Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the other leads turned on their side for signal only, makes for a clean and minimal vibration transfer installation. Or better yet a single CPPM/SBUS single lead. 

Specs:
Length: 130mm(black/red/white)
Connection: Male JR style plug on each end.

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the leads turned on their side for signal only makes for a clean and minimal vibration transfer installation, or better yet a single CPPM/SBUS single lead.

Specs:
Length: 80mm(black/red/white)
Connection: Male JR style plug on each end.

Specs:
Model: TGY-225MG
Voltage: 4.5 - 6v
Speed: .12s
Running Current: 180mA
Torque: 3.5kg/cm
Gears: Metal
Weight: 26g
Spline Count : 21 Tooth

Narrow dead band width.

The HX5010 servo won't break any records, it won't astound you with its amazing torque or scare your friends with its ninja-like high-speed action, but it is a solid, reliable plastic gear servo that's economical and great for those that are not too serious about the specification.

HX5010 servos shipped as of Aug 1, 2014, are digital versions, no longer analog. Same great price, and even better performance!

HXT500, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT500 is the #1 trusted low-cost 5g servo.

Features:
• Teflon bushing
• 15cm wire
• Coreless motor
• Servo arms & screw included

Specs:
Size: 21.3x11.5x22 mm
Voltage: 4.8v ~ 6v
Weight: 6.2g
Speed: 0.10 sec/60(4.8V)
Torque: 1.2kg-cm
Working Temp: -30C~60C
Gears: Plastic

WARNING
These servos can be found on eBay and other asian seller stores at close to this price, however be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!

HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9.8g servo.

Features:
• Teflon bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included

Specs:
Size : 23x12x23 mm / 0.9x0.47x0.9 in
Voltage : 3v ~ 6v
Weight: 9.8g / 0.35oz
Speed: 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp: -30C~60C
Gears: Nylon White type

WARNING
Similar-looking servos can be found on eBay and other Asian sellers. However be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!

This is essentially an upgraded version of the famous Towerpro MG995 servo. It now has a redesigned PCB and IC control system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
All specifications are the same as the previous model MG995, however, this servo is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering.

Micro Servo Connector Lead 1.25 Pitch - Female Plug (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Micro Servo Connector Lead 1.25 Pitch - Female Connector (5pcs/bag)

Spec.
Length: 70mm
Plug Type: 1.25 Pitch Micro

Strong, well crimped and finished.
High quality wire and terminals used.

Servo Lead Lock (5pcs/bag)

Size: L30×W12×H5mm

CNC Rudder 2 Tray 4.0 inch (#4-40) Black

Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85g

COLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone image

This is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.

This tray features dual ball bearings for ultra-smooth and precise movement.

Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.

Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Corona 939MG Metal Gear Servo 2.5kg / 0.14sec / 12.5g

Corona DS329MG Digital Metal Gear Servo 3.8kg / 0.11sec / 32g

Corona DS339MG Digital Metal Gear Servo 4.4kg / 0.15sec / 32g

Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!

Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.

Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!

Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mm

Mount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mm

Not suitable for a plane heavier than 2kg
Strut & Landing gear not included