Workbench

Carbon Fiber Tail wheel set 26cc~30cc

Size:
Length:118mm
Width:14.0mm
Thickness:2.6mm 

Carbon Fiber Tail wheel set 85cc-100cc        

Size:
Length:190mm
Width:18.2mm
Thickness:3.5mm

Model JET Pilot 1/6 (Green) (H80 x W68 x D37mm)

Made with what seems to be a flexible rubber or plastic.
Well detailed and nicely painted.
A good addition to any plane.

Specs
Heigth: 80mm
Width: 68mm
Depth: 37mm
Weight: 29g

Ultra Light Parkfly Pilot (Green) (H30 x W37 x D18mm) - Perfect for even the lightest parkfly model!

Specs
Height: 30mm
Width: 37mm
Depth: 18mm
Weight: 2g

Ultra Light Parkfly Pilot (Red) (H30 x W37 x D19mm) - Perfect for even the lightest parkfly model!

Specs
Height: 30mm
Width: 37mm
Depth: 19mm
Weight: 2g

Parkfly Classic Era Pilot (Red) (H37 x W40 x D22mm)

Specs
Height: 37mm
Width: 40mm
Depth: 22mm
Weight: 6g

Parkfly Luftwaffe Pilot (H38 x W39 x D23mm)

Specs
Height: 38mm
Width: 39mm
Depth: 23mm
Weight: 7g

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 26 x 16 x 8mm + 15mm pin length 
Material: Aluminum

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions: 23.5 x 13 x 8mm + 8mm pin length
Material: Plastic / Steel

This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put!

Specs:
Dimensions:  26x16x10mm + 10mm pin Length
Material: Plastic / brass

These are used to help route cables and hoses within your models. These anchors are self adhesive and allow you to pass a cable tie through the anchor, then around the cable or hose you wish to hold in position.

Handy for use in both your models and the workshop!

Dimensions: 25 x 25mm 

Metal Push Rods M2xL550 with one-end threaded

Nylon Ball Joint M3 x 24mm x 3mm

Nylon Ball Joint M2.5 x 27mm x 3mm (2pcs)

Suitable to fit small electric motors which have threaded prop shafts, these rubber safety spinners push over the shaft, prop retaining nut and the prop to create a safe forward projection of your model, particularly important when flying at indoor events.

Specs:
Diameter: 23mm
Length: 32mm

Landing Gear Straps (Nylon) 10pc

Specs:
Length: 22mm
Width: 10mm
Hole Centers: 12mm
Material: Nylon

This POM clevis uses a 2mm nut and bolt instead of a plastic pin, used with loctite this makes a very strong and secure linkage.

Specs:
Overall Length: 29mm
Pushrod Size: M2
Material: Clear nylon

Very well formed, light weight and firm, foam wheels.

Specs:
Diameter: 65mm
Width: 10mm
Material: Foam (Tyres) Plastic (Hub)
Weight: 7.5g (Per wheel)

Lock on nylon control horn for ailerons, elevators, rudders and similiar applications. The backplate pushes over the serrations on the horn and locks it into place, no need for glue.

Specs:
Length of Horn from Base: 18mm
Max Thickness of Control Surface: 6mm
Length of Base: 12mm
Width of Base: 8mm
Material: Nylon
Fixing: Lock on

Ideal for making a neat job of a charging station etc.

Features:
• Male/Female XT60 connector
• Panel mounting bracket
• Neat XT60 protective cover
• Mounting screw set.

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

Push Through Transparent Zip Horn (10pcs)

Easy to fix, just push through the control surface and secure with the supplied clips. Very quick, easy and secure. For control surface thickness of 5 to 10mm. Each has three holes for push rod adjustment.

Specs:
Dimensions: 34 x 9.5 x 34mm
Weight: 0.65g (Each)
Quantity: 10

Heavy Duty Ball Link 27mm M3 Black (10pcs)

Specs:
Dimensions: 10.5 x 6.2 x 31mm
Weight: 1.6g  (each)
Color: Black
Quantity: 10

Heavy Duty Ball Link 27mm M3 Black (10pcs)

Specs:
Dimensions: 9.8 x 7.6 x 27mm
Weight: 1.6g  (each)
Color: Black
Quantity: 10

Metal Ball Joints M2.5 × 12.5mm × 4mm - 2pcs

Heavy Duty Nylon Clevises (5pcs)

Specs:
Material: Plastic
Dimensions: 23 × 12.5 × 10mm
Weight: 2g (each)

Self Assembly Pedal Operated Bungee Launch System/Ramp for FPV/Glider and EDF Models - Hand launching models can be a tricky business and most flyers have had it all go wrong for them at some point, this great launch system is easy to transport & field assemble and allows you to launch totally solo with the peace of mind of adequate airspeed every time for a succesful launch, everything you need is included!

Dimensions once Assembled:
Ramp Length - 1060mm
height at rear - 240mm
height at front -  460mm
width of launch rails - 470mm

Material:
Ramp - GF Tubing with Plastic Joiners
Foot Launch System - Ply with surgical rubber hose (2 metres)

2.25" Carbon Fiber Spinner, suits 6mm shaft.

Weight: 30g

Precision 2.75" Carbon Fiber Spinner, supplied with 6mm adapter.

Weight: 37g 

Precision 3.5" Carbon Fiber spinner with alloy backplate and 6mm shaft adapter.

Weight: 79.3g

GWS Style 12x3.8 Slowfly Propeller Black (4pcs).

GWS Style 14x4.7 Slowfly Propeller Grey (2pcs).