Radio / Servos
RC Radio Servos
Two of the most important things an RC enthusiast seeks to refine continuously are the precision and control of their RC vehicle. It makes them have a more reliable and satisfying experience. If you’ve come looking for the same, your search ends here at HobbyKing. We have curated a vast selection of radio servos based on their performance and quality to suit your requirements.
-
Corona CS-239MG Slim-Wing Analog Servo 4.6kg / 0.14sec / 22g$8.87Corona CS-239MG Slim-Wing Analog Servo 4.6kg / 0.14sec / 22g
Learn More -
Corona DS-319HV Digital Metal Gear Servo 4.2kg / 0.05sec / 34g$10.71Corona DS-319HV Digital Metal Gear HV Servo 4.2kg / 0.05sec / 34g
Digital with MOSFET driveModel: DS-319HV
Learn More
Operating Voltage: 7.4V
Operating Speed: 0.05sec.60º
Stall Torque: 4.2kg.cm
Size: 32.5 x 17 x 34.5mm
Weight: 34g (inc wire and plug)
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 5 slider/indirect Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 300mm
Operating Temperature Range: -20°c + 60°c -
Corona DS928HV Digital Servo 1.7kg / 0.09sec / 9g$7.68Corona digital servo's are a must for the modeller who wants a reliable, high specification servo.
Learn More -
Corona DS-236MG Metal Gear Servo 7.0kg / 0.12sec / 27g$12.57Corona digital servo's are a must for the modeller who wants a reliable, high specification servo.
Features:
• Higher resolution
• The tightest dead band
• Accurate positioning
• Faster control response
• Quicker acceleration
• Constant torque throughout the servos travel
• Increased holding power when stationary
Learn More -
Corona DS-843MG Digital High Torque Micro Servo 4.8kg / 0.10sec / 11g$18.95Corona digital servos are a must for the discerning pilot. They have higher resolution, accurate positioning, faster control response, constant torque throughout the servos travel, increased holding power, and a really tight deadband.
The Corona DS-843MG metal geared servo is not only fast (0.10sec/60°) but it has an incredible amount of torque (4.8kg) which for a servo weighing only 8.5g is quite something.
Learn More
Features:
• High resolution
• Accurate positioning
• Fast control response
• Constant torque throughout servo travel
• Excellent holding power
• Tight deadband
• Quick acceleration
• High torque -
Power HD 1810MG Metal Gear Brushed Digital Servo 21T 3.9kg / 0.13sec / 15.8g$17.58The HD-1810MG digital servo from Power HD is a high performance mini servo with an aluminum case for improved rigidity and cooling under load.
The servo features metal gears for optimum strength and smoothness of operation with a ball bearing providing outstanding support for the output shaft.
Full accessory pack is included with the servo.
Specs:
Weight: 15.8g
Dimensions: 23 x 12 x 29mm
Torque @ 4.8V: 3.1 kg/cm
Torque @ 6.0V: 3.9 kg/cm
Speed @ 4.8V: 0.16 sec / 60° at no load
Speed @ 6.0V: 0.13 sec / 60° at no load
Gear: Metal gear/Ball bearing
Motor: Coreless
Spline Count: 21Included:
Learn More
One Power HD 1810MG Metal Gear Coreless Digital Servo
One acessory pack -
BMS-373 Micro Servo 1.8kg / .08sec / 9.1g$9.98BMS-373 Micro Servo 1.5kg / .13sec / 9.2gContinuing the Blue Bird tradition of affordable performance. By using plastic gears and optimizing the curvature of the gears, the gears are able to withstand over 3.5kg of force. With a tolerance of less than 0.3 degree per PWM step, this servo is perfect for CCPM helicopter control, precision aerobatic aircraft, and 1/18 scale cars.The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide.1. High-torque motor with low RF noise (CE certified)
2. Rubber seals for waterproof case
3. Designed to be used in R/C helicopter applications.
4. Futaba compatible 25 tooth output splines
5. 2PEW coated motor wire for high-temperature use
Weight: 9.2 grams / 0.34oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.5kg/cm , 22 oz/in
Speed At 4.8V: 0.13sec / 60 deg at no loadLearn More -
Sail Winch Servo 25T 10.63kg / 0.9sec (360deg) / 55g$14.00Sail Winch Servo 13kg / 0.7sec (360deg) / 55g
Learn More
Spec.
Weight: 55g
Dimensions: 40.5 x 20.2 x 38mm
Speed: 0.9sec / 360deg (4.8v) - 0.7sec / 360deg (6.0v)
Torque: 11kg.cm (4.8v) - 13kg.com (6.0v)
Operating voltage: 4.8 - 6.0V
Gear train: Metal
Spline Count: 25 -
Turnigy™ TG9e Eco Micro Servo 1.5kg / 0.10sec / 10.1g$2.77THE WORLDS LOWEST COST (RELIABLE) SERVOThe TG9e boasts the same performance as other servos 10x the price, with a .10sec travel time, up to 1.5kg in torque, and an ultra-narrow dead bandwidth!The TG9e's performance is on par with the famous HXT900, however, the TG9e isn't as resistant to crashes or over-loading.Please always ensure your control surfaces are bind free.Specs:Dimension: 23x12.2x29mmTorque: 1.5kg/cm (4.8V)Operating speed: 0.10sec/60 degree 0.09sec/60 degree(6.0V)Operating voltage: 4.8VTemperature range: 0-55CDead band-width: 7usLead Length: 260mmLearn MoreImportant.
The TG9e does not have the same strength and longevity as the HXT900.Please ensure your control surfaces are bind-free and always check servos after a hard landing or crash! -
Turnigy™ TGY-1370A Servo 20T 0.4kg / 0.10sec / 3.7g$3.99Micro analog servo.
Learn More
Precise, jitter free response for small parkflyers or light 3D. -
Turnigy™ TGY-1440A Analog Servo 20T (V2) 0.8kg / 0.10sec / 4.4g$5.69Micro analog servo.
Learn More
Precise, jitter free response for small parkflyers or light 3D. -
Turnigy™ TGY-1501MG MG Servo 25T 15.5kg / 0.16sec / 63g$14.78Model: TGY-1501MG
Voltage: 4.8~6.0v
Speed: 0.16~0.14sec
Torque: 15.5~17.0kg/cm
Weight: 60g
Size: 40.7x20.5x39.5mm
Spline Count: 25Learn More -
Turnigy™ TGY-390DMH High Performance DS/MG Servo 5.4kg / 0.11sec / 22.5g$31.85TGY-390DMH High Performance Digital Servo (Extra Strong) 5.4kg / .11sec / 22.5g
Learn More
Specification:
Weight: 22.5 grams / 0.79 oz.
Dimensions: 29 x 13 x 30 mm / 1.14 x 0.51 x 1.18 inch
Torque @ 4.8V: 4.6 kg/cm , 64 oz/in
Torque @ 6.0V: 5.4 kg/cm , 75 oz/in
Speed @ 4.8V: 0.14sec / 60 deg at no load
Speed @ 6.0V: 0.11sec / 60 deg at no load
Twin ball bearing and full metal gears. High performance servo recommended for Airplane & Helicopter (Tail) -
Turnigy™ TR-1160A Mini Servo 25T 3.0kg / 0.11sec / 16g$6.19Mini analog servo.
Precise, jitter free response for small parkflyers or light 3D.Model: TR-1160A
Voltage: 6v
Speed: 0.11sec
Torque: 2.1kg/cm
Weight: 16g
Size: 29.6x28x13.2mm
Spline Count: 25Attention, servo gears can strip if more than 2.1kg of force is applied. Ensure your control surfaces and control rods/wires do not bind.Learn More -
Turnigy 3 Channel Servo Speed/Direction Regulator$9.42A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action.Weight: 3g
Input: 1 servo Channel.
Output: 3 Channels.
Options: Travel Speed & Travel Time in both directions.Learn More -
Turnigy TGY-225MG Analog High Torque Ballraced Servo 21T 3.5kg / 0.12sec / 26g$9.99Specs:
Model: TGY-225MG
Voltage: 4.5 - 6v
Speed: .12s
Running Current: 180mA
Torque: 3.5kg/cm
Gears: Metal
Weight: 26g
Spline Count : 21 ToothNarrow dead band width.
Learn More -
HX 5010 Twin bearing Digital Servo 25T 6.5kg / 0.16sec / 39.2g$8.60The HX5010 servo won't break any records, it won't astound you with its amazing torque or scare your friends with its ninja-like high-speed action, but it is a solid, reliable plastic gear servo that's economical and great for those that are not too serious about the specification.
HX5010 servos shipped as of Aug 1, 2014, are digital versions, no longer analog. Same great price, and even better performance!
Learn More -
HXT900 Micro Servo 1.6kg / 0.12sec / 9.8gSpecial Price $4.26 Regular Price $4.69HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9.8g servo.
Learn More
Features:
• Teflon bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included
Specs:
Size : 23x12x23 mm / 0.9x0.47x0.9 in
Voltage : 3v ~ 6v
Weight: 9.8g / 0.35oz
Speed: 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp: -30C~60C
Gears: Nylon White type
WARNING
Similar-looking servos can be found on eBay and other Asian sellers. However be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere! -
HXT MG-14 Digital Aircraft Servo 23T 2.6kg / 0.11sec / 14g$10.99The MG14 is one of our all time best selling and best value metal gear micro servos. Trusted by hobbyist world wide for its reliability and ruggedness in applications where plastic gear servos just don’t hold up. Now the MG 14 has entered the Digital age offering greater precision and reliability and also includeds a new aluminium case for extra cooling all at the same low price!Learn More -
Turnigy™ MG90S DS/MG Servo 10T 1.8kg / 0.10sec / 18g$7.65The Turnigy MG90S now features digital processing for greater precision. Same great performance, now with digital precision.All Turnigy MG90S servos shipped as of July 1, 2014 now feature a digital processor.Learn More -
Towerpro MG996R Servo 25T 11kg / 0.16sec / 55g$12.49This is essentially an upgraded version of the famous Towerpro MG995 servo. It now has a redesigned PCB and IC control system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
Learn More
All specifications are the same as the previous model MG995, however, this servo is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering. -
Blue Bird BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.3g$16.82BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.4gContinuing the Blue Bird tradition of affordable performance. By using carbon+30% POM gears and optimizing the curvature of the gears, the gears are able to withstand over 3.5kg of force. With a tolerance of less than 0.3 degree per PWM step, this servo is perfect for CCPM helicopter control, precision aerobatic aircraft, and 1/18 scale cars.
The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. 1. Carbon+30% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. High-torque motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Designed to be used in R/C helicopter applications.
6. Futaba compatible 25 tooth output splines
7. Metal gears of aluminum 6061 material combined with light and strong C95 material
8. 2PEW coated motor wire for high-temperature us
Learn More
Weight: 11.4 grams / 0.44oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.6kg/cm , 22 oz/in
Torque At 6.0V: 2.3kg/cm , 28 oz/in
Speed At 4.8V: 0.13sec / 60 deg at no load
Speed At 6.0V: 0.11sec / 60 deg at no load -
Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g$8.97Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.
Learn More
![]("http:/www.mks-servo.com.tw/images/speed-reaction.jpg"){kind=link}
Login and Registration Form