Power Systems

B36-60-06L Brushless Inrunner 4000kv.

Looking to make your video platform ultra-smooth? This is the ultimate in smooth high pole count purpose built brushless gimbal motors.

The 2804 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to our Brushless Gimbal Stabilization Board and IMU.

The 2804 is the perfect size for cameras around 100-300 grams (GoPro style).

Spec:
Poles: 12N14P
KV(RPM/V): 210
Resistance: 10.4omh
Weight: 35g
Wire: 0.19mm
Torque: 240g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

Turnigy EasyMatch Park250 Series - Replacement Shaft

Spec.
Shaft length: 34mm
Shaft diameter: 2mm

Turnigy EasyMatch G110 Series - Replacement Shaft

Spec.
Shaft length: 78mm
Shaft diameter: 13mm

Designed as a 50 to 80cc gas engine replacement, this motor is a direct bolt in for 17~30lb Sport, Scale and 3D planes .
A perfect size motor for 3D flight up to 20lbs.
The motor is very well built with strong mounts, end bell and a concentric double bearings at the rear to support large propellers and rotating can, especially during hard 3D flight.

This motor is very well engineered and of the highest quality.
The factory can produce only a limited number of these motors per month due to the increased time in balancing and machining such a large object.


Spec.
Model: 80-80-10
Resistance: 0.011ohm
ESC Required: 200A
Input Voltage : 30~50V
Kv : 160 rpm/V
Weight: 1545g
Shaft: 8mm
Non Load Current: 6.0A at 20V
Dimensions: 152x133x81mm (Including Mount)
Equivalent: 50-80cc Gas Engine

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
5.25x5.5: 48W, 6.7A, 323g static thrust
5.5x6.5: 62W, 8.5A, 412g static thrust
6x6: 74W, 10A, 466g static thrust

Performance Data (3S):
4.1x4.1: 58W, 5A, 284g static thrust
4.5x4.1: 74W, 7A, 363g static thrust
5x4.1: 100W, 9.5A, 472g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
9x6: 66W, 9.2A, 487g static thrust
10x4.7: 73W, 10.3A, 492g static thrust
11x4.7: 90W, 12.8A, 563g static thrust

Performance Data (3S):
7x6: 97W, 9A, 602g static thrust
8x4.5: 114W, 10.7A, 633g static thrust
8x6: 137W, 12.9A, 774g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
9x6: 49W, 6.8A, 407g static thrust
10x4.7: 55W, 7.7A, 414g static thrust
11x4.7: 68W, 9.7A, 480g static thrust

Performance Data (3S):
8x3.8: 75W, 7A, 460g static thrust
8x4.7: 87W, 8A, 542g static thrust
9x3.8: 103W, 9.7A, 582g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
11x5.5: 85W, 12A, 583g static thrust
12x4.7: 94W, 13.5A, 598g static thrust
13x5.5: 118W, 17A, 710g static thrust

Performance Data (3S):
8x6: 115W, 11A, 700g static thrust
9x6: 154W, 14.5A, 864g static thrust
9x7.5: 175W, 17A, 995g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
9x4.5: 91W, 13A, 547g static thrust
11x5.5: 112W, 16A, 688g static thrust
12x6: 138W, 19A, 800g static thrust

Performance Data (3S):
8x4.7: 130W, 12A, 702g static thrust
9x4.5: 172W, 16A, 852g static thrust
10x3.8: 200W, 19A, 908g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
12x6: 127W, 18.5A, 794g static thrust
13x6.5: 153W, 22.5A, 909g static thrust
14x7: 177W, 26.5A, 1002g static thrust

Performance Data (3S):
9x6: 179W, 17A, 964g static thrust
10x6: 227W, 22A, 1146g static thrust
6x4: 347W, 33A, 1183g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
8x6: 173W, 16A, 923g static thrust
9x4.5: 195W, 18A, 941g static thrust
10x3.8: 229W, 22A, 1013g static thrust

Performance Data (4S):
7x3.8: 183W, 13A, 789g static thrust
8x3.8: 267W, 19A, 1068g static thrust
8x4.5: 300W, 21A, 1216g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
9x7.5: 138W, 20A, 869g static thrust
10x6: 155W, 22A, 891g static thrust
11x5.5: 182W, 26A, 971g static thrust

Performance Data (3S):
8x4.7: 213W, 20A, 985g static thrust
9x4: 261W, 25A, 1100g static thrust
9x5: 299W, 28A, 1283g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
9x7.5: 302W, 29A, 1513g static thrust
10x5: 324W, 31A, 1474g static thrust
10x6: 341W, 33A, 1565g static thrust

Performance Data (4S):
8x4.5: 325W, 23A, 1311g static thrust
8x6: 396W, 28A, 1647g static thrust
9x4.5: 447W, 32A, 1683g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
9x4.5: 254W, 24A, 1162g static thrust
9x6: 310W, 30A, 1459g static thrust
10x6: 406W, 39A, 1790g static thrust

Performance Data (4S):
7x6: 318W, 23A, 1371g static thrust
8x4.7: 392W, 28A, 1529g static thrust
9x4.5: 526W, 38A, 1904g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
8x6: 322W, 31A, 1459g static thrust
9x4.7: 376W, 36A, 1549g static thrust
9x5: 392W, 38A, 1624g static thrust

Performance Data (4S):
7x6: 463W, 33A, 1789g static thrust
8x3.8: 490W, 35A, 1668g static thrust
8x4.5: 551W, 40A, 1909g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
11x5.5: 343W, 33A, 1621g static thrust
11x7.5: 418W, 40A, 2021g static thrust
12x6: 450W, 44A, 2015g static thrust

Performance Data (4S):
9x6: 440W, 31A, 1820g static thrust
10x5: 519W, 37A, 2026g static thrust
10x6: 586W, 42A, 2319g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
10x4.7: 352W, 34A, 1532g static thrust
10x6: 414W, 40A, 1840g static thrust
11x5.5: 497W, 49A, 2058g static thrust

Performance Data (4S):
9x4.5: 534W, 38A, 1938g static thrust
9x5: 574W, 41A, 2103g static thrust
10x3.8: 633W, 46A, 2115g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
9x7.5: 400W, 39A, 1880g static thrust
10x6: 453W, 45A, 1950g static thrust
11x5.5: 538W, 54A, 2163g static thrust

Performance Data (4S):
8x6: 520W, 38A, 2016g static thrust
9x4.5: 588W, 43A, 2064g static thrust
10x3.8: 689W, 51A, 2235g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (4S):
10x7.5: 422W, 30A, 2029g static thrust
11x7: 523W, 37A, 2338g static thrust
12x6: 593W, 42A, 2463g static thrust

Performance Data (5S):
9x6: 475W, 27A, 1981g static thrust
9x7.5: 559W, 32A, 2378g static thrust
10x6: 645W, 37A, 2503g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
11x4.7: 372W, 35A, 1669g static thrust
11x6: 440W, 42A, 2018g static thrust
12x4.7: 472W, 46A, 2000g static thrust

Performance Data (4S):
9x6: 525W, 37A, 2145g static thrust
9x7.5: 616W, 44A, 2566g static thrust
10x5.5: 665W, 48A, 2519g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
12x6: 455W, 32A, 2108g static thrust
13x5.5: 537W, 38A, 2330g static thrust
13x6.5: 599W, 43A, 2628g static thrust

Performance Data (5S):
10x8: 598W, 34A, 2640g static thrust
11x5.5: 601W, 35A, 2412g static thrust
11x6.5: 675W, 39A, 2750g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
13x6: 411W, 39A, 2014g static thrust
13x7: 454W, 44A, 2264g static thrust
14x6: 495W, 48A, 2298g static thrust

Performance Data (4S):
11x5.5: 513W, 36A, 2183g static thrust
11x7: 604W, 44A, 2625g static thrust
12x6: 685W, 50A, 2771g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
14x8.5: 532W, 38A, 2810g static thrust
14x10: 596W, 43A, 3190g static thrust
15x8: 618W, 44A, 3100g static thrust

Performance Data (5S):
13x5.5: 556W, 31A, 2455g static thrust
13x8: 734W, 42A, 3345g static thrust
14x6.5: 782W, 45A, 3333g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
13x6.5: 514W, 37A, 2469g static thrust
13x8: 598W, 43A, 2924g static thrust
14x7: 670W, 48A, 3087g static thrust

Performance Data (5S):
11x8: 656W, 37A, 2944g static thrust
12x6: 687W, 39A, 2840g static thrust
13x5.5: 814W, 47A, 3176g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (4S):
11x7: 516W, 36A, 2406g static thrust
12x6: 598W, 42A, 2603g static thrust
13x4.7: 633W, 45A, 2560g static thrust

Performance Data (5S):
10x4.7: 510W, 28A, 1997g static thrust
11x4.7: 688W, 39A, 2549g static thrust
11x5.5: 776W, 44A, 2920g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
19x10: 556W, 40A, 3321g static thrust
19x12: 626W, 45A, 3789g static thrust
20x12: 711W, 52A, 4145g static thrust

Performance Data (5S):
17x10: 725W, 41A, 3868g static thrust
18x10: 846W, 49A, 4331g static thrust
18x12: 950W, 55A, 4929g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (2S):
24x10: 251W, 36A, 2032g static thrust
25x12.5: 312W, 46A, 2489g static thrust
26x15: 370W, 55A, 2896g static thrust

Performance Data (3S):
19x10: 383W, 36A, 2589g static thrust
20x12: 492W, 48A, 3241g static thrust
21x12: 551W, 54A, 3510g static thrust

Performance Data (4S):
16x12: 566W, 40A, 3414g static thrust
17x12: 667W, 48A, 3852g static thrust
18x12: 770W, 55A, 4276g static thrust

Performance Data (6S):
14x8.5: 861W, 41A, 3905g static thrust
14x10: 969W, 46A, 4450g static thrust
14x12: 1100W, 53A, 5129g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
15x8: 566W, 40A, 2955g static thrust
15x10: 662W, 48A, 3525g static thrust
16x10: 787W, 57A, 4015g static thrust

Performance Data (5S):
14x7: 749W, 43A, 3343g static thrust
15x7: 912W, 53A, 3892g static thrust
16x6: 979W, 57A, 3954g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (5S):
15x7: 721W, 41A, 3302g static thrust
15x10: 930W, 53A, 4374g static thrust
17x7: 1024W, 59A, 4299g static thrust

Performance Data (6S):
13x6.5: 717W, 33A, 3064g static thrust
13x10: 991W, 47A, 4396g static thrust
15x8: 1268W, 60A, 5010g static thrust

Performance Data (7S):
12x6: 794W, 32A, 3099g static thrust
13x6.5: 1079W, 44A, 4038g static thrust
13x8: 1258W, 52A, 4792g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (5S):
13x8: 674W, 38A, 3132g static thrust
14x8: 837W, 48A, 3709g static thrust
15x8: 1014W, 58A, 4293g static thrust

Performance Data (6S):
12x8: 857W, 40A, 3584g static thrust
13x8: 1084W, 52A, 4313g static thrust
14x7: 1216W, 58A, 4558g static thrust

Performance Data (7S):
11x7: 896W, 36A, 3407g static thrust
13x5.5: 1233W, 50A, 4150g static thrust
13x6: 1315W, 54A, 4457g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (4S):
13x6.5: 631W, 45A, 2793g static thrust
13x8: 732W, 53A, 3308g static thrust
14x7: 819W, 59A, 3493g static thrust

Performance Data (5S):
11x8.5: 844W, 48A, 3506g static thrust
13x5.5: 997W, 57A, 3595g static thrust
12x8: 1036W, 60A, 4070g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (6S):
18x12: 1003W, 48A, 5232g static thrust
19x12: 1166W, 56A, 5850g static thrust
20x10: 1184W, 57A, 5653g static thrust

Performance Data (8S):
15x10: 1081W, 38A, 4932g static thrust
16x10: 1316W, 47A, 5740g static thrust
17x10: 1570W, 56A, 6566g static thrust

Performance Data (10S):
13x8: 1049W, 29A, 4255g static thrust
13x10: 1255W, 35A, 5191g static thrust
14x10: 1580W, 45A, 6230g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (6S):
17x8: 864W, 41A, 4084g static thrust
17x10: 1019W, 48A, 4897g static thrust
18x10: 1198W, 57A, 5530g static thrust

Performance Data (8S):
15x7: 1141W, 40A, 4531g static thrust
15x10: 1494W, 53A, 6104g static thrust
16x8: 1533W, 55A, 7025g static thrust

Performance Data (10S):
12x8: 1145W, 32A, 4363g static thrust
13x8: 1473W, 42A, 5349g static thrust
14x7: 1670W, 47A, 5715g static thrust