Strong, well crimped and finished.
High quality wire and terminals used.

Servo Lead Lock (5pcs/bag)

Size: L30×W12×H5mm

CNC Rudder 2 Tray 4.0 inch (#4-40) Black

Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85g

COLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone image

This is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.

This tray features dual ball bearings for ultra-smooth and precise movement.

Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.

The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!

Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.

Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!

Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mm

Mount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mm

Not suitable for a plane heavier than 2kg
Strut & Landing gear not included

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a red anodised finish.

Weight: 27g

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a silver anodised finish.

Weight: 27g

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Spare Part - RC Adapter Graupner/JR for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Naked (you put your own adapter on) for Scherrer Rx700LR Long Range UHF System

Spare Part - RC adapter plug for Futaba for Scherrer LR UHF System

Spare Part - RC adapter plug for MPX for Scherrer LR UHF System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

The OrangeRx SF7003XS has all the properties and features of the original FASST compatible receivers in the OrangeRx brand but this one now operates on the later Futaba FHSS (Frequency Hopping Spread Spectrum) system. This receiver also has S-Bus and a built in 3 axis stabilizer which is brilliant in model airplanes to help beginners master the art of RC flying and for experienced pilots to make their flying even smoother. This receiver is perfect for the large gliders with long wingspans, it really helps to smooth out the turns and nose attitude when thermalling at higher altitudes.

The stabilizer function has 5 modes, mixer off, dual ailerons, V-tail mixing, delta mix and dual aileron/V-tail mixer. There are independent, simple to use gyro gain adjustments for the aileron, elevator and rudder functions, the stabilizer function can also be switched on and off in flight via CH5. The S.Bus functionality is perfect for large models and gliders that utilize a lot of servos, especially in the wings, it reduces the amount of wiring and keeps things nice and tidy.

The receiver will also accept a wide range of input voltages from 3.6~8.5V which is great if you want to use LV and HV type servos.

Compatible with the following Futaba FHSS 2.4Ghz air systems: 4YF, 6J, 8J and 10J, can also be used with the T14SG under S-FHSS protocol mode

Features:
• Lightweight (16g)
• Compatible with FHSS 2.4Ghz air systems
• 7 channels
• Built in 3 axis stabilizer
• 5 stabilizer modes
• Supports SBus
• Compact design (54 x 32 x 13mm)
• Failsafe and battery failsafe
• Extremely low latency
• Fast frame rates
• Hops from frequency to frequency in a pseudorandom sequence
• Advanced algorithms create a secure frequency

Specs:
Type: SF7003XS
Input Voltage: 3.6~8.5V
Operating Current: 60mA max
Battery Failsafe Voltage: 3.8V
Latency: 6.8mS
Sensitivity: About -96dBm
Dimensions: 54 x 32 x 13mm
Weight: 16g

Included:
OrangeRx SF7003XS receiver
Plastic screwdriver for making adjustments
Instruction manual

Note:
All OrangeRx receivers come with a 12 month warranty. This is not a Futaba receiver, nor is it a copy of a Futaba receiver. Futaba, FASST and FHSS are trademarks of Futaba Co (JP).

The Orange R8DM is a 2.4GHz DMSS compatible receiver that is designed for use with JR DMSS 2.4GHz transmitters, such as XG6,XG7,XG8 ,XG11 and XG14 under DMSS protocol mode.

Affordable and with a great reputation for reliability, Orange receivers are a fantastic alternative for budget conscious hobbyists and this 8 channel receiver for JR 2.4Ghz transmitters is just outstanding value. 

Features:
• Full Range Receiver
• 8 Channels - Throttle, Aileron, Rudder, Elevator, Gear, Aux1, Aux2, SBAux3. 
• SBUS support on channel 8 (Aux3)
• For use with JR DMSS transmitters
• Light weight
• Fail Safe Programable

Specs:
Model: RG831B 
Type: Full range receiver 
Channels: 8 
Modulation: DMSS 
Band: 2.4GHz 
Weight: 11g
Voltage Range: 3.6V~8.5V 

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Specs:
Maximum throughput : 10A / 30v
Weight: 7g

Receiver for the Turnigy TGY-i6 transmitter. This parkflyer sized receiver features dual antennas for optimal performance and no fear of interference.

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• Ultra light weight design
• Dual antennas for most reliable interference free operation

Turnigy iA6 Receiver Specs:
Channel: 6
Frequency: 2.4g ISM Frequency Range
Power: 4.5V~6.6V/<30ma
Net Weight: 6.4g
Dimensions: 40.4x21.1x7.35mm

The HobbyKing® ™ GT2E is a affordable, 2-channel 2.4ghz ground radio, with adjustable steering dual-rate and servo reversing, making it a very simple setup for your car or boat. The automatic frequency hopping digital system provides a strong, reliable 2.4ghz signal, so rest assured you'll always be in control. Included in the package is a 3-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions.

Features:
• Reliable, interference free 2.4GHz AFHDS signal operation
• 2CH operation
• Use only 4xAA batteries for transmitter
• Adjustable steering dual-rate
• Simple binding procedure

Transmitter Specs:
RF Power: 20dBm (100mW) max
Modulation: GFSK
System Type: AFHDS 2A
Sensitivity: 1024
Low Voltage Warning: Yes
DSC Port: 3.5mm
Charge Port: Yes (3.5IN)
Power: 4xAA, 6VDC
Weight: 241g

Receiver Specs:
RF Receiver Sensitivity: -105dBm
Modulation: GFSK
System Type: AFHDS 2A
Sensitivity: 1024
Failsafe: Yes (Channel 2)
Power Port: Yes (VCC)
Power: 4.5~6.5 VDC 
Weight: 5g
Antenna Length: 26mm
Dimensions: 37x22x12mm

Includes:
HK-GT2E transmitter
HK-GT2E 3CH receiver
Antenna tube
Bind plug
User manual

HobbyKing™ GT2E 2.4Ghz Receiver 3Ch

Model: Car/Boat
Channels: 3ch
Frequency band: 2.4Ghz
RF Receiver Sensitivity: -105dBm
Modulation: GFSK
System Type: AFHDS 2A
Sensitivity: 1024
Failsafe: Yes (Channel 2)
Power Port: Yes (VCC)
Power: 4.5~6.5 VDC 
Weight: 5g
Antenna Length: 26mm
Dimensions: 37x22x12mm

The Turnigy TGY-i6 is a great entry level 6-channel telemetry 2.4GHz computer transmitter that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology. The Turnigy TGY-i6 has both a nice quality look and feel, while the programming is simple to use. The TGY-i6 also has an impressive list of features and includes a TGY-iA6 6-channel receiver. Suitable for both model Heli and Airplane, the Turnigy TGY-i6 is a superb budget computer radio for both new pilots and experienced pilots alike!

The Turnigy TGY-i6 is a great entry-level 6-channel telemetry 2.4ghz computer transmitter that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology. The Turnigy TGY-i6 has both a nice quality look and feel, while the programming is simple to use. The TGY-i6 also has an impressive list of features and includes a TGY-iA6 6-channel receiver. Suitable for both model helicopters and airplanes, the Turnigy TGY-i6 is a superb budget computer radio for both new and experienced pilots!