Workbench

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 110mm.

Specs:
Fuselage Width: 110mm
Height: 160mm
Wheel Track: 320mm
Weight: 53g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 170mm.

Specs:
Fuselage Width: 170mm
Height: 170mm
Wheel Track: 370mm
Weight: 79g

This 2 piece carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for fuselages with a minimum width of 170mm, however the legs can be spaced apart to fit aircraft with a much wider fuselage. 

Specs:
Fuselage Width: 170mm
Height: 280mm
Wheel Track: 580mm
Weight: 315g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 45mm
Height: 50mm
Weight: 15g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 57mm
Height: 64mm
Weight: 23g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 83mm
Height: 93mm
Weight: 46g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 108mm
Height: 122mm
Weight: 94g

Carbon fiber spinner and aluminum backplate. Spinner does not have any propeller cut outs. For 6 or 8mm shaft. Can be drilled for larger applications. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 96mm
Height: 118mm
Weight: 104g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 50cc sized models.

Specs:
Length: 96mm
Width: 13.2mm
Weight: 5.8g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 80cc sized models.

Specs:
Length: 118mm
Width: 14.2mm
Weight: 7.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. 

Suited for models up to .25 size Nitro/Electric planes.

Specs:
Length: 47mm
Width: 9mm
Mounting Hole Spacing: 18mm
Weight: 1.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 150cc sized models.

Specs:
Length: 174mm
Width: 14mm
Weight: 10.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 120cc sized models.

Specs:
Length: 170mm
Width: 12mm
Weight: 9g

Free Flight Propeller 1.3" Mini Pitch Carbon Fiber (1pc)

This carbon fibre landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 100mm.

Specs:
Fuselage Width: 100mm
Height: 170mm
Wheel Track: 315mm
Weight: 52g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeler.

Made of quality carbon fiber, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high-quality spinner is also the perfect choice to finish off any model requiring a spinner of this size.

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fibre, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 2.5" ultra lightweight carbon fibre spinner with aluminium backplate

Weight: 14.2g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fiber, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 1.75" ultra lightweight carbon fiber spinner with aluminium backplate

Weight: 6.9g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fibre, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 3" ultra lightweight carbon fibre spinner with aluminium backplate

Weight: 22.3g

This lightweight Carbon Fiber Tail Wheel Bracket is good for planes up to 30cc or EP planes.

Specs:
Length: 90mm
Thickness: 2.8mm
Width: 12mm
Weight: 5.8g

44mm diameter alloy spinner for folding prop, comes with adapters for 3.17mm, 4mm & 5mm motor shafts.

Prop Mount Bolts: 2.2mm
Weight: 36g

This pushrod is left hand threaded on one side, and right hand threaded on the other. This enables you to adjust the pushrod length easily.

Spec.:
Diameter: M2
Total Length: 30mm
Weight: 0.5g

2mm 2 Blade CNC Folding Propeller Adapter CW & CCW (Gold)

Perfect for multi-rotors, pack comes complete with M2.5 mounting screws for the folding propeller blades.

Specs:
Suits Motor Shafts: 2mm
Blade Thickness: 3mm
Blade Mounting: M2.5
Direction: 1 x Clockwise, 1 x Counterclockwise
Material: Aluminum
Color: Gold
Weight: 6g each

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 10g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 10g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3.17mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

5 x 3 Folding Propeller Blades 1 Set CW and 1 Set CCW (Blue)

Perfect for 250 style multiracers and multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 5ins
Pitch: 3ins
Root Thickness: 2.4mm
Mounting Hole: 2mm
Rotation: 1 pair clockwise, 1 pair counterclockwise
Color: Blue
Weight: 0.12g each blade

8 x 4.5 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Blue)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 8ins
Pitch: 4.5ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Blue
Weight: 3g each blade