Accessories

Turnigy Scale Jet Alloy Wheel w/Rubber Tire (45mm) - Superbly made alloy wheel with a high quality, hard wearing scale rubber tire.

Specs:
Diameter: 45mm (tire diameter)
Width: 8mm (tire width)
Axle: 3mm
Weight: 17g

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

Turnigy Electric Magnetic Brake System - Replacement Controller

Spec Controller:
Operating Voltage: 12v~40v (3s~10s)
Output Voltage: 2A/0v~12v
Dimensions: 55mm x 7mm x 26mm
Weight: 15g

Lt Col Bird - Promoted to the 90mm Jet Class, our favourite jet pilot is as gung-ho as ever making him the perfect choice for your new jet!

Nylon Clevis 2x29 (10pcs)

30mm Aluminum spinner prop nut 3/8"-24

Prop Nut/Spinner 22mm Alloy 5/16"-24

Prop Nut/Spinner 22mm Alloy 3/8"-24

Prop Nut/Spinner 22mm Alloy M10x1.00 Anodised Black

Prop Nut/Spinner 22mm Alloy M7x1.00 Anodised Red

22mm Alloy Prop Nut/Spinner Suites 10mm Thread (Anodised Red)

Height:20mm
Width:22mm
Thread Size:10mm
Thread Depth:20mm

Hex spinner prop nut Alloy M7x1.0

Hex spinner prop nut Alloy M8x1.0

Hex spinner prop nut Alloy M10x1.00

Hex spinner prop nut Alloy 5/16"-24

Brass Nut for Spinners M8x1.25-M4

Pull-pull/3mm Clevise Quick Link Couplers - 26mm Length

Ultra Light Rubber PU Scale Wheel 2.75"/70mm

Specs:
Width: 26.5mm
Weight: 13g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.00"/76.2mm 

Specs:
Width: 26.5mm
Weight: 18g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.5"/89mm

Specs:
Width: 31mm
Weight: 24g
Axle: 5mm

Molex 2.0 2Pin Cable Male Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Cable Female Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Female and Male Connectors (Plug and Crimp) (5sets)

Specs:
Connector: Molex 2.0 2pin Male and Female With Pins

JST-SH 3Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 3
Pin Spacing: 1mm
Socket Size: 5.5x4.5x3.1mm

JST-SH 5Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 5
Pin Spacing: 1mm
Socket Size: 7.5x4.5x3.1mm

JST-SH 6Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 6
Pin Spacing: 1mm
Socket Size: 8.5x4.5x3.1mm

JST-SH 8Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 8
Pin Spacing: 1mm
Socket Size: 10.5x4.5x3.1mm

Constructed from tough carbon fiber these high-quality spinners are perfect for those looking for an amazing finish to their model aircraft.  

Deliberately left "blank" so that they can be modified by you to suit any number propeller blade configuration and they have a single bolt mounting recess in the nose of the spinner to enable that mounting option to be used.

These spinners have been made available for builders of model aircraft and are amongst the best carbon fiber composite types available.   Strong and beautifully finished in high gloss red or orange they look fantastic and will last.

For scale enthusiasts the conical profile of these spinners is very close to that used on PC9's, PC21's, Cessna 140's etc but would certainly be perfect for any sport/scale aircraft to give your model that wow factor finish.

Specs:
Diameter: 2.5"
Length: 3.5"
Weight: 29g

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

KingKong Self-tightening Prop Adapters (CW/CCW) (2 pairs)

These are designed for KingKong propellers and have two lugs on the bottom side.

Includes:
2 x Self-tightening Prop Adapters (CW)
2 x Self-tightening Prop Adapters (CCW)