Workbench

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

The Boom Stopper will help stop short circuits from blowing your electronics up. Simply plug in the Boom Stopper between the power source, usually your battery, and the components you are wanting to power for the first time. If there is a problem the inline 2A fuse will blow, instead of your components. When the fuse is blown the LED will light up indicating there is a short circuit and the Boom Stopper will reduce the current to a level that won't immediately damage your electronics, giving you time to remove the power supply. 

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: 7.0g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

This latest addition to the XT60 range provides an integrated mount on the side of the XT60 with a 5mm mounting hole. This can be used to fix it to a drone frame (via a cable tie) or can be mounted to a frame stand-off. It could also be mounted to a battery tray in a plane or boat.

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mold at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: Male plug: 7.0g / Female plug: 7.6g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

The male connector uses a collet style spliced contact area to provide more surface to surface contact than standard gold connectors which use a thin mushroomed sheet as a spring.

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: 7.6g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT60's have been around for some time now.  These now come with a mounting base that can be screwed down to the mounting base of your drone or any other product that has a solid base. This will make connecting your battery even easier. They come in a 5 pack of male connectors making it easy to connect to your PDB or ESC's and are in a fashionable black. Made from the same high-quality nylon as the original yellow XT60, these connectors can withstand up to 60A continuous without overheating, deforming or breaking apart.

This neat adapter is perfect for converting your balance plug to a 2 pin JST connector, ideal for connecting lights and other auxillary components.

This neat adapter is perfect for converting your balance plug to a 2 pin JST connector, ideal for connecting lights and other auxillary components.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras and more. These picoblade-compatible pins can repair cables or help you make your own.

Excellent EC5/bullet connector replacements. Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered. Don't starve your high-amp power system, switch to XT90 connectors today! 

Excellent EC5/bullet connector replacements. Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. 

XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller applications, we have designed the XT30 to meet the needs of the mini-revolution. From 250 class Quadcopters to foamy flyers this is the new standard for you!

Made from high-temp Nylon and gold plated spring connectors, both are included in the same injection mold at the time when forming the connector. The XT30 ensures a solid high-amp connection, perfect for applications up to and beyond 35A constant.

XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller applications, we have designed the XT30 to meet the needs of the mini-revolution. From 250 class Quadcopters to foamy flyers this is the new standard for you!

Made from high-temp Nylon and gold plated spring connectors, both are included in the same injection mold at the time when forming the connector. The XT30 ensures a solid high-amp connection, perfect for applications up to and beyond 35A constant.

3.5mm Male/Female bullet on opposing ends.

3.5mm Male/Female bullet on opposing ends.

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.

Use this adapter lead to charge batteries with 4MM Bullet Connector plugs, even those with reversed polarity Connectors using the supplied adaptors.