Accessories

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

Brass Linkage Stopper For 1mm Pushrods.

Specs:
Material: Brass
Weight: 7.31g (Qty 10)

Brass Linkage Stopper For 1.2mm Pushrods.

Specs:
Material: Brass
Weight: 7.63g (Qty 10)

Brass Linkage Stopper For 2mm Pushrods.

Specs:
Material: Brass
Weight: 10.17g (Qty 10)

Brass Linkage Stopper For 3mm Pushrods.

Specs:
Material: Brass
Weight: 9.63g (Qty 10)

A lightweight, highly adaptable model aircraft stand, ideal for building, field assembly and storage of all but the largest of models (We've used these for models up to 2m long without any problems.)

The interlocking, all foam stand assembles in seconds, is flexible, strong and will not leave marks on your model.

Specs:
Length: 580mm
Width: 300mm
Height: 355mm
Weight: 530g

Spinner suits motors with a 3mm shaft.
Diameter is 40mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 21g

Spinner suits motors with a 5mm shaft.
Diameter is 45mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 33g

Spinner suits motors with a 5mm shaft.
Diameter is 56mm
Lightweight spinner uses a hex-bolt to hold cone in place and lightweight alloy extruded and machined.
Weight: 63g

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g.

UltraDetail Scale Cockpit - Viperjet 90.

Specs:
Width: 105mm
Length: 353mm
Heigth: 70mm

Losi Mini Plug Pigtail - Battery (2pcs/bag)

7cm wire with pre-tinned ends.

Excellent W.S. Deans T-connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

Hobbyking will begin to include the XT60 on all batteries up to 3,000mAh in capacity in the near future!

XT60, Designed by hexTronik to be more reliable and a better quality connection than Deans T-Connectors.

There is no patent on the XT60 connector, we hope this product is sold everywhere in the world and dominates the market, reducing customers dependency on the over-priced Deans T-connector.

Say 'No' to the Deans Connector profiteers, and use XT-60's!

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

Genuine Nylon high-temp XT60 connectors.
XT = heXTronik
60 = 60A constant
We're the guys that designed this plug!

Alloy Prop Saver & Adapter w/ Band
Weight: 2.5g

Please select below for your size;
Available: 2.3mm

These spoilers are a dream come true for those looking for an easy to install and set-up spoiler system for larger scale gliders.

They are single sided scissor action spoilers just like the full scale versions.
These fit flush to the wings surface when closed and proportionally open to their fully deployed height.

The working 'blade' length is 255mm and stands 20mm above the wing skin fully deployed.

Features:
• Alloy Construction
• Scale Scissor action
• Plug and Play electronics
• Open and Close limit switches

Spec:
Voltage: 5-6v
Overall length: 300mm
Installation Depth: 10mm
Height Deployed: 20mm
Plug: JR Style
Weight: 40g each

Note: This is a kit consists of 1 x left and 1 X right spoiler.

Servoless Steerable Nose Retract for small models with 32mm x 25mm mount 90 Degree - Features Auto Cut Off and pre-installed 3mm Oleo Mounting Pin.
 

This servoless steerable nose retract features a metal trunion and a 44mm x 41mm mounting plate. It's designed for models weighing up to 5kg. It includes a pre-installed 5mm pin and steering assembly.

Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Screw Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 77g

Servoless Retract with metal trunion with 44mm x 41mm Mount (2pcs) 90 Degree - Features Auto Cut Off and pre-installed 5mm Oleo Mounting Pin.
 
Specs:
Operating Voltage: 4.5~6.0V
Supported Model Weight: up to 5kg
Mount Plate Dimensions: 44mm x 41mm
Scew Hole Spacing: 36mm x 33mm
Depth: 28mm
Length: 74mm
Pin: 5mm
Weight: 72g each

Full Metal Servoless Retract for large models (10~12kg). Features all metal construction for precision, reliability and durability. This makes for an excellent, reliable alternative to air & mechanical operated retract systems on larger models!
 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 4.0inch 

The wheels has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.5inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.75 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 2.0inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 57mm (2.25inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 64mm (2.5inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 70mm (2.75inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

76mm (3.0inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 83mm (3.25inch) 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 95mm (3.75inch)

Ball and roller link.
Rod end diameter: 3.9mm
Link hole diameter: 2mm
Length: 16mm

This is a great way to avoid power shorts.
Rated to around 120A

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!
 
Easier to solder and a stronger connection than Deans T-plugs

EC2 Male - ESC Connector (5pcs/bag)

EC2 Female & Male (5pcs/bag)