Power Systems

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

NGH GF30 30cc Gas 4 Stroke Engine Replacement Camshaft Cover Plate.

NGH GF30 30cc Gas 4 Stroke Engine Replacement Tappet Housing.

NGH GTT70 70cc Twin Cylinder Gas Engine Replacement Backplate Mount.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (6S):
16x6: 876W, 42A, 3607g static thrust
17x6: 1044W, 50A, 4143g static thrust
17x8: 1275W, 62A, 5194g static thrust

Performance Data (8S):
13x6.5: 1060W, 38A, 3909g static thrust
13x8: 1240W, 44A, 4717g static thrust
14x8.5: 1610W, 58A, 5845g static thrust

Replacement motor for the Avious Spitfire MKVb 1450mm

The Power HD LW-20MG is the latest servo that features an all-aluminum case, copper and aluminum gears, a powerful coreless motor and it pulls up to 20kg-cm of torque at a speed of 0.16s. The standard sized servo is also waterproof making this a great servo for crawlers, 1/8 scale trucks and buggies. It comes black anodized and with laser-etched graphics.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

NTM PROPDRIVE 28 Series Accessory Pack For Short Shaft Version

Standard accessory pack for PROPDRIVE 42 series motors. CNC Machined from billet 6061 alloy for strength and balance. The propeller adapter is a press fit to ensure balance.

Standard accessory pack for PROPDRIVE 50 series motors. CNC Machined from billet 6061 alloy for strength and balance. The propeller adapter is a press fit to ensure balance.

PROPDRIVE 28 Series - Replacement Bearing Set 

PROPDRIVE 35 Series - Replacement Bearing Set

PROPDRIVE - Replacement Shaft for 4238 Motor

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and programmable start mode.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Turnigy T6A-V2 2.4GHz system is an entry level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

Turnigy T6A-V2 2.4GHz system is an entry-level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

The Turnigy SK8 5045-150KV Sensored Brushless Motor ideal for Electric Skateboard Conversions but can be used in many other applications that require a strong sensored brushless motor.

The Turnigy SK8 5045-195KV Sensored Brushless Motor ideal for Electric Skateboard Conversions but can be used in many other applications that require a strong sensored brushless motor.

The Turnigy SK8 5045-240KV Sensored Brushless Motor ideal for Electric Skateboard Conversions but can be used in many other applications that require a strong sensored brushless motor.