HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Don't let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!

Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR

HobbyKing 939MG Metal Gear Servo 2.5kg/ 0.14sec / 12.5g
A strong performer with a very smooth movement and good centering.
Excellent for parkflyers or planes up to .40 size (3,500mAh electric).

The Turnigy D56MG HV is great for small 3D planes and parkflyers where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price. The HV voltage lets you use a 2s Lipo or LiFE battery directly with no need for a BEC.

The Turnigy D56LV is great for small gliders and DLGs, or just about any other mini airplane using single cell LiPoly batteries (3.7V) and where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price.

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Turnigy analog micro servo offering good torque, high speed, excellent centering and a great price!

The strong gear train is all metal geared.

Specs:
Weight: 9g
Size: 23.1mmx12.0mmx25.9mm
Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v)
Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v) 
Voltage: 4.8-6.0v
Type: Analog Micro
Gear Train: Metal
Ball Bearing: No
Lead Length: 240mm
Plug: JR/Futaba
Spline Count: 20

Looking for solid, high torque servos for your 1/5th scale car, truck or buggy? The Trackstar TS-500HD servos are just the ticket! The servos have a torque range of 27.3 - 32kg whilst still maintaining good operating speeds across its 4.8 - 7.4v input range. The servo's temperature is maintained by its beautifully machined heat sink housing which has a cool red anodized finish.

The Trackstar TS500HD servos are an excellent choice for everday bashing and can even handle the toughest of off-road tracks in almost any race conditions!

Servos are supplied complete with control horns and all necessary fixtures and fittings.
  
Specs:
Operating Voltage: 4.8 ~ 7.4v
Weight: 188g
Dimensions: 68 x 60 x 30 mm
Torque: 27.3kg (4.8v) 30.5kg (6.0v) 32kg (7.4v) 
Speed: 0.22sec/60deg (4.8v) 0.20sec/60deg (6.0v) 0.19 sec/60deg (7.4v)
Motor: Brushed DC motor 
Gear Train: Metal
Spline Count: 17

If you're looking for the ultimate steering servo for your 1/10th touring, drift car or buggy, we have just the thing!

The TrackStar TS-D99X is a standard size low profile digital servo featuring a titianium geartrain, coreless motor and a fast 0.08sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Specs:
Weight: 45g
Size: 40mmx20mmx25.5mm
Torque: 8kg.cm (4.8V)~10kg.cm (6.0V)
Speed: 0.09 sec/60deg (4.8V)~0.08 sec/60deg (6.0V)
Voltage: 4.8V~6.0V
Type: Digital Standard
Gear Train: Titanium
Ball Bearing: Dual BB
Servo teeth: 25T
Lead Length: 285mm
Plug: JR/Futaba

The Turnigy TG9d is the new standard in low cost digital servos in the 9 gram class. Boasting the holding power and precision of digital, something needed for your small, high performance park flyers. We include a selection of servo arms to work with most applications. With a price tag that rivals cheaper analog servos, the TG9d is a awesome upgrade that won't beak the bank.

Features:
• Plastic Bushing
• Heavy Duty Output Spline
• Servo arms & screw included
• Perfect for high performance parkflyers

Specs:
Size : 22.4x12.5x23mm 
Voltage : 4.8v~6v
Weight: 9g / 0.39oz
Speed : 0.10 sec/60 (4.8V)0.09 sec/60 (6.0V)
Torque : 1.6kg-cm (4.8V)1.8kg-cm (6.0V)
Working Temp : -30C~60C 
Gears: Nylon White type
Spline Count: 21

If you're looking for the ultimate steering servo for your 1/12th pan car, we have just the thing!

The TrackStar TS-P12S is a mini size high speed digital servo featuring a titianium geartrain, coreless motor and a fast 0.05sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Specs:
Weight: 28g
Size: 36mmx15mmx29mm
Torque: 2.8 kg.cm (4.8V)~3.6 kg.cm (6.0V)
Speed: 0.06 sec/60deg (4.8V)~0.05 sec/60deg (6.0V)
Voltage: 4.8V~6.0V
Type: Digital Standard
Gear Train: Titanium
Ball Bearing: Dual BB
Servo teeth: 25T
Lead Length: 285mm
Plug: JR/Futaba

Turnigy TGY-AN13 analog car servo suitable for 1:8 & 1:10 scale cars with a tough, metal geartrain.

Supplied with a full hardware pack.

Specs:
Torque: 13.2kg/cm (4.8V)~14.5kg/cm (6.0V)
Speed: 0.15sec/60deg (4.8V)~0.13sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Metal
Plug: JR type
Size: 40 x 37.5 x 20mm
Weight: 58g
Spline Count: 25

If you're looking for the ultimate all-round servo for your 450 or 500 size heli, we have just the thing!

The RotorStar™ RS-3878MGT is a mini digital servo featuring a metal gear train, great torque and with its tricked out looks, gives you have one outstanding servo for the price!

Perfect for the HK450TT, Trex 450 and just about any other similar size heli on the market today!

Specs:
Model: RS-3878MGT
Operating Voltage: 4.8V~6.0V
Operating speed: 0.13s/60° @ 4.8V, 0.12s/60° @ 6.0V
Stall Torque: 5.5kg/cm @ 4.8V, 6.8kg/cm @ 6.0V
Gear type: Metal
Plug: JR type
Size: 36 x 15 x 29mm
Weight: 28g
Spline Count: 25

Turnigy TGY-AN3 standard analog servo suitable for a wide variety of applications with a tough, plastic geartrain for low noise and minimal backlash.

Supplied with a full hardware pack.

Specs:
Torque: 3.2kg/cm (4.8V)~3.6kg/cm (6.0V)
Speed: 0.15sec/60deg (4.8V)~0.13sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Plastic
Plug: JR type
Size: 40 x 37 x 20mm
Weight: 40g
Spline Count: 25

The Turnigy TGY-1551A is a precise, jitter free analog servo suitable for small parkflyers or light 3D planes.

Specs:
Torque: 0.8kg/cm (4.8V)~1.0kg/cm (6.0V)
Speed: 0.10sec/60deg (4.8V)~0.08sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Plastic
Plug: JR type
Size: 21.5 x 18 x 11.5mm
Weight: 5g
Spline Count: 24

The Turnigy TGY-1601A is a precise, jitter free analog servo suitable for small parkflyers or light 3D.

Specs:
Torque: 1.0kg/cm (4.8V)~1.2kg/cm (6.0V)
Speed: 0.11sec/60deg (4.8V)~0.09sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Analog
Gear Train: Plastic
Plug: JR type
Size: 21.5 x 20 x 11.5mm
Weight: 6g
Spline Count: 24

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a red anodised finish.

Weight: 27g

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a silver anodised finish.

Weight: 27g

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Spare Part - RC Adapter Graupner/JR for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Naked (you put your own adapter on) for Scherrer Rx700LR Long Range UHF System

Spare Part - RC adapter plug for Futaba for Scherrer LR UHF System

Spare Part - RC adapter plug for MPX for Scherrer LR UHF System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

The OrangeRx SF7003XS has all the properties and features of the original FASST compatible receivers in the OrangeRx brand but this one now operates on the later Futaba FHSS (Frequency Hopping Spread Spectrum) system. This receiver also has S-Bus and a built in 3 axis stabilizer which is brilliant in model airplanes to help beginners master the art of RC flying and for experienced pilots to make their flying even smoother. This receiver is perfect for the large gliders with long wingspans, it really helps to smooth out the turns and nose attitude when thermalling at higher altitudes.

The stabilizer function has 5 modes, mixer off, dual ailerons, V-tail mixing, delta mix and dual aileron/V-tail mixer. There are independent, simple to use gyro gain adjustments for the aileron, elevator and rudder functions, the stabilizer function can also be switched on and off in flight via CH5. The S.Bus functionality is perfect for large models and gliders that utilize a lot of servos, especially in the wings, it reduces the amount of wiring and keeps things nice and tidy.

The receiver will also accept a wide range of input voltages from 3.6~8.5V which is great if you want to use LV and HV type servos.

Compatible with the following Futaba FHSS 2.4Ghz air systems: 4YF, 6J, 8J and 10J, can also be used with the T14SG under S-FHSS protocol mode

Features:
• Lightweight (16g)
• Compatible with FHSS 2.4Ghz air systems
• 7 channels
• Built in 3 axis stabilizer
• 5 stabilizer modes
• Supports SBus
• Compact design (54 x 32 x 13mm)
• Failsafe and battery failsafe
• Extremely low latency
• Fast frame rates
• Hops from frequency to frequency in a pseudorandom sequence
• Advanced algorithms create a secure frequency

Specs:
Type: SF7003XS
Input Voltage: 3.6~8.5V
Operating Current: 60mA max
Battery Failsafe Voltage: 3.8V
Latency: 6.8mS
Sensitivity: About -96dBm
Dimensions: 54 x 32 x 13mm
Weight: 16g

Included:
OrangeRx SF7003XS receiver
Plastic screwdriver for making adjustments
Instruction manual

Note:
All OrangeRx receivers come with a 12 month warranty. This is not a Futaba receiver, nor is it a copy of a Futaba receiver. Futaba, FASST and FHSS are trademarks of Futaba Co (JP).

The Orange R8DM is a 2.4GHz DMSS compatible receiver that is designed for use with JR DMSS 2.4GHz transmitters, such as XG6,XG7,XG8 ,XG11 and XG14 under DMSS protocol mode.

Affordable and with a great reputation for reliability, Orange receivers are a fantastic alternative for budget conscious hobbyists and this 8 channel receiver for JR 2.4Ghz transmitters is just outstanding value. 

Features:
• Full Range Receiver
• 8 Channels - Throttle, Aileron, Rudder, Elevator, Gear, Aux1, Aux2, SBAux3. 
• SBUS support on channel 8 (Aux3)
• For use with JR DMSS transmitters
• Light weight
• Fail Safe Programable

Specs:
Model: RG831B 
Type: Full range receiver 
Channels: 8 
Modulation: DMSS 
Band: 2.4GHz 
Weight: 11g
Voltage Range: 3.6V~8.5V