Workbench

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 80mm.

Specs:
Fuselage Width: 80mm
Height: 100mm
Wheel Track: 215mm
Weight: 17g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 100mm.

Specs:
Fuselage Width: 100mm
Height: 115mm
Wheel Track: 245mm
Weight: 23g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 110mm.

Specs:
Fuselage Width: 110mm
Height: 140mm
Wheel Track: 320mm
Weight: 48g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 130mm.

Specs:
Fuselage Width: 130mm
Height: 150mm
Wheel Track: 355mm
Weight: 68g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 150mm.

Specs:
Fuselage Width: 150mm
Height: 170mm
Wheel Track: 355mm
Weight: 115g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for large Extra 300 aircraft but it is also suitable for other large models with a fuselage width of 150mm.

Specs:
Fuselage Width: 150mm
Height: 205mm
Wheel Track: 475mm
Weight: 165g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for large Extra 300 aircraft but it is also suitable for other large models with a fuselage width of 190mm.

Specs:
Fuselage Width: 190mm
Height: 255mm
Wheel Track: 560mm
Weight: 305g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. Designed for large Extra 300 aircraft but it is also suitable for other large models with a fuselage width of 230mm.

Specs:
Fuselage Width: 230mm
Height: 265mm
Wheel Track: 665mm
Weight: 350g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 22mm long x 18mm wide
Height: 110mm
Wheel Track from Center of Mounting Plate: 90mm (each)
Weight: 6g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 45mm long x 30mm wide
Height: 175mm
Wheel Track from Center of Mounting Plate: 105mm (each)
Weight: 20g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 55mm long x 25mm wide
Height: 190mm
Wheel Track from Center of Mounting Plate: 180mm (each)
Weight: 42g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 55mm long x 25mm wide
Height: 200mm
Wheel Track from Center of Mounting Plate: 165mm (each)
Weight: 31g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 60mm long x 40mm wide
Height: 235mm
Wheel Track from Center of Mounting Plate: 210mm (each)
Weight: 64g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for F3A style airplanes.

Specs:
Mounting Plate: 60mm long x 40mm wide
Height: 250mm
Wheel Track from Center of Mounting Plate: 235mm (each)
Weight: 80g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for small electric airplanes.

Specs:
Mounting Plate: 14mm long x 9.5mm wide
Height: 100mm
Wheel Track from Center of Mounting Plate: 75mm (each)
Weight: 2g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce the drag. The landing gear is supplied in 2 pieces and is designed for small electric Extra 300 airplanes, it will also fit other similar size aircraft.

Specs:
Mounting Plate: 50mm long x 20mm wide
Height: 130mm
Wheel Track from Center of Mounting Plate: 100mm (each)
Weight: 9.6g (each)

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 125mm.

Specs:
Fuselage Width: 125mm
Height: 185mm
Wheel Track: 420mm
Weight: 90g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 110mm.

Specs:
Fuselage Width: 110mm
Height: 160mm
Wheel Track: 320mm
Weight: 53g

This carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 300 aircraft but it is also suitable for other models with a fuselage width of 170mm.

Specs:
Fuselage Width: 170mm
Height: 170mm
Wheel Track: 370mm
Weight: 79g

This 2 piece carbon fiber landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for fuselages with a minimum width of 170mm, however the legs can be spaced apart to fit aircraft with a much wider fuselage. 

Specs:
Fuselage Width: 170mm
Height: 280mm
Wheel Track: 580mm
Weight: 315g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 45mm
Height: 50mm
Weight: 15g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 57mm
Height: 64mm
Weight: 23g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 83mm
Height: 93mm
Weight: 46g

Carbon fiber spinner and carbon backplate. Spinner does not have any propeller cut outs. Suits 10mm shaft. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 108mm
Height: 122mm
Weight: 94g

Carbon fiber spinner and aluminum backplate. Spinner does not have any propeller cut outs. For 6 or 8mm shaft. Can be drilled for larger applications. Must provide own spinner/shaft adapter nut

Specs:
Diameter: 96mm
Height: 118mm
Weight: 104g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 50cc sized models.

Specs:
Length: 96mm
Width: 13.2mm
Weight: 5.8g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 80cc sized models.

Specs:
Length: 118mm
Width: 14.2mm
Weight: 7.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. 

Suited for models up to .25 size Nitro/Electric planes.

Specs:
Length: 47mm
Width: 9mm
Mounting Hole Spacing: 18mm
Weight: 1.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 150cc sized models.

Specs:
Length: 174mm
Width: 14mm
Weight: 10.5g

Carbon fiber tail wheel brackets add good looks, strength, and most importantly, keep excess weight out of the tail of your airplane. Made from 3K Carbon cloth, these brackets are light and strong. Comes un-drilled so it can suit a wide variety of models. Drill dimple marks are molded in for easy drilling.

Suited for models up to 120cc sized models.

Specs:
Length: 170mm
Width: 12mm
Weight: 9g