement Vertical Stabilizer

This H-King version of this very impressive F-18 Super Hornet is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-18 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Olive) - Replacement Nose Glazing

Hobbyking 1875mm B-17 F/G Flying Fortress (V2)(Olive)- Replacement canopy/battery hatch.

The Durafly Gloster Gladiator is manufactured in strong EPO foam, to the usual high standards you have come to expect from this range of RC airplanes. As with most other Durafly models, it comes "Plug N Fly". This means it is supplied with an easy-to-assemble airframe, powerful pre-installed 3719-770KV brushless motor, Aerostar 40A ESC, and 4 pre-installed 9g digital servos. A vinyl decal sheet is included, these will need to be applied during the building process, this gives you the choice of using the silver finish as a base for creating your own color scheme. Once the model is assembled, all you require is your choice of 4ch or more receiver and a 2200mAh 4S (14.8V) LiPo battery.

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

This version of the Vampire DH100 is finished in a Royal Canadian Air Force (RCAF) color scheme, this scheme was selected for its history and its orientation when flying. The RCAF obtained their Vampires in late 1948, and being their Air Force's first-ever jet fighter, they were an instant hit with the RCAF aircrew and pilots. The Vampire had an outstanding performance and graceful lines, this Durafly version captures these attributes beautifully.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement fuselage 1350mm (53.33in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Main Wing 1875mm(72.25in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Horizontal Tailplane

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Vertical Stabilizer

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement canopy / battery hatch.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

The Return of the “Stubby” Legend – Rediscover the Pure Joy of Flight

What makes a classic RC warbird stay relevant? It’s the ability to deliver maximum fun with minimum effort. The Durafly Brewster F2A Buffalo V2 920mm RC plane returns as the ultimate “grab-and-go” park-size warbird, combining authentic scale looks with modern Plug-N-Fly convenience.

The Durafly Me-163B has been designed for pilots with some experience, it benefits from an incredible flight performance, great stability throughout its speed range, and like the real thing, it is incredibly fast. Aerobatics including huge loops, vertical rolls out of sight, and very fast low passes are easily achievable, yet slow it down and it's very stable, with no hint of a stall. Using the recommended 2200mah 30-65C 4S LiPo battery and the supplied 6x4 prop, you can expect flight times well beyond 5 minutes and an abundance of power. If you love speed and very fast models, then this one is for you, the Komet Me-163 is ballistic, with speeds approaching 100mph.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

Avios has excelled yet again in bringing you another interesting and high-quality RC model, the Avios PBY Catalina. Avios are at the forefront of water plane technology; they have produced more types than any other manufacturer in this class of model. The Avios model captures the looks and great flying characteristics of the full-size plane with this stand-off scale model of the iconic World War II flying boat. The Catalina was one of the most widely used flying boats of the 2nd World War. It served with every branch of the United States Armed Forces, and the Avios version depicts a Catalina in the stunning US Coast Guard scheme of the early 1940s era.

This striking version of the Durafly T-28 Trojan comes in a unique color scheme for the Naval Aviation Centennial (1911-2011) (US Navy). The Durafly T-28 is an impressive RC plane to fly and even has the ability to be upgraded for the extreme challenge of FPV flying.

XFLY is continuing to expand its incredible range of EDF models with this fantastic-looking Lockheed Martin F-22 Raptor. It is a small, scale twin-EDF model of the supersonic all-weather stealth fighter that was developed for the United States Air Force. The US Air Force requirement was for an advanced tactical fighter to replace the F-15 Eagle and the F-16 Fighting Falcon that had the capability of competing with the Su-27 Flanker, and MiG-29 Fulcrum.

The B-17 Flying Fortress remains one of the most famous allied bombers of WW2.  Although it served in every theatre of the war, it was in the European Theatre of Operations (ETO) with the renowned 8th Air Force in particular, that this sturdy and well-armed heavy bomber flew its way into the history books.

Building on the success of our original HobbyKing "Memphis Belle" model we have redesigned this huge 1875mm wingspan warbird and now bring to you the best flying and best-looking rendition of this iconic heavy bomber available anywhere in this size. 

Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed.  It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.

The pre-fitted electric scale wheels retract forward like the real aircraft and are large enough to tackle almost any surface.  There is also plenty of power on tap from the four upgraded 850kv brushless motors. Counter-rotating props make zero torque, smooth take off's, the order of the day and with pre-fitted split flaps, landings are also stress-free.

But it's the attention to detail on this version that is impressive.  Panel lines have been reduced and two new accurate scale color schemes are now available.  Olive drab/grey and overall silver. These two schemes represent the vast majority of B17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant. 

As a Flying Fortress, our model also bristles with guns, with top and ball turrets as well as tail, nose, and waist gun positions.  Dummy Wright Cyclone engines are finished with three-blade counter-rotating scale props and hubs and finally, working navigation & landing lights add to the overall realism level of this impressive model.

Beneath the surface, our B-17 has been beefed up with additional wing bracing and of course, she has been test flown extensively and it's in the air that this model really comes into its own.

You will be struck at how easy it is to fly, almost like a powered glider at times and even though it's more than capable of performing non-scale aerobatics including loops and rolls, it is at slower speeds that it looks every bit the heavy bomber.

With its impressive wingspan, low passes translate into a real presence in the air and the sound of those four props driving it forward just adds to the experience.

Our B-17 is a scale pilot's dream model. It's a big airplane that looks great, flies beautifully, and definitely has the "wow" factor that will have heads turning wherever and whenever you fly it.

The Supermarine Spitfire is the most famous fighter plane from the Second World War, and the Mk.1a defines where its history started. This Avios model represents an early WW2 version that came out just before the "Battle of Britain". It looks stunning and is possibly the best-looking and best-flying foam Spitfire on the market today. At this point, we would like to give thanks to Tom Hunt, whose drawings the Avios Spitfire Mk.1a is based on, and it is one of the main reasons why this Avios Spitfire (just like its smaller brother from Durafly) flies so well.. The Mk.1a has that truly iconic shape and lines of the Supermarine Spitfire as it was seen through the eyes of its original designer, R.J. Mitchell. The upper surfaces have a brand new, authentic early WW2 camouflage color scheme, with a black and white scheme underneath. This scheme was used from 1938 and during the "Phony War" on RAF fighters to help the observation of friendly aircraft from the ground. The Avios Spitfire Mk.1a is a poignant and fitting tribute to the pilots who flew them during these early years of aerial combat.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.