Workbench

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 13 inches
Pitch:  6 inches
Center Hole: 6mm
Hub Width: 14mm
Weight: 35g

Aerostar products are renowned for their excellent high quality airplane components. Their accessory line is further enhanced with this series of laminated cherry wood propellers designed primarily for gas engine applications. However as the power of brushless motors continues to grow the demands on the propellers you use gets greater and greater so these propellers would also be excellent on these higher powered electric motors.

These high quality laminated cherry wood propellers are precision machined for efficiency and almost perfect balance straight out of the package. Pre-drilled with a slightly under size propeller shaft hole, this allows you to ream to the exact diameter of your gas engine crankshaft. For added safety and good looks we have painted the tips of each propeller red so that you can see the prop arc when your engine is running. Each propeller is finally finished with super tough lacquer that seals the wood to provide years of use.

Aerostar offers a wide range of sizes and pitch combinations of these propellers to suit most airplanes from parkflyers all the way up to giant scale airplanes.

Features:
• High quality lacquered finish with red painted tips for durability and high visibility
• Precision machined for optimal performance and balance
• For gas and heavy duty electric applications
• Center hole pre-drilled

Specs:
Diameter: 14 inches
Pitch:  8 inches
Center Hole: 8mm
Hub Width: 17mm
Weight: 44g

The ever popular Turnigy Watt Meter just got an upgrade

There is no better or easier way for you to measure your power system than by using a watt meter. This handy little device takes the guess work out of it by reliably and accurately measuring watts amps and volts. 

If a watt meter saves you just one motor or ESC then its paid for itself. We've all seen someone burn a motor or ESC at the track/field with a new prop or pinon. You can avoid the disappointment of a failed power system by ensuring your setup is within the limits of the componentry   

Advantages:
Ensure peak currents are within tolerance for your power system
Check battery health and performance.
Evaluate R/C battery charging efficiency.  
Choose the best propeller or gearing and the most efficient motor  
Check for wiring and connector power losses  
Measure power and energy consumption of any device with a battery
Specs:
Operating voltage: 0v~60V (0V Requires external battery)
Operating voltage: 4.6~60V 

Measures:
0~180A - Resolution 0.01A
0~60V - Resolution 0.01V
0~10800W - Resolution 0.1W
0~99Ah - Resolution 0.001Ah
0~9999.9Wh - Resolution 0.1Wh
Screen: 16x2, backlit LCD display
Size: 85 x 42 x 25mm
Weight: 82g

Alloy Clevis for Non Threaded 2mm Control Rod

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

3.5mm Gold connectors.
Rated to around 80A

Package contains 10 PAIRS (20PC) of connectors.

2mm Gold connectors.

Package contains 10 PAIRS of connectors. (20pc)

4mm Gold connectors.

Package contains 10 PAIRS of connectors.

Aerostar Composite Propeller 10x5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 11x5.5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 13x4 Bone (CCW) (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 14x7 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 8x4 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

Pulse / Heart Rate Sensor Module for Arduino

Specs:
Dimensions: 15 x 2mm
Weight: 2.66g

Omni-directional wheels are useful as they roll freely in multiple directions on the rollers mounted around their circumference. They are great for use with skid steering robots as they allow for a change in direction while maintaining the original orientation.

This single layer omni-wheel is constructed from low friction Polyoxymethylene (POM) and reinforced nylon.

Features:
• Tough Polyoxymethylene (POM) and reinforced nylon construction
• Maintenance free
• Circular mounting hole

Specs:
Diameter: 40mm
Height: 15mm
Center hole: 8mm Circular
Static load: 8kg
Dynamic load: 10kg
Weight: 15g

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.

You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.

This model is activated by light sensor and will respond to a flashlight or other direct light source.

Includes:
1 x Light controlled robot car kit 

Note: This robot does not require programming.

One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.

You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.

This model is an obstacle avoider, with a sensor that detects objects to its front. 

Includes:
1 x Obstacle avoiding robot car kit 

Note: This robot does not require programming.

Make use of that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this versatile charging unit.

Simply connect it up to your wind turbine and it can be used to charge your mobile phone, your ipod or your rechargable batteries. 

Includes:
Ek5400 Charger
Leads and cables

Make light and music with that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this melody and light board.

Simply connect it up to your wind turbine and it can be used to power the sound and light board in various modes.

Includes:
Ek5300 Board
Instructions

Soldering Iron Tip Set (10 pcs)

Suits Hakko type soldering irons that have an attachment spigot diameter of 4mm. Containing fine tips to bevel edges, this pack has you covered for the majority of hobby projects from PCB soldering to battery connectors. 

The brain of your robot or IoT device, the EZ-B V4 powers over 10,000 robots worldwide and will give your robot project features inspired by science fiction!

With the electronics protected by a stylish plastic shell, the ez-bv4 clips into your ezrobot Revolution chassis or custom robot. It is easily controlled over Wi-Fi using ez-builder software.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

The Turnigy Electrical Switch is a rugged solid state switch that has no contacts to fail like traditional mechanical switches. It can work on 4~8 NiMh/NiCD cells or a 2S 7.4V Lipoly battery. It features a Lipo mode which offers low voltage protection to the battery should the pack dip below 6.0V. A LED voltage indicator gives you at a glance status of your receiver so you always know how much of your pack is left. The plastic case has two tabs molded in allow you to mount it easily to your airframe for nice clean installations.

Features:
• Momentary on/off switch
• Screw mounting tabs
• Connectors work with JR/Futaba type servo plugs
• LED voltage indicator
• Lipo mode has voltage cutoff to protect lipoly batteries from over-discharge

Specs:
Input Voltage: 4.8~10V (2S Lipoly, or 4~8 cell NiMh/NiCD)
Continuous Current: 8A
Max Burst Current: 14A (10 sec)
Size: 43x33x9mm
Weight: 9g
Connectors: Futaba (Works with JR)

Sonic 64 EDF Wing 1230mm - Replacement EDF w/ Motor

Spec
Motor: 5000kv
Fan Unit: 64mm
Voltage: 11.1v Lipoly Battery
ESC Required: 40amp 

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs:
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Specs:
Maximum throughput : 10A / 30v
Weight: 7g

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.