Power Systems

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Corona 939MG Metal Gear Servo 2.5kg / 0.14sec / 12.5g

Corona DS329MG Digital Metal Gear Servo 3.8kg / 0.11sec / 32g

Corona DS339MG Digital Metal Gear Servo 4.4kg / 0.15sec / 32g

Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g

Specs:
Constant Current: 20A
Burst Current: 25A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 30g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

Note: User manual can be downloaded from the files Tab.

Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 32g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

Note: User manual can be downloaded from the files Tab.

Specs:
Constant Current: 60A
Burst Current: 80A
Battery: 2-4S Lipoly / 5-12s NiXX
SBEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 70 x 32 x 17mm
Battery Wire: 14AWG
Motor Wire: 14AWG
Weight: 61g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

Note: User manual can be downloaded from the files Tab.

Replacement Pinion Gear 3mm - 22T / 0.4M

Replacement Pinion Gear 3mm - 24T / 0.4M

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

A standard car esc. providing forward and reverse with a large range of motor compatability for up to 240,000RPM motors. 

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-3S Lithium batteries / 4~9 Ni-xx
Cont. Current: 30A
BEC output: 2A /5V (Linear)
Size( length X width X high): 45x32x20mm
Weight: 51g
 

The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!

Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.

Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!

Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mm

Mount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mm

Not suitable for a plane heavier than 2kg
Strut & Landing gear not included

Standard 60A car esc with forward reverse and a good range of features such as timing adjust and braking. Supports a wide range of motors. Very reliable!

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-4S Lithium batteries / 4~15 Ni-xx
Cont. Current: 60A
BEC output: 3A/5V (Switch)
Size( length X width X high): 47x41x29mm
Weight: 82g

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Don't let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!

Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR

HobbyKing 939MG Metal Gear Servo 2.5kg/ 0.14sec / 12.5g
A strong performer with a very smooth movement and good centering.
Excellent for parkflyers or planes up to .40 size (3,500mAh electric).